Finding your suitable readers for mercruiser 120 hp hoses is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for mercruiser 120 hp hoses including detail information and customer reviews. Let’s find out which is your favorite one.
847 reviews analysed
1. Quicksilver 96148Q8 Water Pump Repair Kit- Mercury and Mariner Outboards and MerCruiser Stern Drives
Feature
- Complete Replacement Water Pump Repair Kit
- Produced to meet Mercury Marine original equipment manufacturer specifications to best protect your Mercury or Mariner outboard or MerCruiser stern drive.
- Kit contains pump housing assembly, gaskets, o-ring, plates, impeller, key, face plates, water tube guide sleeve plus gear lube fill and vent screw o-rings.
- Designed for durability to provide higher flow rates and cooling flow to protect your engine
Description
This extensive kit fits Mercury and Mariner outboards from the 65 hp (4-cylinder) through V-6 outboards with short vane impellers. It also fits MerCruiser I, R, MR and Alpha One drives (serial number 2495186 through 0D469858). See your owner’s manual for replacement schedule. See your service manual for installation instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
2. Quicksilver Ignition Stator Assembly 832075A21 – for 30 HP – 125 HP Mercury and Mariner 2-Cycle Outboards
Feature
- Ignition stator assembly comes with the stator and lead wire harness.
- Same ignition stator assembly as originally installed on your outboard.
- Designed and built for outboard motor applications.
- See your owner’s manual or service manual for specific applications and replacement instructions.
- Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Description
Ignition stator assembly 832075A21 is for use on numerous 30 hp through 125 hp Mercury and Mariner 2-cycle outboards. See your owner’s manual or service manual for specific applications and replacement instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine original Equipment replacement engine parts, oils, and accessories, but also works to serve all original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
3. Quicksilver Water Pump Repair Kit 812966A12-4-Stroke Outboard – for Mercury and Mariner 4-Stroke Outboards, 30 HP – 60 HP
Feature
- Expansive kit to replace water impeller, upper and lower housings, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling.
- For select Mercury and Mariner 4-stroke EFI and carbureted outboards 30 hp through 60 hp.
- One of the most complete kits available to repair 4-stroke outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions.
- Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Description
Water pump repair kit 812966A12 is for Mercury and Mariner 4-stroke outboards 30 hp through 60 hp. The kit includes water impeller, upper and lower housings, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling. One of the most complete kits available to repair 4-stroke outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine original Equipment replacement engine parts, oils, and accessories, but also works to serve all original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
4. Mercury Fuel Pump MerCruiser Outboard 20 30 35 40 45 60 HP 4 Stroke 892267A51
5. Quicksilver Mercury Marine Mercruiser Water Pump Impeller Repair Kit for Outboard & Alpha One Sterndrive 46-96148A8
Feature
- Expansive kit to replace water impeller, upper and lower housings, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling.
- For select Mercury and Mariner outboards with short-vane impellers and select MerCruiser stern drives.
- One of the most complete kits available to repair outboard and stern drive water pumps. See your owner’s manual or service manual for specific applications and replacement instructions.
- Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Description
Water pump repair kit 96148A8 is for Mercury and Mariner 65 hp (4-cylinder) through V-6 outboards with short-vane impellers. It also fits MerCruiser I, R, MR and Alpha stern drives (serial number 2491586 through 0D469858). The kit includes water impeller, plastic pump housing, face plate, gaskets, drive key, face seal, seal carrier and water tube coupling. One of the most complete kits available to repair 4-stroke outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine original Equipment replacement engine parts, oils, and accessories, but also works to serve all original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
6. Quicksilver Water Pump Repair Kit 853792A07 – Outboards – for Mercury or Mariner 25 HP Through 30 HP 4-Stroke Outboards
Feature
- Expansive kit to replace water impeller, upper and lower housings, face plate, gaskets, seals and o-rings.
- For select 25 and 30 HP EFI FourStroke outboards
- One of the most complete kits available to repair 4-stroke outboard water pumps. See your owner’s manual or service manual for specific applications and replacement instructions.
- Produced by Mercury Marine to our stringent original equipment manufacturer specifications to maximize the performance of your Mercury and Mariner outboard or MerCruiser stern drive
Description
Water pump repair kit 853792A07 is for Mercury or Mariner 25 hp through 30 hp 4-stroke outboards. The kit includes water impeller, pump housing, face plate, gaskets, seals and o-rings. See your owner’s manual or service manual for specific applications and replacement instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years. Quicksilver is the premier supplier of Mercury Marine original Equipment replacement engine parts, oils, and accessories, but also works to serve all original Equipment brands in the marine and powersports industries. It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.
7. Sierra 18-70931 Molded Hose
Description
Sierra’s 18-70931 Molded Hose runs from the distribution block to the water pump. It is designed to fit MCM 120/2.5L, 140/3.0L and 160/165 applications. It is interchangeable with Mallory 9-44050 and Mercruiser Stern Drive 32-47640, 32-8M0071007, 32-96879. Each Sierra product meets or exceeds the original equipment part it replaces.
8. Sierra 18-70956 Molded Hose for Mercruiser 4.3L/LX, 230/5.0L, 260/5.7L
Feature
- Used for thermostat cover to exhaust elbow applications
- Designed for use in Mercruiser 4.3L, 4.3LX, 230 HP/5.0L, and 260 HP/5.7L inboard engines
- Interchangeable with Mallory 9-44084 and Mercruiser Stern Drive 32-16012
- Check manufacturer recommendations to ensure a proper fit before purchasing
- Each Sierra product meets or exceeds the original equipment part it replaces
Description
Sierra’s 18-70956 Molded Hose is used for thermostat cover to exhaust elbow applications. Designed for use in Mercruiser 4.3L, 4.3LX, 230 HP/5.0L, and 260 HP/5.7L inboard engines. It is interchangeable with Mallory 9-44084 and Mercruiser Stern Drive 32-16012. Check manufacturer recommendations to ensure a proper fit before purchasing. Each Sierra product meets or exceeds the original equipment part it replaces.
9. Molded Hose
Description
Sierra products are engineered to meet today’s high horsepower engine demands and stand up in the harsh marine environment. All Sierra products meet or exceed the original equipment part it replaces. Sierra supplies many OEM engine manufacturers and boat builders hundreds of quality parts every day
10. Sierra International 18-2116 Marine Power Trim Hose for Mercruiser Stern Drive
Description
OEM: MERCURY MARINE 32-99904
Conclusion
By our suggestions above, we hope that you can found Mercruiser 120 Hp Hoses for you.Please don’t forget to share your experience by comment in this post. Thank you!
