712 reviews analysed
1. Nilight LED Light Bar Wiring Harness Kit 12V On Off Switch Power Relay Blade Fuse for Off Road Lights LED Work Light,2 years Warranty
- Universal fit: compatible with all automobiles, boats and devices equipped with a 12V power source
- CIRCUIT PROTECTION: Power relay-safety protection and conversion circuit. Blade fuse protects the circuit when overcurrent or short circuit occurs.
- ILLUMINATED SWITCH: 3 pin on/off rocker switch with red indicator light when truing on, easy to turn on or off, has been passed test of 5, 000 times pressing.
- TWO AVAILABLE LEADS: With 2 sets of light output connectors for dual lighting fixtures less than 180W, the connection is more stable.
- PACKAGE INCLUDE:1 x Wiring Harness Kit ,1 x Instructions,
10ft wiring harness, 2 sets of connectors to light fixtures
illuminated on/off toggle switch – can easily turn on/off the lights.
Inline blade fuse & relay – multiple safety protection.
Maximum Wattage: 180W; Max Ampere: 15A
Operating Voltage: 12V DC Power
Please finish the installation by professionals or install the wiring harness under the guidance of professionals.
2. Motor Trend MT-923-BK Black FlexTough Contour Liners-Deep Dish Heavy Duty Rubber Floor Mats for Car SUV Truck & Van-All Weather Protection
- Flex Tough – Our Advanced Performance Rubber Polymers are Tested for Extreme Conditions to Ensure they Don’t Crack, Split or Deform
- No-Slip Grip – Rubberized Nibs on the Bottom so the Mat Does not Move – Ergonomic Grooves on Top to Give your Foot Traction & Comfort
- Built for Protection – Guard Against Spills, or Debris – Built to Last through Rain, Snow, Mud and More
- Designed for Compatibility – Made to be Trimble to Fit your Vehicle’s Floor Contours with only a Pair of Scissors
- Please Check the Dimensions before Installation – Front (31.5″ L x 22.5″ W) Rear (58″ L x 18″ W)
- Eco-Tech Products – Made from Odorless EVA Rubber & Approved by SGS European Standard
Flexible and Tough – Flex Tough Tortoise series mats are designed to provide maximum protection. The uniquely constructed linear and diagonal ridges are placed strategically to maximize the dirt trapping capabilities of the mat. Made from only the highest quality polymers, Motor Trend Mats are Odorless and Non-Toxic. Trim able for Extra Customization. Deep Inverted Shell Design. No slip nibbed backing
3. Bosch 7443LL 7443 Light Bulb 2 Pack
Bosch Long Life miniature bulbs last up to 2X longer than the conventional standard miniature bulbs. This means longer replacement intervals and less maintenance. Bosch Bulbs use a proprietary mixture of tungsten and gases, which are two key components of a light bulb for energy efficiency and longer life. Bosch Bulbs are 100% tested, ensuring they meet SAE standards.
4. Dorman 923-009 Tail Lamp Circuit Board
- Seamless replacement – this tail light circuit board directly replaces the circuit board that comes stock on specified vehicles’ tail lights
- Easy installation – simply detach the failed circuit board and plug in this one
- Required repair – tail light won’t function without replacing a melted circuit board
- Excellent value – part matches performance of the original equipment
- Ensure fit – to make sure this part fits your exact vehicle, input your make, model and trim level into the Amazon Garage
Tail light not working because the circuit board burnt out? This tail light circuit board seamlessly replaces the failure-prone circuit board that comes stock on certain vehicle years, makes and models, restoring light function.
5. Nilight 2PCS 18W 1260lm Spot Driving Fog Light Off Road Led Lights Bar Mounting Bracket for SUV Boat 4" Jeep Lamp,2 years Warranty
- SUPER BRIGHT SPOT BEAM: High-quality LED chips emits bright white light
- Concentrated spot beam illuminates to further distance and lumen is 1260LM
- ADJUSTABLE MOUNTING BRACKET: The pod can be adjusted to about 45 degrees, which makes changing direction of light beam easier.
- BETTER HEAT DISSIPATION: Special designed die-cast aluminum alloy cooling fins effectively extend the lifespan to over 30,000 hours.
