Top 10 Printhead Cleaner Hp Officejet Pro

HP Bright Office Inks are designed to support the review and collaboration process in the office, rendering outstanding line quality together with bright, finely distinguishable colors to bring out every detail on plain paper. Don’t take risks with third party compatible DesignJet ink cartridges such as remanufactured ink (reman ink), remanufactured cartridges (reman cartridges), third-party replacement ink cartridges, ink refills, cartridge refills, continuous ink systems (CIS or CISS), or other cheap alternative ink cartridge solutions. Buy genuine HP DesignJet Ink for professional quality prints.

Magic Bullet is specifically designed to quickly clean blocked printer heads and get them fully functional again. Developed by professional chemists and tried and tested by printer technicians, Magic Bullet is incredibly effective and fast acting. If you are experiencing banding, colour casts or poor print quality, then your printer heads are blocked!! Magic Bullet quickly breaks down the dried ink and clears the blockage. (Easy to use and comes complete with instructions). This product does not contain alcohol or other chemicals that can damage your printer. The special formulation breaks dried ink down quickly and flushes the printer heads – restoring your printer back to life. Used by printer technicians, this is a professional product that restores Epson desktop printers where blocked heads are causing a printing issue. This kit is designed for Epson printers that have the ink cartridge located directly on the print head (the ink cartridge should move with the print head on your printer).

What is included in the kit?
– 2x 2oz bottles of fast acting Magic Bullet solution
– A pair of gloves (latex free)
– Step by step instructions
– 2 10ml syringes specially adapted for Epson printers
– Access to our training video (upon purchase)

Will this work for my Epson printer?
Compatible with most Epson inkjet desktop printers.

This kit will NOT work with the following Epson Printers
– Epson PX 7XX and 8xx models
– Epson printers that have the ink fed to the printhead by tubes
– Wide/Large format printers
– Epson Artisan 7xx and 8xx models
– Epson Stylus SX515W

Package Include:
1 × 3.4 oz Print head Cleaning Fluid
1 × Syringe(10 ML)
1 × Silicone Tube
1 × Instruction Manual
2 × Gloves

Compatible
Print Head Cleaner for HP 8600 8610 6600 8620 6968 6978 7520 8600 Plus 6520 5520 6830 5529 6970 6525 8500 5510 5519 4650 1700 3520 3521 3522 4610 4620 4622 5180 5200 5514 5968 6100 6510 6512 6515 6700 6869 6950 6954 6958 6960 6961 6962 7100 7110 7510 7512 7515 7525 7610 7612 7730 7850 8100 8210 8216 8218 8515 8530 8630 8635 8640 8650 8660 8680 8700 8710 8715 8720 8730 8745 d7360 d7560 c6180 c6380 c309A c310A c410A b8550 l7780 euketon Printers.
Canon Pro 100 Pro 10 Pro 9000 MX922 MX920 MX892 MX73 TS9020 MP640 MP560 MG7120 MG7520 MG5420 6520 MG6320 MG6220 MG5320 MG6630 MG6620 ipf670 ip4300 5720 Printers.
Brother mfc-j4510dw mfc-j835dw mfc-j251dw mfc-j276dw mfc-j5910 mfc-j6920dw mfc-j430w mfc-465cn lc201 lc103 6935 Printers.
Dell V525W Printers.
Kodakkodak 750 Printers.

Tips and Suggestions
Before start to clean, please refer to the blow 3 tips then decide if our printhead solution is suitable for your printer. Most of customers can clean their printhead successfully under our guidance.
1.This printer ink head cleaner kit couldn’t solve all blockages. Such as:
(1)The printhead cleaner doesn’t work for badly clogged head and insoluble substances inside the nozzle.
(2)It doesn’t work for very old aged printhead since it may cause more clogging after cleaning.
2.Since you are not professional, there is a risk of damaging the printer when repairing it by yourself. If there is leakage or improper operation when injecting the fluid cleaner to the printhead, it will burn the circuit, even damage the printer completely.
3.After finish cleaning with this fluid, you need to run the“Nozzle Cleaning” program, it will need a lot of ink. If there is only a little ink left, please refill or change to a new cartridg

Safety notes
Keep out of the reach of children
Eye protection is recommended during use

Cleans blocked inkjet printers quickly and easily. Instruction videos for Epson, HP, Brother, Canon and Lexmark Printers can be found on our website

Compatibility notes
Compatible with water-based dye and sublimation inks
Can be used with pigment inks if the blockage is less than 2 months old
Printer must be clear of all error messages before use, including ‘clean printer head’
We recommend using fresh ink from a different supplier after cleaning. If your ink caused the blockage it can reclog the head during priming

Disclaimer
Printer cleaning is successful 90% of the time, but does require a supply of fresh ink and carries a small risk of damage to the printer. As such, we recommend using cleaning when other methods (such as the inbuilt cleaning function) have already been tried, and when the printer has no functional use unless fixed. If in any doubt, please contact us

Compatibility Notes
Our printhead cleaning fluid is compatible with all desktop printers including Epson, HP, Canon, Brother and Lexmark desktop printers

Disclaimer
Our cleaning solution may not work for complete clogged nozzles or when long period inactive printheads. The badly clogged printhead may need to be placed.

