726 reviews analysed
1. Hygger 500W 300W Digital Quartz Aquarium Heater, Fast Heating Submersible Thermostat for Fish Tank 30-120 Gallon, with External IC Thermostat Controller and Thermometer
- ????【Fast Heating Up】voltage 110-120V/60HZ, power 500W, US three-pin plug, heater rod length 10.5 inch, 500W submersible heater for fish tank 60-120 Gallon. The heater power cord is 6ft, the controller power cord is 5ft, the thermometer cord is 4.6ft. Temp range: 61-90℉. Fast heating up aquarium heater, it takes about 3 minutes to heat 3.5 gallon water up 3℉
- ????【Fully Automatic Control】very easy and reliable to use. After finishing the temperature setting, the fish tank heater will run automatically by itself. It will stop heating when the water temp reaches to the set temp, please note that the water temp may go up 1℉ more because of the waste heat. When the water temp is cool down to 1℉ less than the set temp, the tank heater will restart heating
- ????【Quartz Tube & Plastic Guard】With high-quality quartz glass tube, it’s very durable and explosion-proof, this fish tank heater can be used for saltwater and freshwater aquariums, service life can be 3 years or more. With low profile black plastic guard, easy to hide in the tank. The guard can prevent your aquarium pets from burned, the gaps on the guard is about 3mm, no worries for fish stuck
- ????【Digital LED Display Controller】the external IC temp controller can show the water temp with 2 blue LED digits. Only show Fahrenheit degrees. To set the temp, just press the button over and over until the screen displaying the temp you desired, then stop and wait the digit flashing for 3 times, the setting is done and the led shows the current water temp again. The controller is connect with separate sensitive thermometer
- ????【Fully submersible Aquarium Heater】with strong suction cups on the heater guard and the thermometer, it’s easy to install the aquarium heater no to the tank walls or bottom, please keep them fully submerged. The thermometer should be away from the heater and keep water circulation as far as possible
2. Hygger Titanium Aquarium Heater for Salt Water and Fresh Water, Digital Submersible Heater with External IC Thermostat Controller and Thermometer, for Fish Tank 5-120 Gal
- ????【For Fish Tank 60-120 Gallon】voltage 110-120V, power 500W, heater rod length 12.3inch. The heater and controller power cords are the same length 5.5ft, the thermometer cord is 4.4ft. There are mounting holes on the temp controller back for hanging on the wall
- ????【Fully Automatic Control】very easy and reliable to use. After well installing the aquarium heater and the thermometer, you just need to set the desired heating temp, it will stop heating when the water temp reaches to the set temp, it will automatically restart heating when the water temp is 1℉ less than the set temp. The controller has temp setting remember function
- ????【Durable Titanium Tube】this seawater resistant titanium aquarium heater is good for use in salt water and fresh water, service life can be 3 years or more. Very compact small, easy to hide in the tank. Don’t suggest to use it in sump. The diameter of the titanium tube is19mm, you can buy suction cups suitable for this size when you need to get that replaced.
- ????【Digital LED Display】the IC temp controller can show the water temp and set temp at the same time, and there is a indicator light to show the heating status. You can press the ‘up’ key to shift degree unit between Celsius and Fahrenheit
- ????【Wide Temperature Range】With the thermostat controller you can set the temp from 32℉to 104℉, control precision is 1℉, please set the right temp for your aquarium pets. The separate thermometer can detect a temperature from -68℉ to 140℉, the measurement accuracy is 0.2℉ plus or minus, very sensitive
3. 500W 800W Aquarium Heater, Submersible Fish Tank Water Heater with External Color LED Digital Temperature Controller,PTC Ceramic Frequency Conversion Fast Heating for 60~180 Gallon
- ????LED DIGITAL DISPLAY CONTROLLER: ① Displays real-time water temperature or set temperature, three-digit display, water temperature display accurate to 0.1 °F, easy to read. ② 4 kinds of work instructions – Working/Malfunction/ Thermostatic/ Out of water, easy to understand. ③ Child Lock”KEY”: need to touch 3 seconds to set the temperature.
