Finding your suitable readers for peltier element cooling is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for peltier element cooling including detail information and customer reviews. Let’s find out which is your favorite one.
587 reviews analysed
1. ESUMIC DC 12V DIY Thermoelectric Peltier Refrigeration Cooling System Kit Semiconductor Cooler Conduction Module + Radiator + Fan + TEC1-12706
Feature
- 1. Material: Adopt TEC1-12706 semiconductor chilling plate, good quality for use.
- 2. Structure: Complete sealed structure, isolating the moisture in the air.
- 3. Application: Include TEC1-12706 semiconductor cooler and other accessories, easy to install. Compact size can be installed anywhere, easy installation. Suitable for small space cooling,semiconductor refrigeration learning theory, research solutions developed cooling equipment planning.
- 4. Performance: High cooling efficiency, easily cooling down within a few minutes. Mini air conditioner for pet or little fridge.
- 5. Effect: Great DIY kit for electronic enthusiasts in semiconductor cooling applications.
Description
Great idea for pet cooling in hot summer, such as chicken, little dog. Can used for plate cooling, pet bed cooling, test bench, small space cooling.
Specification:
-Material: Aluminum
-Power Supply: DC 12V
-Power Cnsumption: 72W
-Size: Approx. 120 * 100 * 80mm / 4.7 * 3.9 * 3.1inch
Package Included:
1 x Cooling System Kit
2. BQLZR Huge TEC1-12730 253W Thermoelectric Peltier Cooler Cooling 62mm x 62mm x 4.8mm
Feature
- Operates in 12 volts DC and >
- 30 amps to make it works fluently.
- Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
- This device must be used in conjunction with a heat sink to avoid burned. Can’t exceed 50 degrees
- Solid state, vibration free, noise-free.
- Output cooling power: 253W
Description
100% Brand new , never used
Item’s color might be different from the picture because of the aberration.
Feature:
Solid state, vibration free, noise-free.
Simple to install and operate.
Each device is fully inspected and tested.
Fitted with 2.85 inch insulated leads .
Perimeter sealer for moisture protection.
This device must be used in conjunction with a heat sink to avoid burned.
Get cooling in minutes by simply reversing the polarity, used for numerous applications such as cooling your CPU, video card, NANO Reef, laser diode, CCD camera, picnic cooler, beverage cooler , alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consit primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
MODEL: TEC1-12730(TE is the abbreviation of Thermo-Electric)
Maxiumu power consumption :456 Watts
Output cooling power: 253W
Operates in 12 volts DC and >30 amps
Maximum temperature difference: △Tmax (Qc=0) Above 65°C.
Operating current: Connect with sufficient power supply at 12V 30A
Size: 62mm x 62mm x 4.8mm
Weight:62g
Note: Make sure the cooler with enough cooling, the temperature of the heat surface can not exceed 50 degrees.
Package include:
1 x TEC1-12730 Thermoelectric Peltier Cooler
3. Thermoelectric Power Generator Peltier, High Temperature Heat Sink Cooling Generation Element Peltier Module TEG 1/3/5/10PCS 150℃ SP1848-27145
Feature
- [Superior Quality]: This thermoelectric power module is made of high quality material, durable, no pollution, harmless to you body
- [High Reliability]: Each device of this thermoelectric peltier is full inspected and tested and fitted with 6-inch insulated leads, high temperature 150℃, with NM static protection
- [Easy Installation]: Simplify installation steps, no modification, cutting, or drilling required
- Red wire to positive, black wire to the negative, it generate electricity when the temperature difference happened
- [Thermoelectric Peltier Module]: 40 x 40mm Thermoelectric Power Generator Peltier Module TEG High Temperature 150 degree
- [Portable]: Small size, light weight, no moving parts, easy to move and carry, long life, designed specifically for power generation
Description
Features:
1.Made of high quality material, durable, no pollution
2.High temperature 150℃, with NM static protection, of high reliability 3.Easy to install, red wire to positive, black wire to the negative
4.40 x 40mm thermoelectric power generator peltier module 5.Light weight, long life, designed specifically for power generation
Specifications:
Model: SP1848-27145
Color : White Lead Length: about 300mm/11.81”
Size: 40mm x 40mm x 3.4mm/1.57” x 1.57” x 0.13” 20 Degree Temperature Difference: Open-circuit Voltage 0.97V,Generated Current: 225MA
40 Degree Temperature Difference: Open Circuit Voltage 1.8V,Generated Current: 368MA 60 Degree Temperature Difference: Open Circuit Voltage 2.4V,Generated Current: 469MA
80 Degree Temperature Difference: Open Circuit Voltage 3.6V,Generated Current: 558MA 100 Degree Temperature Difference: Open Circuit Voltage 4.8V,Generated Current: 669MA
Note :
The above values are for reference only, the wiring in actual use, and the step-up board, there will be loss of current
Package Include :
1x Thermoelectric Power Module
4. ESUMIC 5PCS TEC1-12705 Heatsink Thermoelectric Cooler Cooling Peltier Plate Module 12V 45W
Feature
- 1. Shape: Solid state, vibration free, noise-free.
- 2. Effect: Perfect for cooling down semiconductor devices.
- 3. Application:Used for many situations from CPU coolers to alternate power sources.
- 4. Performance:Reverse the polarity to get device cold in minutes or heat.
- 5. Superiority:Easy to install and operate.
Description
Used for many applications from CPU coolers to alternate power sources. Great for your own custom car drink warmer/cooler as well.
Features:
– It heats one side while simultaneously cooling on the other.
– You can use multiple ones in series or parallel.
– You may glue (use thermal glue) it right on to the chip or whatever you want.
– You can reverse the polarity and thus switch which side gets cold and which gets hot.
