809 reviews analysed
1. Vacuum Suction Pen IC SMD SMT BGA Chip Pick Up Tool Pump Vacuum Pick-Up Tool Suction Pen 110V 12000pa
Feature
- 110V electrical pick up tool for IC SMD SMT BGA Chip Pick-up, Vacuum suction pump for BGA repair accessories.
- Vacuum suction pump with adjuster and you can adjust vacuum suction pressure. Suction range: 0-12000pa. Do not worry SMD components sucked up to the solder paste printed on the paste after the phenomenon was sucked back.
- Come with two pens. Both of them can be used at the same time for two workers to share on the assemble line.
- Easy operation. Block the hole with a finger on the pen to pick up a component, open the hole to release the component.
- Package include: 1 x Pump Vacuum Suction Pen Placement Machine, 2 x Vacuum Suction Pen, 2 x Tube, 3 x Needles (1.6mm), 2 x Sucker (3mm,10mm)
Description
A machine for two simultaneous operation and single patch speed in 2 seconds 1PCS range.The unique static noise design makes the machine work quietly. (Such as BGA, QPF and other large IC can be used to operate the suction cup, with your fingers to block the use of a large number of components, such as BGA, QPF and other large ICs can be used to hold the SMD components. There is a hole in the pen suck, put the finger after the release of the release).We put the machine’s suction range strictly control the viscosity of the solder paste, the machine’s suction size adjustable knob, so do not worry SMD components sucked up to the solder paste printed on the paste after the phenomenon was sucked back.
Specification
Suction can be adjusted
Every unit comes with two pens. Both of them can be used at the same time for two workers to share on the assemble line. One can be a unplugged for back up.
Vacuum pressure adjustable
Easy operation. Block the hole with a finger on the pen to pick up a component, open the hole to release the component.
Voltage: 110V
Suction range: 0-12000pa
Tube length: 80cm
Chuck length: 120mm
Power cable length: 87cm
Size: 175*90*78mm
Weight: 1.5Kg
Package Included
1 x Pump Vacuum Suction Pen Placement Machine
2 x Vacuum Suction Pen
2 x Tube
3 x Needles (1.6mm)
2 x Sucker (3mm,10mm)
2. uxcell Vacuum Pen with 3 Suction Pads Desoldering Suction Pen Solder Extraction Removal Tool White for IC SMD Chip Mobile Phone Screen Replacement 2pcs
Feature
- Pen Size: 15 x1.2cm / 5.9 x 0.5 inch (L*D)
- Color: White
- Material: Plastic and Metal
- Package Content: 2 x Vacuum Pen with Bending Needle
- 6 x Suction Cups
- This fast action solder removal tool will help you complete the task quickly and safely.
- 3 suction headers are provided with this handy suction pencil: large size for 40g, medium size for 18g, small size for 3g.
Description
Description:
3 suction headers are provided with this handy suction pencil: large size for 40g, medium size for 18g, small size for 3g.
Specification:
Product Name: Vacuum Pen with Header
Color: White
Weight: 51g
Material: Plastic, Metal
Pen Size: 15 x 1.2cm / 5.9 x 0.5 inch (L*D)
Package Content:
2 x Vacuum Pen with 1 Bending Needle
6 x Suction Cups
How to Install:
a. Install a proper IC suction header on this suction pencil.
b. Place the suction header lever on IC.
c. Press down the button on the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC.
d. Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.
3. Lheng IC SMD Pick up Vacuum Sucking Pen with 3 Suction Headers+PLCC IC Extractor+Chip Spring Assisted
Feature
- Low-cost alternative to tweezers for the pickup and placement of delicate SMD components
- 3 suction headers are provided with this suction pencil, respectively for: 10mm,7mm,3mm
- Simple design allows one-handed use, lightweight aluminum alloy pen material, suck the solder away easily
- Soft ESD-sate conductive silicone suction cups avoid scratch or damage sensitive parts,Very sturdy,will worke good to remove existing solder from a circuit board
- Heated up the solder pushed the butto,all solder sucked up,super easy to use for desoldering,It is recommended to humidify or lubricate before, just click on the water or click on the lubricant to have a suction effect on the smooth surface, and it is not able to absorb the rough surface
Description
Specification: Material: Meta, Rubber Total Length: 160mm Suction cup sizes: 10mm/7mm/3mm Package Content: 1 x Vacuum Sucking Pen 3 x Suction Header 1 x PLCC IC Extractor 1 x Chip Spring Assisted Usage: 1. Install a proper IC suction header on suction pencil. 2. Place the suction header lever on IC. 3. Press down the button on the suction pencil to let out the air within the vacuum unit,then release the button to produce vacuum suction force to pick up IC. 4. Put the IC on a proper place,press down the button,the vacuum unit discharges air to let the IC fall off the suction header.