- ????RAPID HEATING: Fastest 5 seconds warming, with intelligent circuit board, work with new PTC ceramic thermal conductive material, the outside is wrapped with aluminum material to accelerate heat conduction and protection. Automatically reduces power when approaching the set temperature, fully utilizes thermal energy inertia to smoothly reach the set temperature, saving energy.
- ????INTELLIGENT THERMOSTAT: Over-temperature protection prevents “cooking fish”. When the water temp exceeds about 93.5 °F, start alternately flashing EE fault code
- and over 97℉, the heater will stop heating automatically. When the water temp cool down to 93℉, the heater will start working automatically. In addition, it has a power-off memory function and no need to set it again.
- ????ANTI-DRY PROTECTION: When the heating rod is exposed to air, display ER fault code and the heater will shut off automatically. When the heating rod is completely immersed in water, it will start working automatically. Effectively extend the service life. (PS: Suitable for freshwater only.)
- ????HIGH-QUALITY MATERIALS: Built-in dual temperature probe, real-time monitoring of water temperature, temperature accuracy of ± 1 °F
- high temperature resistant ABS material, no deformation and no softening, explosion-proof and anti-corrosion, no leakage of electricity. Strong suction cup bracket, can stably fix the heater in every corner of the fish tank.
????The outer casing is made of ABS material, which and can withstand certain gravity, effectively preventing damage caused by fish.
???? Excellent heat dissipation, surface hollowing design, can quickly dissipate heat into the water.
????Three-digit digital display, accurate to 0.1 °F, easy to grasp the temperature value and working status.
????Double temperature probe prevents the single temperature probe from being damaged and causing no heating or over temperature.
???? After the water evaporates, the heater is exposed to the water surface, it will automatically cut off the electricity.
????Over-temperature protection system, when the temperature in the tank is over 97 °F will stop heating, to avoid fish from boiling fish due to high temperature.
⏲Automatically remember the temperature, when used after power failure, the temperature no need to set.
☀Through the frequency conversion heating technology, and PTC ceramic materials, it can fully convert electric energy into heat energy, saving energy and safety.
Voltage: 110V-120V, 60HZ
Power cord length: 5ft+5ft
Temp Control Range: 70℉~94℉
Application: 60-120 gallon
1. When using this heating, the heating should be submersible in the water and should not be exposed to the water surface.
2. It is necessary to regularly clean and clean the heating plate. If the heating plate is attached with impurities, the heating efficiency will be reduced.
3. When the aluminum plate inside the heating plate is damaged, please stop using it.
4. Can not be used for saltwater and water with special materials.
4. Inkbird 1200 Watts Digital Temperature Controller Aquarium Thermostat for Aquarium Heater, with Waterproof Sensor
- Wifi & Free APP ????: Pair the aquarium temperature controller with your phone via 2.4GHz Wi-Fi, the device will alarm if there are exceptions. And all exceptions will be updated to the APP, the app will push notifications to remind you.(APP: ☞InkbirdSmart)
- Dual Protection ????: The wifi temperature controller is equipped with 2 relays(current relay) to ensure that the power can be turned off under any abnormal circumstances, will protect your fish from being hurt by overheated water
- Continous Heating Alarm ????The heating time can be set according to your needs from 1 hour to 72 hours. The controller will alarm once the water can not be heated to the setting temperature within the specified time. The temperature setting range is 20.0℃~35.0℃/68.0℉~95.0℉ and the measure temperature range is -40℃~100℃/-40℉~212℉.
- Easy to use ????: Plug and Play. The 10A 1200w programmable and prewired aquarium thermostat is compatible with most kinds of heaters, no need to assemble the product yourself, just plug and play.
- Dual probe for safety ????:The aquarium heater controller will alarm once the temperature difference between 2 probes is more than 5℉(3℃), and the app will push a notification at the same time.To protect your fish in a more safet environment
Temperature Control Range: -50~99 °C / -58~210 °F
Sensor Length: 2m / 6.56ft
5. Orlushy Mini Aquarium Heater 50W 100W 150W,Small Fish Tank Heater with LED Digital Temperature Display and External Temperature Controller for Betta Frogs Newts Turtles
- ★ 50W Submersible Aquarium Heater is Suitable for 3-15 Gallon.Temperature range: 65°F~93°F（18°C~34°C）, power cord is 5 FT.
- ★ LED Display Design: LED digital display, External temperature controller,easy to use and Safety.
