Top 10 Raspberry Pi Water Cooling Kit

Extreme Cooling Fan Kit For Raspberry Pi 3B+

Description
3510 Version Extreme Cooling Fan Kit For Raspberry Pi 3B+ is a brandnew Cooling system for your Raspberry Pi 3B+.
It’s a completely new radiator, and it’s a very cool cooling system after the armor shell.
The fan is 3510 version and more powerful but still quite when it is running.
Two aluminum blocks will touch the MCU tightly and good for the heat dissipation.
It’s with good-looking appearance, and easy to assemble.

Package Includes
1x Cooling Kit( Aluminum Heatsink with Cooling Fan)
1x Thin Copper Heatsink
2x Thermal Tapes

Package Includes:

20 pieces – 9mm x 9mm x 5mm aluminum heat sinks

10 pieces – 14mm x 14mm x 5mm aluminum heat sink

10 pieces – 14mm x 9mm x 5mm aluminum heat sink

Description:
The cooling fan has the features of high speed and low noise.
It can be close to the heating chip for better heat dissipation.
It’s ideal for Raspberry Pi 4 Model B And Raspberry Pi 3 Model B+(Plus)

Features
Thermal Tape will stick the cooling fan with Raspberry Pi stably.
Parameter: 7500rpm/min
Used for Raspberry Pi 3B+ & Raspberry Pi 4B

Package Includes
1x Dual Fan
2 x Heatsinks for Raspberry Pi 4 Model B
1 x Thin Thermal Tape For Raspberry Pi 3B+
1x Thick Thermal Tape For Raspberry Pi 3B+
1x Copper Heatsink For Raspberry Pi 3B+
1x Aluminum Heatsink for Raspberry Pi 3B+
1x User Manual

Includes 1 piece raspberry pi quite 30mm 3.3-5V DC fan and 2 pieces aluminum+ 1 piece copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3 and 3 B+ boards. These pure aluminum (2 pcs) and copper (1 pc) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 1pc 30x30x7mm quite 5v DC fan + 1 pc aluminum large heat sink: 0.56 x 0.56 x 0.31 inch (14mm x 14mm x 8mm) (L*W*H); 1 pc aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 1 pc copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)

★WELCOME TO THE ANGEL MALL★

12 Pieces cooling aluminium heat sink for Raspberry Pi models A, B, B+, 2, and 3 boards.

★FEATURES

✔ Compatible with Raspberry Pi models A, B, B+, 2, and 3 boards. 

✔ Double-sided thermal transfer tape offers high thermal conductivity and long lasting adhesion in all mounting scenarios.

✔ These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases.

✔ These heat sinks can also be applied in other devices such as the BeagleBone to cool processor, regulators, etc. 

★Package Contents

➤ 4 * 0.56 inch x 0.56 inch x 0.27 inch (14 mm x 14 mm x 7mm) aluminum heat sink

➤ 4 * 0.35 inch x 0.35 inch x 0.19 inch (8.8 mm x 8.8 mm x 5 mm) aluminum heat sink

➤ 4 * 0.59 inch x 0.59 inch x 0.02 inch (15 mm x 15 mm x 0.5mm) copper heat sink

★Warm notice:

Raspberry pi model is not included.

★ We are very confident that you will love our Products

(1) Strict Quality Control (100% Tested): In order to provide buyers with a pleasant shopping experience, each item has been carefully inspected and properly packed before sending out. 

(2) Fast and Professional Service: We have professional after-sale service team, any questions or problems from buyers will be answered within 24 hours (Including holidays). 

(3) 12 Months Warranty and 100% Money Back: We provide 12 months warranty service for all of the products we sell on Amazon, if you are not satisfied with our products, we can give you a 100% refund.

★We have professional R&D team, will continue to launch new products to meet customer needs and, thank you for your supporting!

Raspberry Pi Case with Fan, Raspberry Pi 3 B+ Aluminum Alloy Case with Heatsink and Screw Driver for RPi 3B+, RPi 3/2, RPi B

Features:
1. Can be fixed on objects such as walls and desktops
The aluminum alloy casing has two aluminum alloy gaskets, which can be screwed to the wall, table top and other objects.
2. Aluminum Alloy Material
High hardness, strong pressure resistance, metallic luster, not easy to rust, more conducive to heat dissipation. It can perfectly protect your mainboard.
3. Thermal Performance
The housing can be fitted with a cooling fan and the double-sided hollow design makes the heat dissipation more efficient.
4. Hole Position Corresponding
The hole design of the housing corresponds to the interface position of the Raspberry Pi motherboard. There are lamp position holes, TF holes, power interface, HD USB interface, audio device holes, and heat dissipation holes.
5. Package includes 1 * Aluminum Alloy Case, 1 * Cooling Fan, 3 * Heatsinks, 1 * Screwdriver and 1 * Screw Set.

Parameters:
Application: Raspberry Pi 2b/ 3B/ 3B+ Module
Material: Aluminum alloy
Color: Black
Size: 95*80*35mm

Package Including:
1 * Aluminum Alloy Case(Black)
1 * Cooling Fan
3 * Heatsinks
1 * Screwdriver
1 * Screw Set

The Raspberry Pi Dual Fan Was Included the Thermal Conductive Adhesive.

1.Connecter of the Raspberry Pi Dual Fan: PH2.0-2P
2.Cable Length of the Raspberry Pi Dual Fan:8cm
3.Use For Raspberry Pi 3 Model B+
4.DC:5V 0.2A
5.Not included Raspberry Pi 3 Model B+ Motherboard
Packing included:
1.Raspberry pi Dual Fan
2.Black Aluminum Heatsink.
3.Copper Heatsink

The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.

1.Fan Designed for Raspberry Pi 4B
2.Not included Raspberry Pi 4 Model B Motherboard
3.The Raspberry Pi 4B Single Cooling Fan Was Included the Thermal Conductive Adhesive.

Packing included:
1.Raspberry pi 4B Single Cooling Fan
2.Black Aluminum Heatsink Set for Raspberry Pi 4B

Includes 15 pieces anodized black aluminum+ 5 pieces copper cooling heat sink set for Raspberry Pi models A, B, B+, 2, 3 , 3 B+ and 4 boards. These pure aluminum (15 pcs) and copper (5 pcs) heatsink include heat conductive adhesive tape for optimum heat transfer. These heat sinks have profiles which are short enough to fit within standard Raspberry Pi cases. These heat sinks kit can be applied in other devices to cool processor, regulators, VRAM VGA RAM, IC Chips, MOSFET SCR, Southbridge, Northbridge etc. Package includes: 5 pcs aluminum large heat sink: 0.56 x 0.56 x 0.27 inch (14mm x 14mm x 7mm) (L*W*H); 5 pcs aluminum small heat sink: 0.35 x 0.35 x 0.19 inch (8.8mm x 8.8mm x 5mm) (L*W*H); 5 pcs aluminum heat sink 0.56 x 0.39 x 0.27 inch(14mm x 10mm x 7mm); 5 pcs copper large heat sink: 0.59 x 0.59 x 0.02 inch (15mm x 15mm x 0.5mm) (L*W*H)