- WATERPROOF RATE: IP67
- waterproof up to 3.3 feet of water for 30 minutes and effectively dustproof.
- PACKAGE INCLUD: 2PCS 18W LED Light Bars and Mounting Brackets
- this product is the universal fit. It fit all the vehicles.
LED Power: 18W (6 x 3W High Intensity LED)
Beam Pattern: Spot Beam; Lumen: 1260LM
Input Voltage: 9-30V DC (fits 12V, 24V vehicles)
Working Lifespan: Over 30,000 hours
Working Temperature: -40~85 degrees Celsius
LED Color Temperature: Pure White 6000K-6500K
Material: 6063 Aluminum Profile, High quality Led Chips, PC Lens
Waterproof Rate: IP67; Waterproof, dustproof, quakeproof and anti-corrosive.
Certifications: CE, FCC and RoHS
Off Road Lighting: Back Up Light, ATV, SUV, Truck, Trailer, Forklift, Trains, Boat, Outdoor lighting, etc.
Other Lighting: Excavator, Dozer, Road Roller, Crane, Mining, Tractor, Harvester, Grain Drill, Fire engine, Rescue Vehicle, etc.
Household Lighting: Garden, Backyard, Garage, Indoor Lighting. (Note: Use a voltage transformer/converter to convert the AC 110-120V to DC 12V.)
They are aftermarket parts. NOT D.O.T. approved. Do not use if D.O.T. is required. For off road use only.
Before installing this product, please check your state/provincial and local/municipal laws and regulations.
6. iBrightstar Newest 9-30V Flashing Strobe Blinking Brake Lights 7440 7443 T20 LED Bulbs with Projector replacement for Tail Brake Stop Lights, Brilliant Red
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high Brightness chips per bulb,Working Voltage:9v-30v
- Fits:7440A 7440NA 7440 7440SV 7443NA 7441 7443 7443R 7444 992 WY21W W21/5W W21W etc. Easy installation, plug and play.
- Application: Flashing Strobe Blinking brake LED light bulbs will fast flashes 3 times at the beginning braking mode for much easier notified and safer stop & then turn stable solid brake light (Legal blinking times) to avoid any automotive cars, trucks, SUVs, RVs rear-end collision.
- Advantage:Non-polarity design, 300% brighter than original halogen bulb,full Aluminum Housing with Projection lens for Maximum Light output, aircraft grade aluminum heat sink with Low temperature,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
This bulb will strobe flash at the beginning of braking model and then keep solid light, which is legal blinking for braking stop safety alert, much easier noticed while braking and much safer for braking.
High Brightness LED: 54SMD 3014 chipset & 3SMD 3030 chipset.
Working Voltage: 9-30V (fit 12V, 24V vehicles).
Output Wattage: 3W/bulb (Low Power Consumption).
Color: Brilliant Red.
Service Life: Up to 30,000 Hours.
Note: Since LED bulbs have lower wattage comparing with the stock bulbs and may resulting in hyper flashing or system error, load resistor or flash relay might be needed to solve the problem.
IMPORTANT NOTICE! Please confirm the bulb base before placing an order.
iBrightstar is a registered brand with Amazon. Please contact us if there is any questions or other request!
7. iJDMTOY (2) 3156 3157 Pre-Wired Harness Sockets For Repair, Replacement, Install LED Bulbs For Turn Signal Lights, DRL Lamps or Brake/Tail Lights
- 2 pieces of 3156 3157 pre-wired heavy duty wiring harness with sockets
- Compatible Bulbs: 3157 3057 3155 3357 3457 3757 4057 4114 4157 3156 3056 3456 4156
- Easy plug and play installation with a pre-wired socket (Replace GM 15306147, ACDelco LS92, Dorman 645-626)
- Heavy duty with high efficiency and resistant to heat
- This is a universal fit product so under certain circumstances, you might still have to modified the socket or adapter slightly to get it fit. Because of this, we highly recommend you to double check the photos in this product listing to make sure the adapter is that same as your stock one to ensure an exact direct fit replacement.