4. Aoyue 968A+ SMD Digital Hot Air Rework Station
Feature
- 4 in 1 repairing station with a Hot Air, a 70Watt Soldering Iron, vacuum pickup and a Smoke Absorber
- Maintains a constant set temperature when the set and the value is reached
- Digital display for the Hot Air of the actual and set temperatures with touch control
- Built in Air Flow gauge and knob adjustment for the air flow
- Digital Display for soldering iron and a digital calibration and auto sleep function
Description
The NEW 968A+ has the following new features: 70 watt soldering iron with smoke absorber, Digital Display for the Soldering Iron Temperature, Soldering Iron Holder, Vacuum Pickup Kit, 10 Soldering iron tips, Spare Heating Elements for the iron and the hot air, Digital Calibration and Adjustable sleep timer for the soldering iron.
The Quality and features available on this unit are the best in the industry.
Soldering Iron Features: 70 Watt Iron using low cost standard tips Creative built-in smoke extractor that absorbs the fumes created at the source when soldering. Digital Display Digital Calibration Feature Microprocessor controlled element for precise temperature control Adjustable sleep timer Configurable soldering iron holder that uses a sponge or a brass coil
Hot Air Features Microprocessor precisely controls temperature and airflow Visual Air Flow gauge Microprocessor controlled with self-testing hot air heating core system which warns user when aging or breakdown of the heating core occurs. Maintains a constant set temperature when the set and the value is reached Digital display of hot air set and actual temperature. Auto cool-off process that leaves the blower on until the nozzle is cool, this prolongs life of the heating element and to ensure safety.
ESD Safe Unit that meets CE and RoHS.
Package List: 968A+ station with hot air gun 70 Watt Soldering iron with Silicone Cord Hot air gun holder Soldering iron holder made of Aluminum and with sponge and brass coils. Vacuum Pickup kit with 3 suction cups to easily pickup IC’s Spare Heating Elements for the Hot Air Gun and the Soldering Iron 10 Soldering iron tips (T-B, T-LB, T-0.8D, T-1.2D, T-1.6D, T-2.4D, T-1C, T-0.5C, T-I(installed in soldering iron)) IC popper 5 Air nozzles ( 1124,1130, 1196, 1197, 1313 BGA-M) 2 Filter pads Instructions Power cord
Note:Solder is not Included SRA Soldering Products is the Exclusive Distributor and will handle warranty repairs after the first 30 days (for issues within 30 days contact Amazon directly). The warranty period is 1 year after shipment. Heating elements and soldering tips are not covered under warranty. Please contact [email protected] for service or spare parts or call 1-800-545-4750.
5. Hot Air SMD Rework Station 100-500 °C Heat Gun Temperature & Air Speed Adjustable LED Screen Display with 3 Air Nozzles IC Puller Desoldering Pump Anti-static Tweezers Cutter
Feature
- Professional Hot Air Gun – Soft air design is specific for hot-sensitive SMD work or reflow soldering, the surrounding plastic parts will not be deformed. Inner overheat protector to avoid high temperatures damaging the SMD components and hot air gun. 8 speed of adjustable airflow and 3 air nozzles direct a concentrated heat flow to the work surface of small chips to large chips. Durable brushless motor and turbofan combination, working noise are less than 45dB, let you focus on your jobs.
- Powerful Features – 1. Fast Heating: PID technology maintains a rapid heat rising, quickly heat up to the set temperature within 3-5 seconds(max temp. 500℃). 2. Intelligent temperature memory: Back to work, turn the hot air station on, you can pick up the hot air gun and work directly without the need of choosing the appropriate working temperature again. 3. Automatic Cooling Down: The heat gun can automatically turn on or off when you lift it from or on the cradle. And put the heat gun nozzles
- Digital LED Screen – Large LED digital screen displays every work state of the hot air rework station, Current Temperature, Standby and No handle insert(no detected heat core).
- Specification – Operating Voltage: AC110V, Output Power:700W, Noise: Less than 45dB, Temperature Range: 100 ℃ to 500 ℃, Handle Length: 120cm. Great for soldering or de-soldering SOIC, CHIP, QFP, PLCC, BGA, and cell phone repair, laptop computer repair, circuit board components repairing, etc.
- Package Included(12in1) – 1x 858D Soldering Station Unit 1x Hot Air Gun 3x Air Nozzles 1x Solder Sucker 1x Mini Screwdriver 2x Tweezers 1x Knife 1x IC Extractor 1x Manual. We offer a 1-year warranty and if you are not satisfied with our rework soldering station, please feel free to contact us. Order yours now, make your soldering easier and professional.