Each Kit Contains
☛One 100ml printhead cleaning solution
☛One 10ml syringe and 2 connector tubings
☛One pair of reusable PVC sanitary gloves

Instructions
1. Print a nozzle check pattern to identify the clogged colors.
2. Press the “replace cartridge” button.Remove ink cartridges.
If your printer’s printhead is attached the ink cartridge (Most of the HP printers), then please follow the below procedures:
3. Fill a flat tray with less than 3mm high of cleaning fluid.
4. Place the ink cartridges to the flat tray for 20-40 minutes depending on how bad the clog is.
5. Press the ink cartridges to a thick napkin to dry out the cleaning solution.
6. Check if the nozzle clog is cleared. If not, repeat the same process for another 20-40 minutes.
7. If your printer’s printhead is separated from ink cartridge(Most of Epson printers), then please follow the below procedures:
1. Inject the cleaning fluid to the clogged nozzles using the syringe and tubing. (please make sure that the tubing size fits well with the nozzles before injecting to avoid leak of solution).
2. Have the cleaning fluid to sit in for 20-40 minutes depending on how bad the clog is.
3. Re-install the ink cartridges and print a nozzle check.
4. If it’s still clogged, then we suggest you to take out the printhead and soak.

Attention
If you remove the printhead soak and cleaning , the cleaning liquid level is not higher than 3mm when soaking. Printhead circuit must not be in touch with cleaning liquid. If the printhead circuit is wet, please have the circuit complete dry.

For use on: BROTHER, CANON, DELL, EPSON, HP, KODAK, LEXMARK, PITNEY BOWES, AND SHARP PRINTHEADS WORKS WITH ALL CISS SYSTEM PRINTERS AND ATTACHMENTS AS WELL!!! Safely and effectively removes clogs and debris from print heads! Have your prints been streaking? Are you seeing banding in your prints? If your prints are not as crisp as they should be… your print head may be clogged. This can happen for several reasons: If you haven’t used your printer in a while or if you go awhile between printing, your print heads could have dried ink, dust or debris clogging them. If you refill your cartridges, sometimes the ink in your print head can dry up during the process causing less than perfect prints. Occasionally, your print heads will dry up for environmental reasons, such as a dry environment. Especially during the winter months when your home or office is being heated. If you alternate cartridges, such as replacing your black with a photo cartridge. The cartridge not in use will be prone to drying due to contact with the air. Sometimes, print heads just dry up… for unknown reasons. This kit works on: ARCHIVAL, CLARIA, DURABRITE, DYE-SUB, PHOTO and ALL COLOR inks!!! Just a few drops dissolves dried ink in just minutes! (Deep clogs or “sludge” may take up to an hour to clear) It also clears the cartridge print head of other debris and dust causing poor quality printing. It’s safe and simple to use! Couldn’t get an easier and effective solution! So safe to use, it may be used for maintenance. No need to wait for a clog to ruin your print job, practice prevention! If you refill your own cartridges, make this part of the process to ensure clear flowing jets . Just calculate the savings. Imagine the possibilities! Our most precious resource! Included in the Print Head Cleaning Kit are: *1 oz (30ML) of specially formulated printhead cleaner! *1 10ml syr

For use on:  EPSON BROTHER CANON HP PRINTHEADS WORKS WITH ALL CISS SYSTEM PRINTERS AND ATTACHMENTS AS WELL!!!

Safely and effectively removes clogs and debris from print heads!

Have your prints been streaking?

Are you seeing banding in your prints?

If your prints are not as crisp as they should be… your print head may be clogged. This can happen for several reasons: If you haven’t used your printer in a while or if you go awhile between printing, your print heads could have dried ink, dust or debris clogging them. If you refill your cartridges, sometimes the ink in your print head can dry up during the process causing less than perfect prints. Occasionally, your print heads will dry up for environmental reasons, such as a dry environment. Especially during the winter months when your home or office is being heated. If you alternate cartridges, such as replacing your black with a photo cartridge. The cartridge not in use will be prone to drying due to contact with the air. Sometimes, print heads just dry up… for unknown reasons. This kit works on: ARCHIVAL, CLARIA, DURABRITE, DYE-SUB, PHOTO and ALL COLOR inks!!! Just a few drops dissolves dried ink in just minutes! (Deep clogs or “sludge” may take up to an hour to clear) It also clears the cartridge print head of other debris and dust causing poor quality printing.

It’s safe and simple to use!

Couldn’t get an easier and effective solution!

So safe to use, it may be used for maintenance.

No need to wait for a clog to ruin your print job, practice prevention!

If you refill your own cartridges, make this part of the process to ensure clear flowing jets .

Just calculate the savings. Imagine the possibilities!

Our most precious resource!

Included in the Print Head Cleaning Kit are: *17 oz (500ML) of specially formulated printhead cleaner! *1 syringe and blunt needle.