The Best Lightweight Hurricane Panels

Specifications:

Solar panel:Polycrystalline 11V 30W
Battery:Lithium battery,7.4V 14AH
Light source:2x2W LED+2x3W LED

Package Includs:
1 solar systerm with panel
4pcs LEDs
3pcs 1m android phone charging cable+1 for Iphone 4 plug+1 for Iphone 6 plug
8pcs Tapping screw ∅4*40,plastic anchor 8pcs
16pcs stainless steel screw with plate 3M*15
16pcs Hexagon stainless steel nuts M3
4pcs H shape conjunction parts
4pcs support shelves
1pc Galvanized spanner

THE SOLAR PANEL
Chagre:The red indicator light will turn on when connect to solar panel where a input power from.
Load:The indicator light will turn on once any of the five outlets has been connect to load and there is a power output.

BATERY VOLTAGE:
(1)Yellow area: low level of power stored in battery,the protection of over discharge function initiates;
(2)Green area: medium level of power,this area shows the battery works in normal condition.
(3)10V: Full power, the protection of over charge function initiates.

POWER:the switch for the whole system
(1)Turn on this switch,all outlets are ready to export power.The battery voltage needle points to Green area and shows how much power is stored in the battery.
(2)Turn off this switch,all outlets stop to export power.The battery voltage needle points to zero.

IN CHARGE:connect to solar panel to charge the battery.The solar panel will charge the battery no matter the switch is being Turned ON or OFF.When the panel connected to IN CHARGE with switch Turned ON,the CHARGE indicator will be lit up and the BATTERY VOLTAGE shows how much power the battery stores.The system can be charged and export power at the same time

NOTE:Except solar panel,this system can be charged by AC or DC power.Recommend to use transformer:AC:100V—240V with a power output DC:9V 2A

QUALITY.

The washered wing nuts are made of zinc die cast, this will protect them from rust and corrosion and ensure the durability and longevity of the product.

PURPOSE.

The HighWind Solutions by Mountwell Hardware washered wing nut can be used in many applications.

It is great to use with hurricane panels and shutters that utilize the “F” track design and also with anchored bolts .

INSTALLATION.

Installation is simple. With the wide wings, you can simply install and tighten by hand.

To ensure the proper installation we recommend using the available wing nut driver.

This will not only make the job faster but will also ensure that the panels are on securely.

**Only tighten panels to the manufacturers specifications.**

THE MOUNTWELL HARDWARE GUARANTEE

We take pride in our product quality and craftsmanship and all of our products are backed by our 100% money back guarantee.

“solar power charger” High power generation efficiency and time saving Compared with the traditional conversion efficiency of 15%-17%, it is a highly efficient solar panel that can achieve 22%-25% power generation efficiency. Save money with solar energy You can put it in a sunny place to charge your smartphone or other USB device. Since it will be charged by the sun, there will be no electricity charges. Lightweight body saves power The product is about 100g lighter than the traditional 22W solar charger and is easy to carry. “An important emergency tool” 1. Everyday use: camping, climbing, hiking, and when using this solar panel, you don’t have to worry about running out of power. 2. Emergency use: Keep a solar charging board to avoid an earthquake or power outage after a typhoon. “Product Specifications” Output: USB 1:5V / 2.4A; USB 2:5V / 2.4A When folding: about 30.5 x width 18 cm When unfolding: length about 30.5 x width 86 cm Weight: 650 grams Setting contents: solar charger, 2 hooks, instruction manual “Precautions” 1. Use in sunny places and in direct sunlight. 2. Please do not charge in the car/room. 3. Please note in advance that the charging rate may vary depending on the weather conditions. The solar charger has holes in every corner so you can easily connect to backpacks, tents, trees and more. It is easy to carry. Smart charging with SunPower technology The output can be up to 5V / 2.4A per port. It is an output with a total of 2 ports up to 22W. We can charge smart phones, mobile batteries, fans and other devices for USB charging communication. (※Because the water resistance of the panel is weak, please try not to expose it to water.)

No tools needed, simply twist nut to tighten. No washer needed.

Size: 1/4″-20
Material: Zinc Die Cast
Finsh: Zinc

PAGOW Upgraded Large Slotted Hurricane Wingnut Driver – Wing Nut Drill Bit Socket Tool, 1/4″ Hex Shank for Panel Wing Nuts, Screws Eye C Hook & Q-Hanger, Steel

Function

This wingnut driver is designed to tighten or loosen wing nuts, bolts, light hanger hooks quickly and effectively when installing hurricane shutters/panels or other DIY projects like Christmas lights,string lights etc, which saves lots of your time and gets the job done more faster.

Dimensions

Length: 78mm(3.1 inch);
Outer Diameter: 24mm(1 inch)
Drill bit slot is 7.5mm(0.3 inch) wide

Suitable for Q shaped light hanging hooks up to 4mmHow To Use

Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

100% Customer Service Satisfaction

If you have anything concerned with the wing nut driver, please first to choose contact us and we will take care of it for you.here is how Find your order in your amazon account, click the ” contact seller” button beside the order ID.