Top 9 Led Turn Signal Relay For Kawasaki Ninja

Used for 2014-2020 Honda Grom, 2009-2012 Kawasaki ZX6R, 2008-2012 Kawasaki 250R, 2013-2017 Kawasaki Ninja 300, 2015+ Kawasaki Z300 and so on Motors to fix the LED Bulbs Related Turn Signal Light Hyper Flashing, not Function Properly issues etc.

Great for replacing a bad relay or correcting led or bulb turn signal problems (fast Flashing, no flashing)
Dimensions: 1.38″ (L) x 1.38″ (W) x 1.06″ (D)
Using advanced SMD chip technology,with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically.Allow more stable LED work.
Universal fit for many vehicles that use a 2-Prong (2PIN) flasher with a socket wired to SAE specifications.
Connection and adjustment Instructions:
1.Replace the stock relay in the fuse box. Please check your owner manual to locate the flasher. Pin B is power in, and Pin L is the adjustable power out.
2. You can use a flat head screw driver to adjust the knob on the bottom to set its flashing speeds from 50c/m to 200c/m. Clockwise: slower, Counter Clockwise: Faster.

Main features:
effectively prevent the original car halogen light bulb changing LED turn the light to appear flashing too fast or not flash

Spec:
Operating Voltage: 12V (11V-15V)
Max Power: 150W
Flashing Frequency: 90 Times/Min
Switch Power: 0.02A to 12A
Operating Temperature: -40°C to +80°C
Work to replace most 2-pin flasher (if the wirings orders are different, you can always remove the white adapter to plug in the wires/pins directly)

Known Fitments:
Honda CBR600 CB900 CBR1000 VTX1300 VT1300
Suzuki GSX R600 R750 R1100 GSF600S GSF1200S
Yamaha YZF FZ WR
Kawasaki Ninja ZZR ZX VULCAN, etc

Specifications:
Operating Voltage: 12V
Max power: 21W x 2 + 3.4W
Flashing Frequency: 50 times/min to 200 times/min
Switch Power: 0.02A to 12A
Operating Temperature: -40°C to +80°C
Work to replace most 2-pin flasher
Size: 3.2 x 3.4 x 2.2cm/1.26 x 1.34 x 0.87 inches

Features:
Speed adjustable
Stable and safe
Waterproof and durable

Package included:
2 x Motorcycle LED Flasher Relay

The Max power of the relay is 42W, which mean the power of your ( all ) LED bulbs must low than 42W. If more than 42 W, load resistors may be required.

This auction feature this 2-Pin Electronic LED Flasher Relay, works for most motorcycle/bike to fix the LED bulbs related turn signal light hyper flashing, not function properly issues.

By using this 2-pin LED flasher, you can install the LED bulbs for the motorcycle/bike for turn signal lights without have to cut the wires to install the load resistors and completely eliminate the LED rapid flashing problems. 

Besides, this 2-pin Electronic LED Flasher is also speed adjustable. You can use a flat head screw driver to adjust the knob on the bottom to set its flashing speeds from 50c/m to 200c/m.

More Details：

• Operating Voltage: 12V
• Max Power: 42W
• Flashing Frequency: 50 times/min to 200 times/min
• Switch Power: 0.02A to 12A
• Operating Temperature: -40°C to +80°C Work to replace most 2-pin flasher

Package Included:

• 1 x 2-Pin Relay

 About the Brand:

• Brand Name: AUDEW 
• Our Vision : Provide the most cheap beauty products to help you upgrade your beloved vehicle and let you feel the most sincere service Your encourage is our motivation to discover the trend of fashion and create your dreaming products. Make your car outstanding , enjoy your life.

Tips：

• If you find that it can not work with your led system when use it, Please contact us by Amazon email, we will give you a full refund.

2-Pin Motorcycle and Car Speed Adjustable LED Turn Signal Indicator Hyper Flasher Relay.
This 2-pin Electronic LED Flasher is also speed adjustable.
Universal fit for many vehicles that use a 2-Prong (2PIN) flasher with a socket wired to SAE specifications.
Fit for Harley Davidson,Honda,Kawasaki,KTM,Suzuki,Yamaha and many other brands as well.
Connection and adjustment Instructions:
Clockwise: slower, Counter Clockwise: Faster
You can use a flat head screw driver to adjust the knob on the bottom to set its flashing speeds from 50c/m to 200c/m .

EASY to install the LED bulbs for the car and motorcycle for turn signal lights without having to cut the wires to install the load resistors, completely eliminate the LED rapid flashing problems.
Using advanced SMD chip technology,with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically.Allow more stable LED work.

Tips:
1.If the flashing speed is not up to the individual requirements , flicker frequency can be adjusted to achieve the speed of requirement by adjusting the switch on the relay 2 pins flasher relay, can be fitted on most of motorcycle and car or any custom application .
2.Great for replacing a bad relay or correcting led turn signal problems (fast Flashing, no flashing).
3.Replace the stock relay in the fuse box. Please check your owner manual to locate the flasher. Pin B is power in, and Pin L is the adjustable power out.

2-pin electronic LED flasher relay fix for motorcycle or scooter use to prevent turn signal hyper flashing. Each LED flasher relay unit has a cube shape form factor and measures at 1.43″ x 1.33″ x 1.00″. The 2-pin CF-12 LED flasher is rated at 12V and has a wide working range of 0.02A to 10A and will work with either incandescent or LED turn signal light bulbs. Eliminate the need to wire in load resistors; simply plug the 2-pin flasher into your fuse box to normalize your turn signal blinkers’ flashing rate or to prevent weak/non-flashing LED blinking issues. Please note that the LED flasher relay is not made to fix low wattage or error message problems.

Have malfunctioning blinkers after installing LED signal lights? This hyper flash issue is caused when a thermal relay is connected to a low current consuming LED signal. The fix? An electronic signal relay will make sure your lights flash at a normal rate. This 2-pin, completely silent electronic relay also works with regular filament type bulbs up to 150W. To install your new relay, simply disconnect and replace the OEM 2-pin flasher.

NOTE: This 2-pin flasher relay will NOT replace a 3-pin relay. Make sure the pin configuration and dimensions will fit your specific application. Not compatible with COB (Chip-on-Board) LEDs

Specifications
• Wattage: 0.1W-150W
• Operating Voltage: 12V DC
• Lifetime: 400 working hours
• Dimensions: 1.5” x 1.4” x 1.25” (38mm x 36mm x 34mm)
• Includes a single flasher relay

With this 2-pin LED flasher, when install the LED bulbs for the motorcycle/bike turn signal lights, no need to cut the wires to install the load resistors and completely eliminate the LED rapid flashing problems.

And this LED Flasher is speed adjustable. You can use a flat head screw driver to adjust the knob on the bottom setting its flashing speeds from 50c/m to 200c/m.

Specifications:

Size: About 3.5 x 3.5 x 2.7cm (L x W x H)
Voltage: DC12V
Flashing Frequency: 50 times/min to 200 times/min
Power: 21W x 2 + 3.4W
Switch Power: 0.02A to 12A
Operating Temperature: -40°C to +80°C
Work to replace most 2-pin flasher
Package Weight: 10g
Package Size: 50*40*30mm

Package Contents:

1 x 2-Pin LED Turn Signal Flasher Relay

5 Pin EP27 FL27 Electronic Flasher Relay For Car Vehicle LED Turn Signal Light Bulbs Hyper Blink Flash Fix