The Best Maytag Dishwasher Door Latch Wpw10130695

OEM Factory Part. 279570

1) Turn off power to your dishwasher in breaker box (ABSOLUTELY CRITICAL TO AVOID SHOCK) 2) Rotate lower access panel fasteners and remove them 3) Remove access panel/sound dampening pad. Determine if the water supply/power lines have enough slack to move the dishwasher. If not, you will need to turn off water supply valve, disconnect water supply line from inlet valve & release power line from junction box 4) Open dishwasher door, remove the screws from the existing brackets (if present) 5) You will next be moving the dishwasher. To do so, you may need to lower the dishwasher by adjusting the leveling legs 6) Carefully pull dishwasher a few inches away from the front of the cabinet 7) Use pliers to pull up tabs in back of the bracket (if present). Pull out old brackets 8) Insert new brackets. Use pliers to adjust the back tab to lock the brackets in place 9) Slide the dishwasher back into the cabinet (readjusting the leveling legs, if necessary). Replace the screws in your new brackets 10) Reverse steps 3, 2 and 1. ALL SET! This is a generic product manufactured and distributed by Impresa Products (TM). This is not a Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) or Inglis (TM) OEM product and Impresa Products has no affiliation with or endorsement from these brands. Our product is not covered under any other manufacturer’s warranty (except for Impresa Products). The Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names and logos are the registered trademarks of their owners. Any use of the Whirlpool (TM), Sears (TM), Kenmore (TM), Amana (TM), Jenn-Air (TM), Crosley (TM), Maytag (TM), Roper (TM), Magic Chef (TM), Estate (TM) and Inglis (TM) brand names, model or any other related designations are made solely for purposes of describing and illustrating compatibility.

Genuine Original Equipment Manufacturer (OEM) parts! Door latch and switch DD81-01629A is an original equipment manufacturer (OEM) part that fits some Samsung DW80-series dishwashers. Door latch and switch DD81-01629A holds the dishwasher door shut and includes the door switch. The door switch detects when the door is closed so the dishwasher can start. Unplug the dishwasher and remove the T20 Torx screws from the inner door panel, and then separate the inner and outer door panels to access the door switch. Model numbers this part fits: DW80F600UTB/AA-0000, DW80F600UTB/AA-0001, DW80F600UTS/AA-0000, DW80F600UTS/AA-0001, DW80F600UTW/AA-0000, DW80F600UTW/AA-0001, DW80F800UWS/AA-0000, DW80F800UWS/AA-0001, DW80J3020UB/AA-0000, DW80J3020US/AA-0000, DW80J3020UW/AA-0000, DW80K5050UB/AA-0000, DW80K5050US/AA-0000, DW80K5050UW/AA-0000, DW80K7050UG/AA-0000, DW80K7050US/AA-0000 For Samsung.

This is a lid lock strike. For the latch, you’ll need part number W10404050. These are sold separately. This is not a Whirlpool OEM product. The Whirlpool brand names and logos are the registered trademarks of their respective owners. Any use of the Whirlpool brand name or model designation for this product is made solely for purposes of demonstrating compatibility. “The trademarks, logos, and service marks (collectively the “Trademarks”) displayed herein Supplying Demand are registered and unregistered trademarks of Supplying Demand, its affiliates, and others. Nothing contained herein should be construed as granting, by implication, estoppel, or otherwise, any license or right to use any trademark displayed herein without the written permission of Supplying Demand or such third party that may own the trademark displayed herein. Your misuse of the trademarks displayed herein, or any other content on this website, except as provided herein, is strictly prohibited.”