Description
Toolour Hot Air Station is a great rework helper tool for soldering, electronics repairing, de-soldering to remove SOIC, CHIP, QFP, PLCC, BGA, no pins destroyed.
High temp resistance fiberglass and brushless fan used on the heat gun makes the temp and wind flow control more stable.
When the heat gun put back to the shelf, it stops heating and starts cooling down automatically.
Offer 8 holes(senor, magnet switch, ground, the heat gun, heat stuff) cable to prevent potential electric shock and for ESD protection.
Specifications
Model: 858D
Package Size: 10.2*6.8*6inch
Rated Voltage: AC110V
Power consumption: 700W
Blower fan: Brushless fan
Amount of wind: 120L/M(MAX)
Temperature scope: 100°C~500°C(212℉~932℉)
Handle length: 9inch
Package Includes:
1x Soldering Station Unit
1x Hot Air Gun
1x Holder
1x Solder Sucker
1x Mini Screwdriver
2x Tweezers
1x Knife
1x IC Extractor
3x Nozzles
1x Manual
Note: Please Don’t touch the nozzle while the hot air gun in work as the high temperature.
6. YIHUA 948-II 4 in 1 Hot Air Rework Soldering Iron and Desoldering Suction Tin Gun Station with Suction Pick Up Pen °F /°C
Feature
- 【Three in one design】This unit features a 75 watt De-soldering station, a 650 watt hot air gun, a 60 Watt soldering station.
- 【Digital Temperature Correction】If the environment affects or replaces the heating element, soldering iron as well as other parts, the temperature of the soldering iron will deviate from the display, which can be corrected by this function.
- 【PID Temperature Control Technology】 Implanted the highest-end precision PID temperature control program, the machine can monitor and correct the actual temperature of each soldering station at high speed with fast temperature compensation.
- 【No Air Protection】If the fan of hot air gun stops unusually during the use, the program will automatically set an alarm and cut off the power supply to the heating core to ensure safety.
- 【More User-friendly Features – 1 Year US Warranty】Celsius / Fahrenheit Temperature Display, Sleep function, Air gun automatic / manual. Cool / hot air conversion at the flip of a button. 1 Year Warranty.
Description
Quiet yet powerful, practical but stylish and simple to use with advanced technology, YH 948 II has all the hallmarks of a top quality appliance for de-soldering. Featuring PID technology which is ideal for real-time temperature correction and make it more stable with less error.
Space saving, this four in one machine is designed based on the market needs, which combines together with hot air gun rework station, desoldering station, soldering iron and suction pen functions and brings you convenience.
What’s in the box?
1 xYH 948-II 3 IN 1 HOT AIR REWORK AND SOLDERING STATION
1 x YH 948-II SOLDERING IRON WITH SILICONE CORD
1 x YH 948-II DESOLDERING GUN WITH SILICONE CORD
4 x DESOLDERING GUN NOZZLES (0.8mm, 1.0mm, 1.2mm, 1.2mm)
1 x YH 948-II HOT AIR GUN WITH SILICONE CORD
1 x EXCLUSIVE SOLDERING IRON STAND WITH A BLUE CLEANING SPONGE
1 x YH 948-II VACUUM SUCTION PEN
1 xSUCTION PICK-UP TOOL WITH 2 VACUUM PROBES & 4 SILICONE VACUUM CUPS
4 x HOT AIR GUN NOZZLES (4.4mm (0.17″), 7.0 mm (.27″), 9.0mm (.35″) and 12.0mm(.47″))
1 xCERAMIC COLUMNED HEATING ELEMENT
1 xPINPOINT ANTI-STATIC/ANTI-MAGNETIC TWEEZERS
1 xROLL OF GOOTWICK
1 x SOLDERING PASTE
1 x IC POPPER
OTHER SPARE PARTS
Specifications:
- Maximum power: 725W
- Power supply voltage: 110V
- Working temperature: 32~104℉/0~40℃
- Storage temperature: -4~176℉/-20~80℃
- Hot air gun part:
- Power: 650W
- Temperature range: 212℉~896℉
- Air mode: brushless fan and soft air
- Maximum Air flow: 120L/min
- Display mode: LED digital tube
- Temperature stability: ±1.8°F/1.0°C(static)
- Desoldering station part:
- Power: 75W
- Temperature range: 662℉~896℉
- Tin soldering pump power: 12W
- Vacuum degree of tin soldering pump: 0.12 MPa
- Display mode: LED digital tube
- Temperature stability: ±1.8°F/1.0°C(static)
7. Weller WE1010NA Digital Soldering Station
Feature
- This unit is 40% more powerful than the two models it is replacing to help get your soldering job done faster
- Easy to handle high performance 70W soldering iron with a heat-resistant silicon Cable for safe handling
- Temperature stability (+/- 4⁰f, 2⁰c) and temperature lock protects tips and components, affording a consistently high quality process with repeatable soldering results
- This unit is loaded with cutting edge features sun as intuitive navigation, a Standby mode and auto setback conserves energy and password-protection to Preserve settings
- Includes: one (1) We1 station 120V, one (1) Wep70 tip retainer, one (1) Wep70 iron, PH70 safety rest with sponge, and Eta tip 0.062”/1.6 mm screwdriver
Description
Get it soldered! Weller introduces a new soldering station designed for vocational and professional uses. The we station is ready when you adjust switch it on and start soldering.