8. Alla Lighting 7440 7443 LED Brake Stop Tail Lights Bulbs Super Bright T20 39-SMD High Power 2835 Chipsets W21W Red Turn Signal Light Replacement for Cars Trucks
- (Set of 2) Chips: 39 pieces high quality,high power with high illumination led chips per 7440 7443 red led bulb —360 degree full angle illumination with projector lens design
- Color: Brilliant pure red
- Working Voltage: 12V~18V with built in IC driver for better working performance
- Fitment: replace the bulb harness of 992,7440, 7440LL, 7440ST, 7441, 7443, 7443LL, 7443ST, 7444, 7444LL, W21W, W21/5W, 7443-SCK, 7443-SRCK, etc
- Application: Used for upgrading the incandescent T20 wedge W21W 7440 7443 brake light lamp, this bulb is compatible both Standard and CK/SRCK Type,safe and easy installation.
- Warranty: Fully ONE YEAR guaranteed for the manufacturer defect.please check the owner manual or Amazon fitment note for brake stop light or tail light application before purchasing.NOT canbus free, extra load resistors maybe required to avoid the error code or signal hyper flash.
9. Tail Light for Harley [Eagle Claw Design] DOT Approved Brake Running Lights Motorcycle LED Taillight Compatible with Harley Sportster Dyna Softail Touring Road Glide Road King (1 PCS, Black)
- 【EAGLE CLAW DESIGN】New and cool Harley led tail light lay down style. Black with red lens, clear protective cover. The back shell of motorcycle led tail light comes with a rubber ring.
- 【LIGHTING MODE & SPECIFICATIONS】Red(running), Bright red(brake), White(license plate), The Harley tail light comes with Osram led chips, voltage – DC 12V and over 50,000 hours lifespan.
- 【EASY INSTALLATION】It’s easy to install the Harley led tail light. Wire connection: black-ground, blue-running light, red/yellow-brake light, Insert the lines into the corresponding hole base on the wire diagram, just plug and play.
- 【REFUND IF NOT APPLICABLE】Fitment: [Harley Sportster] XL1200C Custom(1999-2006), Custom (EFI) (2007-2010), XL 1200S sport(2000-2003), XL883 (2004-2006), XL883C Custom(2000-2006), XL883L Superlow(2011-2015), XL883R (2002-2006)
- [Harley Dyna] Low Rider FXDL(1999-2005), Street Bob FXDB(2007-2008), Super Glide FXD(1999-2005,2007-2010)
- [Harley Switchback FLD] (2012-2016)
- [Harley Electra Glide Classic FLHTC](2007-2013)
- [Harley Softail Fat Boy FLSTF] (2007-2016)
- [Harley Touring Road Glide] FLT
- 【PACKAGE INCLUDED】1 Pcs Harley tail light + 1 Pcs electrical connector. One year warranty. SHOP WITH CONFIDENCE: (1) Not fit for your vehicle= Return it back to us
- (2) Cause fault code, flicker, moisture inside the light = Contact us for solution
- (3) Defective or light bulbs go out = Get new replacement
- (4) Any problem with AUDEXEN lights, just feel free to conatct us!
10. Dependable Direct Driver Side (LH) Tail Light Lamp for 2008-2012 Ford Escape FO2800210 8L8Z13405A
- SUPERIOR QUALITY – Dependable Direct replacement automotive taillight assemblies are an economical and quality alternative to high priced OE light assemblies. All Dependable Direct parts are manufactured using high quality materials and designed to meet OEM specifications
- VEHICLE COMPATIBILITY – It is very common to have multiple variations of replacement parts for each year, make, & model. Please check the Partslink and OE Reference numbers to make sure you are getting the correct replacement part for your vehicle. Also make sure the features are the same and that the part visually looks the same.
- CERTIFICATION – This light assembly is DOT/SAE Compliant and NSF certified
- REFERENCE NUMBERS – Replaces Partslink #: FO2800210 – Replaces OE #: 8L8Z13405A
- FITMENT – This lamp DOES NOT include the bulb and fits the Ford Escape (2008 2009 2010 2011 2012)
By our suggestions above, we hope that you can found Rear Deck Tail Light Genesis Coupe for you.Please don’t forget to share your experience by comment in this post. Thank you!