Top 8 Prusa Heating Element E3d

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 24V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">

Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.

Package listing:
3 x 24V 50W Ceramic Cartridge Heater

The Prusa specific iteration of the V6 HotEnd – intended as a drop-in replacement for your original Prusa i3 MK3 or MK3S printer. Ships with the standard V6 components, plus a Prusa specific thermistor, heatbreak and 40W heater cartridge. The Prusa V6 HotEnd offers the same all-metal, high-performance reliability of the V6, whilst swapping out several of our standard components with Prusa specific parts. These include a 40W heater cartridge for increased power, a longer wired thermistor and a heatbreak with Prusa specific internal geometries – designed to improve retractions with the Multi-Material upgrade. This is a 24V HotEnd and is intended for function with a Prusa MK3 or MK3S. Do not use this HotEnd with 12V Prusas such as the MK2 or MK2S as this may damage your printer. Please note – this HotEnd does not come with the specific PTFE used by Prusa, please retain the PTFE from your existing HotEnd. For reference, PTFE should look like this on the MK3S/MK2.5S and this on a MK3/MK2.5 MMU2.

12V 40W 1/4-in (6.35mm) Ceramic Cartridge Heater
Fits Many MonoPrice/Flashforge/Wanahoo MK10 3D Printers with a 1/4in 6.35mm Bore Heater Hole

Please NOTE: This is a variation listing – You must select your voltage (12v or 24v) from the drop down menu at the top of the page

Specifications:
Product: Single-head heating tube
Diameter: 1/4 inch / 6.35mm
Length: 20mm
Wire Length: 3ft 3in / 1m
Voltage: 12 Volt
Power: 40 Watt

Package Contents:
1pc – 40W 12V Ceramic Heater Cartridge with a 1/4-in (6.35mm) Diameter

※Specification:
Name: 3D printer Cartridge Heater
Length: 1M 3.3FT
Voltage: 24V
Power: 40W
Weight: 125g [5pcs]
Safe working temperature: <300 °="" c="">

※Application
1 Semiconductor chamber heating
2 Semiconductor wafer lead connection
3 Semiconductor wire and die bonding
4 Freeze protection and deicing of equipment in cold climates or applications
5 Humidity Control
6 Patient Comfort heating used in medical devices
7 Mold die and platen heating
8 Seal bars used in packaging equipment
9 Test sample heating in gas chromatography

※Usage Notice:
1. The effective heating part of the Cartridge Heater must be kept dry “
2. The electrical connector of SIMAX 3D Heater Cartridge should be placed outside the insulation layer and heating chamber.
The working voltage should not exceed 10% of its rated value. The shell should be effectively grounded.”
3. Working environment of electric heating element, the temperature is not more than 95%, it has no explosive and corrosive gas
4. The electric heating elements should be stored in a dry place and avoid to be damp.

※Packing List:
5 x Cartridge Heater

After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you

Specification
Voltage: 12V
Power: 50W
Heating head size: 6 x 20mm
Heating head material: 304 stainless steel
Line length: 39inch /1M
Line thick: 0.5 mm?2; (The cross section of the copper wire inside the heater is 0.5mm?2;)
Color: as shown in the picture
Working Temperature: < 350="">

Single-end heating tube use instructions:
1.The effective heating part of the single-end heating tube must be kept dry.
2.The electrical joint of the single-ended heating pipe should be placed outside the insulation layer and the heating chamber. The working voltage should not exceed 10% of its rated value, and the casing should be effectively grounded.
3.The working environment of the electric heating element, the temperature is not more than 95 degrees, no explosive, corrosive gas.
4.The electric heating element should be stored in a dry place and should not be damp.

Package listing:
3 x 12V 50W Ceramic Cartridge Heater

The Prusa specific iteration of the V6 HotEnd – intended as a drop-in replacement for your original Prusa i3 MK3 or MK3S printer. Ships with the standard V6 components, plus a Prusa specific thermistor, heatbreak, 40W heater cartridge and Molex connector. The Prusa V6 HotEnd offers the same all-metal, high-performance reliability of the V6, whilst swapping out several of our standard components with Prusa specific parts. These include a 40W heater cartridge for increased power, a longer wired thermistor and a heatbreak with Prusa specific internal geometries – designed to improve retractions with the Multi-Material upgrade. This is a 24V HotEnd and is intended for function with a Prusa MK3 or MK3S. Do not use this HotEnd with 12V Prusas such as the MK2 or MK2S as this may damage your printer. PTFE tube and trimming instructions are now included.

Parts included:
1 x Aluminum heatsink
1 x Stainless steel heatbreak (Prusa specific)
1 x Brass nozzle (0.4mm)
1 x 24V 40W Heater cartridge (Prusa specific)
1 x Aluminium heater block
1 x Thermistor (Prusa specific)
1 x Bowden collet (metal)
1 x Bowden clip
1 x Fixings kit
1 x M3 Grub screw
1 x M3 washer
1 x Thermal paste
1 x Molex Connector (Prusa specific)
1 x PTFE Tube