The Best Vacuum Chamber Resin

Related Series: Only Items in Bold are available on Amazon.
Universal Chamber Series:1.2Quart/2Quart/1.5Gallon/3Gallon/5Gallon. ( a.co/6FhbPAw )
BACOENG Chamber Series: 2Quart/1.5Gallon ( a.co/dGQZsqm;  a.co/gGmUEnb; )  
BACOENG Vacuum Pump Series : Mini/Standard/Advanced/Premium ( a.co/euZtOXz )
BACOENG Vacuum Chamber Kit: 1.5GallonKit/3GallonKit/5GallonKit.  All Equipped with BACOENG Vacuum Pump Standard. ( a.co/dpnJv3r; a.co/evTRJbw)
BACOENG AC Recharge Kit: With Mini Pump/With Standard Pump

Specifications:
Pumping speed: 3.6 CFM
Ultimate vacuum: 0.8Pa
Rotating speed: 1720 Rpm
Oil capacity: 225 ML
Power: 1/4 HP
Voltage: AC 110V
Inlet valve: 1/4″ SAE
Features:
3.6 CFM Single-Stage Rotary Vane gas vacuum pump
High efficiency and Low Noise Decibels
Heavy-duty aluminum Alloy Casing
Direct Drive Maintenance Free Motor permitting straightforward starting
Clear Oil Sight Glass to easily monitor Oil Level
Internal High Volume Cooling Fan for Extended Periods of Use
Exhaust Port with an included Exhaust Cap

Updated on May 17th, 2017:  Update Adaptors for hose.  This Update reduce the risk of leakage when installation.

Updated on Sep 20th, 2016:  Use a Metal Air Regulator and Glycerin filled Gauge for this series. This update reduce the risk of gauge damage. (Some customers released vacuum too quickly, which damaged gauge permanently)

Related Series: Only Items in Bold are available on Amazon.
Universal Chamber Series:1.2Quart/2Quart/1.5Gallon/3Gallon/5Gallon. ( a.co/6FhbPAw )
BACOENG Chamber Series: 2Quart/1.5Gallon ( a.co/dGQZsqm;  a.co/gGmUEnb; )  
BACOENG Vacuum Pump Series : Mini/Standard/Advanced/Premium ( a.co/euZtOXz )
BACOENG Vacuum Chamber Kit: 1.5GallonKit/3GallonKit/5GallonKit.  All Equipped with BACOENG Vacuum Pump Standard. ( a.co/dpnJv3r; a.co/evTRJbw)
BACOENG AC Recharge Kit: With Mini Pump/With Standard Pump

Kit Contents:
1.Universal Silicone Gasket
2.2 Quart Stainless Steel Chamber.
3.Plumbing System With Liquid Filled Stainless Steel Vacuum Gauge.
4.Unique Metal Air Regulator .
5.Reinforced Vacuum Hosing Connect Directly To Vacuum Pump 1/4″ SAE.
6.Non Stick Silicone Mat.

FEATURES:
1).Internal Dimensions：4.4”(H) x 5.4”(OD)
2).5inch Reinforced Vacuum Hosing Connect Directly To Vacuum Pump 1/4″ SAE.
3).2 Quart Vacuum Chamber kit used to degases silicons, epoxies, essential oils, urethane, etc.
4).Silicone gasket to be used over 10,000 times without deterioration.

Features:
durable stainless steel container with chemical-resistant silicone gasket
acrylic lid, high strength and drop resistance, provides safety
Industrial tables resist vibration and maintain accurate measurements
The shutoff valve turns, the vacuum pump closes, and the vacuum chamber can remain high for several hours
Specification:
Maximum Rated Vacuum: 29 inHg at sea level
Maximum operation temperature: 160°F
Dimension of the chamber: 9″Dia x 8″H (23x20cm)
Thickness of the lid: 11/16″ (18mm)
The length of the steel wire hose: 56″ (1.42m)
Dimension of the silicone pad(LxW): 8″ x 8″ (20x20cm)
Package Content:
1x Vacuum Chamber with Lid & Gasket
1x Gauge with Fittings
1x Hose
1x Silicone Pad

Explanation of compatibility:
incompatible with stable resins (e.g. cactus juice, crocodile venom, mink wax, etc.), alcohol, ethanol, acetone and acrylic monomers or polymers.The lid can only be washed with soapy water.

NOTE:
The hole on the acrylic lid may be smaller than the fittings. Our purpose is to avoid the situation that the hole is too large for the fittings. If the fitting hole is smaller, the customer can enlarge the hole to fit the fittings.
Hope you can understand if you meet such situation.

Protect your equipment! These vacuum-sealed tanks are installed in the vacuum bagging process between the mold and the vacuum pump to capture excess resin that enters the vacuum line before it can damage your equipment. Resin traps are an integral part of all vacuum infusion and vacuum bagging processes. Our Stainless Steel resin traps come equipped with clear lids that allow you to easily monitor resin accumulation.

Safety Information:

If large amounts of mixed resin remain in the feed pot or accumulate in the catch pot, the resin can become very hot indeed. In extreme circumstances, the resin can actually start smoking as it reaches very high temperatures.  

Keep an eye of the catch pot and wait for the exotherm to die down. 

TIPS:

Apply mold release to all interior surfaces of the resin trap prior to lay-up for easy clean-up once the vacuum process is complete.

Additional containers can be placed in the large 3 gallon tank to collect the resin.

This Kit Includes:

• 1 × Stainless Steel Pot
• 1 × Clear Lid
• 1 × Glycerin-filled Gauge
• 1 × Air Manifold
• 1 × Resin Catch Hose
• 1 × Vacuum Hose

Chamber Size:

• 3 Gallon 9.8″(ID) × 9.8″(H)
• 1.2 QT, 4.3″(ID)× 3.9″ (H) 
• 2 QT, 5.1″(ID)× 4.3″ (H)