- ★ The Digital Smart Aquarium Heater is a heater and thermometer combined into one, eliminating the need for more equipment in smaller tanks.
- ★ Please be sure that the heater needs to be completely sunk into water, horizontal or vertical fixed in the water cycle better place, and let the working light can be seen as clear as possible.
- ★ 12 Month Warranty and 24 Hour Professional After-sales Service.
THE Orlushy Digital Smart Aquarium Heater is a compact submersible 2 in 1 unit for smaller tanks. The Digital Smart Aquarium Heater is a heater and thermometer combined into one, eliminating the need for more equipment in smaller tanks. The unit sticks to the side of your tank with 2 suckers and is small enough to not protrude into the compact tank. The front has a clear to see display that is easy to set. Simply use the click switch on the power cable to set the desired temperature of your water. Once it is set the Smart Heater will show the actual temperature of the water on the display. Then it will automatically heat the water to the set temperature. The sensitive and reliable thermostat at the core of the oval shaped unit will then maintain a constant water temperature.
6. Inkbird ITC-308S Aquarium Heating and Cooling Dual Stage Temperature Controller Freshwater Saltwater Aquarium Tropical Fish Ornamental Shrimp
- ????????【Heating and Cooling】Controls both a heating and cooling/refrigeration device at the same time. This controller can also be used to easily control a single heating or cooling device.
- ????????【Applicable Scene】Because it has the powerful function of corrosion protection, it is very suitable for fresh water, sea water aquarium, coral cylinder, ornamental shrimp and tropical fish.
- ????????【Dual Display Window】Easy to set up,be able to display measured temperature and set temperature at the same time.Provides a temperature display of Celsius or Fahrenheit.
- ????????【Alarm for Safe】High and low temperature alarms,sensor failure alarm. Maximum output load: 1200W(110V).
- ????????【Term of service】Purchase products and get a one-year warranty.
7. IceProbe Thermoelectric Aquarium Chiller – 4 in. x 4 3/4 in. x 7 1/2 in.
This is the ideal cooling solution for small aquariums. This quiet, reliableefficient chiller uses advanced thermoelectric technology to directly convert electricity into cooling power. Can be easily bulkheaded through a 1 1/4″. hole into siphon overflows, prefilters, sumps or even directly into plastic aquariums.Provides continuous chilling when plugged in to a power source, it does not have an on/off switch. A separate temperature controller must be used to turn the device on or off at pre-determined temperatures. A single IPAC-50W chiller can cool 10 gallons of water 6F to 8F,20 gallons of water 3F to 4Fand 40 gallons of water 1F to 2F below ambient air temperature in a standard aquarium. For greater cooling multiple units can be used.
8. Yosooo Aquarium Thermostat, 100-240V Digital Fish Tank Water Cooling Heating Machine Fish Tank Chiller Heater for Small-Scale Refrigeration Heating Aquaculture
- ✔Semiconductor refrigeration, environmental protection without pollution
- ✔Mute, low-power design
- ✔Digital display and advanced microcomputer intelligent temperature control technology are adopted
- ✔Celsius temperature and Fahrenheit temperature switching function
- ✔Suitable for small-scale refrigeration heating, aquaculture, aquarium
Model: STC-200 35L
Rated voltage: DC12V
Rated frequency power: 70W- 100W
Circulating water pump flow: 1-3L/min
Water pump vertical lifting height of three meters below
Product size: 115*110*190MM
Net weight: 1.87KG
Water pipe connection operation procedure:
The 2M divided into two pipes（Length can be determined according to their own use）, respectively set tube buckles on the pipe, connecting the inlet and outlet pipe clamp the buckle fixed tightly connected to the pump and the power supply can be used directly.
1. Switch on the power, the water began to circulate, and see if there is any leakage.
2. Connect the power cord of the cold water machine, plug the power plug, press the power switch to turn on the power supply, the display screen will display the water temperature in the fish tank.
Installation and use:
A. install the connection as shown in figure.
B. machine and the surrounding space to maintain a distance of more than twenty cm, in order to facilitate the flow of heat.