8. HKCB IC SMD Pick Place Vacuum Sucking Pen Remover Tool with 3 Size Suction Headers
Feature
- Product Name:Vacuum Sucking Pen
- Material: aluminum & plasic
- Color:Pen ,silver tone
- Suction cup ,black.
- High quality: soft conductive silicone suction cups do not scratch or damage sensitive parts.
- Package: Contains 3 size of suction headers ( small size for 3g , medium size for 18g and large size for 40g ).
- Usage: Put the IC on a proper place press down the button the vacuum unit discharges air to let the IC fall off the suction header.
Description
Material: aluminum & plasic
Total Length: 152mm Suction cup
sizes: 10mm/7mm/3mm
Package Content: 1x Vacuum Sucking Pen 3x Suction Headers
Put the IC on a proper place press down the button the vacuum unit discharges air to let the IC fall off the suction header.
9. YIHUA 853D 2A USB SMD Hot Air Rework Soldering Iron Station, DC Power Supply 0-15V 0-2A with 5V USB Charging Port and 50 Volt DC Voltage Test Meter
Feature
- 【3 in 1 design】it combines together in one common unit: soldering station, rework station and DC stabilized switching power supply, these three functions can be used independently or simultaneously.
- 【PID Temperature Control Technology】The machine detects the actual temperature at high speed and corrects it. The temperature compensation speed is fast and the error is small.
- 【Humanized Functions】Celsius/Fahrenheit conversion: Sleep function: Digital temperature correction: Hot air gun Manul / automatic function
- 【No Air Protection】If the fan of hot air gun stops unusually during the use, the program will automatically set an alarm and cut off the power supply to the heating core to ensure safety.
- 【1 Year US Warranty – USA Exclusive – 110V~127V/AC, 60Hz with the USA plug 】
Description
The NEW 2019 Upgrade Version Model YH-853D 2A USB New panel design, give you a good visual experience and of high quality.
REMOVABLE soldering iron, more secure and convenient. The interface with insulation material to avoid leakage.
Suitable for a variety of component desoldering and soldering, such as: SOIC, CHIP, QFP, PLCC, BGA, SMD, etc.(especially for mobile phone repair)
Providing power supply for mobile phone repair and circuit board voltage test, detecting mobile radio signal’s strength, etc.
What’s in the box?
1 x YIHUA-853D 2A USB 3 IN 1 Hot Air Rework Station Soldering station and DC Power Supply
4 x Hot air gun nozzles
10 x Assorted Sizes of Soldering Iron Tips
1 x IC Popper
1 x solder sucker (golden)
1 x Anti-static Tweezers
1 x Leed-freesolder tin wire (0.8mm 50g)
1 x Roll of Gootwick
Specifications:
- Model: YIHUA 853D 2A USB
- Power Consumption: ≤800W
- Working environment: 0~40°C/32~104°F
- Storage environment: -20~80°C/-4°F~176°F
- Store humidity:35%~45%
- Hot air gun
- Airflow type: Brushless fan gentle wind
- Air Flow: Fan air flow: ≤120L/min
- Temperature Range: 100°C~480°C/212°F~896°F
- Temperature Stability: ±1.8°F/±1°C (static)
- Display Type: LED Digital Display
- Soldering iron
- Temperature Range: 200°C~480°C/392°F~896°F
- Temperature Stability: ±3.6°F/±2°C (static)
- Tip of ground voltage: <>
- Tip ground impedance:<>
- DC power supply
- Output Voltage: DC 0V~15V ±10%
- Load stability: <0.01>0.01>
- Temperature coefficient: <300ppm>300ppm>
- Ripple dB: <1mvrms(virtual>1mvrms(virtual>
- Output current: 0-2A adjustable
Conclusion
By our suggestions above, we hope that you can found Smd Vacuum Pencil for you.Please don’t forget to share your experience by comment in this post. Thank you!