966 reviews analysed
1. Polycarbonate Plastic Sheet 12" X 24" X 0.0625" (1/16") 3 Pack for VEX Robotics Teams, Hobby, DIY, Industrial. Shatterproof, Easy to Cut, Bend, Mold.
2. The Hillman Group 831493 1/4 X 1-1/2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
3. Lexan Sheet – Polycarbonate – .236" – 1/4" Thick, Clear, 24" x 24" Nominal
4. Sidewalk Bolt Stainless Steel 1/4 x 1-1/4 (Pack of 25)
Feature
- Low-profile head can remain in place when panels are down
- Hurricane bolts can also be referred to as sidewalk bolts
- These stainless steel, combo-drive sidewalk bolts measure 1/4″ in diameter x 1-1/4″ in length and come in 25 pieces per retail package
- The combo head is Slotted and Phillips. The bolt is 1/4-20 (thread is 20) and the diameter of the head is 3/4″
- Country of Origin: Taiwan
Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
5. CONFAST 1/4" (Inside/Screw 1/4-20 Diameter) Machine Screw Anchor with 1 Setting Tool (100 per Box)
Feature
- SHALLOW EMBEDMENT OPPORTUITIES-Less time required to drill hole
- NATIONAL COARSE THREADS-Bolts and threaded rod is most common type available
- INTERNAL THREADS Easy-removabilityWORKS IN MOST MASONRY MATERIAL-Consistent holding values in wide variety of base materials
- REQUIRES THE USE OF A SETTING TOOL-Setting tool allows for proper positive expansion of the anchor
Description
Applications
The anchor is made from Anchor Body Antimonial Lead Alloy/Cone Zamac Alloy. This anchor is designed for use in Concrete, Block, and Brick.
Environment
The anchor is designed for use in a Moist environment.
Head Style
The anchor is a head
Hole Diameter/Bit Diameter
The anchor requires a 1/2″ hole to be drilled in the base material (Concrete, Block, and Brick). The hole should be drilled with carbide tipped bit that meets ANSI standards and used in a hammer drill.
Driver Required
A is required for driving the anchor into the base material.
Diameter of Anchor
The diameter of the anchor is 1/4″.
Length Anchor
The length of the anchor is 7/8″
Thread Length
The length of the threads on the anchor is in length.
Minimum Embedment
The minimum anchor embedment into the concrete is 7/8″. Therefore, the anchor must be installed so that a minimum of 7/8″ of the anchor is embedded into the concrete.
Maximum Fixture Thickness
The maximum fixture thickness or the maximum thickness of the material being fastened for a anchor is . This will ensure that the minimum embedment of 7/8″ will be met.
Fixture Hole Diameter
The hole in the fixture or material being fastened must be larger than the designated diameter of the anchor. The 1/4″ diameter anchor requires the hole in the fixture to be 9/16″.
Spacing between Anchors
Each anchor must be spaced a minimum distance of 5″ from each other when measured center to center.
Edge Distance
It is very important not to install the anchor any closer than 2-1/2″ from an unsupported edge of the concrete.
6. The Hillman Group 831494 1/4 X 2-Inch Stainless Steel Hurricane Bolt, 100-Pack
Description
Product Description
Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
From the Manufacturer
Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.
7. Simpson Strong Tie SPS25344-KT Storm Panel Screw, 305 Stainless Steel, 25 Screws, Wing Nuts and Caps and 1 Hex Driver Bit, 1 Carbide Drill Bit
Description
Product Description
Ideal for attaching storm panels to wood, concrete and masonry
From the Manufacturer
Ideal for attaching storm panels to wood, concrete and masonry
8. POWERTEC 71068 T-Track Knobs with 1/4-20 by 1-1/2" Bolts and Washers(Set of 10)
9. Hillman 707319 Zinc Die-Cast Washered Wing Nuts (1/4"-20) – 50 pieces
Description
Product Description
Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Tools are not needed to install this product; to tighten simply turn the nut by hand.
From the Manufacturer
Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Tools are not needed to install this product; to tighten simply turn the nut by hand.
10. The Hillman Group 831487 1/4 X 1-Inch Stainless Steel Hurricane Track Bolt, 100-Pack
Description
Product Description
Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.
From the Manufacturer
Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.
Conclusion
By our suggestions above, we hope that you can found Lexan Hurricane Shutters for you.Please don’t forget to share your experience by comment in this post. Thank you!