C. Transportation, installation, maintenance, please handle with care.
Please use AC220V or 110V power supply, please do not use other power supply (according to the different regions of the use of the power supply voltage is not the same, can not be universal, please note);This product is prohibited to be placed in a stable, high temperature, direct sunlight, smoke, ventilation, moisture in a large location;Prohibition block the vents. Do not store foreign objects near the vents;To prohibit the insertion of metal debris, wire, needle and other foreign matter in the product interior or in the gap of the product.
9. UPETTOOLS Submersible Aquarium Heater, Aquarium Fish Tank Water Thermostat, Adjustable for 3~120 Gallon with Temperature Controller 50W/100W/250W/300W/500W 2 Suction Cups
- ????????????500W Submersible Aquarium Heater is Suitable for 60-120 Gallon.Aquarium Heater Made Of High Quality Quartz, Double Seal Material , Advanced Design To Ensure Safe Operation. The Aquarium Heater has Explosion-Proof Function While Being Also Shatterproof And Waterproof.
- ????????????Adjustable Temperature Fish Tank Heater, Use Intelligent Temperature Chip Control Circuit, With External Temperature Adjustment Function. The Temperature Range In This Accurate Thermostat Is 15-32 ℃(60 -90℉).
- ????????????Fish Tank Thermostat Need To Be Fully Submersible And Can Be Placed Horizontally In Your Tank. The Aquarium Heater Thermostat Has Two Suction Cups On It Which Make It Easy To Attach To Fish Tank,Which is Perfect For Freshwater Or Seawater Aquarium.
- ????????????Our Submersible Tank Heaters Are Perfect Designed For Different Size Tank, From 60-120Gal, Please Choose The Suitable Power For Your Tank. And We Also Recommend To Position It Near A Strong Water Flow, So That The Whole Aquarium Are In The Same Temperature.
- ????????????Automatically Stop Heating When The Heater Rod is Out Of Water,The Actual Water Temperature Tolerance Is ±2℉ Of Setting Temperature.
Upettools aquarium heater suitable for saltwater and fresh water.This fish tank heater are easy-to-use and work in aquariums ranging from 3 to 120 gallons
Dual CPU Safety Design
This aquarium heater is safety and durable, Fish tank heater will cut of power automatically when the heater leave water
This fish tank heater adopting the quartz glass, more suitable for heating and heat keeping
Advanced Waterproof Level
IPX8, Compact heater is 100% submersible use only
Easy to Set Up
Vertical or horizontal installation and ensure the aquarium heater is fully submerged underwater
Applicable for freshwater and marine aquariums aquaculture glass containers and hydroponic systems
1* Submersible Preset Heater
4* Stable Suction Cups
1* LED Digital Display Thermometer
1* User Manual
10. PERSUPER Submersible Aquarium Heater Adjustable LED Digital Temperature Display Fish Tank Heater for Turtle Betta Fish Water Heater with Protective Guard
- Accurate temperature control: the intelligent IC chip is used for the aquarium heater. Press and hold the temperature control button for 3 seconds, switch between Fahrenheit and Celsius, and it is easy to control the temperature between 68 ° f / 20 ° C and 94 ° f / 34 ° C
- this heater provides the best living environment for your aquatic organisms.
- Safety assurance: it adopts the highest waterproof grade IP68, titanium pipe material, explosion-proof and anti-corrosion. When heating, it is more resistant to damage than the traditional glass heater, and has the function of overheating and water shortage protection. External temperature controller: touch the button controller to adjust the temperature without wetting your hands.
- Automatic constant temperature function: when the water temperature reaches the specified temperature, the heater will automatically stop heating, when the water temperature is lower than the set temperature, the heater will automatically start heating.
- Easy to use: submersible heaters are suitable for all types of aquariums
- they are installed vertically or horizontally to ensure that the equipment is completely submerged. The heating rod shall be completely immersed in water and cannot be heated without water. Please unplug the power supply when cleaning the fish tank or replacing the water in the fish tank.
- Wide compatibility: aquarium heater with CE, FCC and ROHS certification, plug with UL certification
- suitable for fresh water and marine aquarium, aquaculture, glass containers and aquaculture system. 12 months warranty, 24-hour professional after-sales service.
By our suggestions above, we hope that you can found Water Heating Aquarium for you.Please don’t forget to share your experience by comment in this post. Thank you!