Specification:
– Model: TEC1-1275
– Size: Approx. 40mm x 40mm x 4mm
– Voltage: DC 12V
– Max Power: 45W
– Imax (A): 5A
– Power Cord : 300mm
– Red wire to the positive, black wire to the negative
How to Use:
– Prepare five things, Thermoelectric Cooler + heatsink + Grease + potholder + power.
– Coated with silicone grease on both sides of the thermoelectric cooler.
– Place the thermoelectric cooler on a heat sink with a potholder in the middle.
– Tighten the screws. Powered, and it starts cooling.
Please Note:
– When installing, please pay attention to clean and flat surfaces
– Use only with the use of thermal grease
– Only in combination with a sufficiently dimensioned heat sink
Packing Contain:
5PCS x TEC1-12705 Thermoelectric Cooler
5. Northbear Thermoelectric Cooler Peltier Refrigeration Cooling TEC System Kits Double Fan DIY +Power Supply
Feature
- Semiconductor coolers are a form of solid state cooling that incorporates both.
- The kit you can made cooling system for yourself.
- semiconductor Technologies and electronic assembly techniques.
- this cooling system suit for Small 10-30 liter space.
- Pakcage includes switch power supply(12V 12A)
Description
Rated Power: 144W
Voltage: 12V
Current: 12A
weigth:900g
cooling chip: TEC1-12706(6A 12V 72W)
this cooling system suit for Small 10-30 liter space.
Pakcage includes switch power supply(12V 12A)
Package includes:
1pcs x Thermoelectric Peltier Cooler
1pcs Power supply
6. Laqiya 5PCS TEC1-12706 12V 60W Heatsink Thermoelectric Cooler Cooling Peltier Plate Module
Description
100% Brand new and high quality
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous
applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
Model: TEC1-12706
Size: Approx. 40mm x 40mm x 3.8mm
Voltage: 12V
Cooling power: Qcmax 60W
Tmax(Qc=0): up to 65°C
Operates Temperature: -30°C to 83°C
Power Cord: Approx. 25-30CM
These devices must be used in conjunction with a heat sink to avoid burned
Each device is full inspected and tested
Fitted with 6-inch insulated leads
Package Included:
5 x TEC1-12706 Thermoelectric Cooler
7. GeeBat 10PCS TEC1-12706 Thermoelectric Cooler Heat Sink Heatsink Cooling Peltier 12V 5.8A
Description
Feature:
100% Brand new and high quality.
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts.
These devices must be used in conjunction with a heat sink to avoid burned.
Each device is full inspected and tested.
Fitted with 6-inch insulated leads.
Specifications:
Model: TEC1-12706
Size: Approx. 40mm x 40mm x 3.8mm
Voltage: 12V
Umax (V): 15V
Cooling power: Qcmax 58-65W
Imax (A): 5.8A
△Tmax(Qc=0): up to 65°C
Operates Temperature: -30°C to 83°C
Power Cord: 25-30cm
Package Included:
10* TEC1-12706 Thermoelectric Cooler
8. 10Pcs TEC1-12706 Thermoelectric Cooler Heat Sink Cooling Peltier Plate Module 12V 5.8A
Description
Description:
Get ice cold in minutes or heat to boiling by simply reversing the polarity, used for numerous applications from CPU coolers to alternate power sources, or even for your own custom car drink warmer/cooler.
Since they consist primarily of semiconductor material sandwiched between ceramic plates and have no moving parts
Model: TEC1-12706
Size: Approx. 40mm x 40mm x 3.8mm
Voltage: 12V
Umax (V): 15V
Cooling power: Qcmax 58-65W
Imax (A): 5.8A
Tmax(Qc=0): up to 65°C
Operates Temperature: -30°C to 83°C
Power Cord: 25-30cm
These devices must be used in conjunction with a heat sink to avoid burned
Each device is full inspected and tested
Fitted with 6-inch insulated leads
Included:
10 x TEC1-12706 Thermoelectric Cooler
9. MTMTOOL 1.57" x 1.57" TEC1-12706 Heatsink Semiconductor Refrigeration Tablets 6A 12V Thermoelectric Cooler Cooling Plate Module
Feature
- TEC1-12706 Thermoelectric Cooler Cooling Plate Module.
- Qcmax:58-65W
- Tmax(Qc=0):up to 60°C.
- Total Size:40 x 40 x 3.8mm/1.6″ x 1.6″ x 0.15″(L*W*H).
- Semiconductor coolers are a form of solid state cooling that incorporates both semiconductor technologies and electronic assembly techniques.
- The cooling sheet is made up of a double-sided ceramic panel and a semiconductor material through a combination of low-melting solder.It is a fragile material.Users must take it lightly.
Description
Features:
Always apply thermal grease when installing the heat sink.
Enables reduced, low-noises operation of cooling fans, while providing greater cooling power.
Application range:portable cooler box for cars,food and beverage service refrigerator,liquid cooling,temperature stabilizer,CPU cooler and scientific instrument,photonic and medical systems,ect.
Specification:
Net Weight:25g
Color:White,Red,Black
Material:Ceramic
Model:TEC1-12706
Imax:6A;Rated Voltage:12V
Cooling power:Qcmax 58-65W
Tmax(Qc=0):up to 60°C
Operates Temperature:-55°C to 83°C
Power Cord(Approx.):Approx. 300mm±5mm/11.81″±0.2″
Size(Approx.):40mm x 40mm x 3.8mm/1.57″ x 1.57″ x 0.15″
Package Includes:
1 x Thermoelectric Cooler
Note:
Due to the manual measurement,there may be small deviations.
The color may have different as the difference display,please understand.
Conclusion
By our suggestions above, we hope that you can found Peltier Element Cooling for you.Please don’t forget to share your experience by comment in this post. Thank you!
