The Best Keurig K70 Air Pump

Widely used to provide oxygen in aquariums, fish farms & hydroponic systems. Includes chrome air manifold, ranging from four to Sixteen outlets. Cylinders & pistons are made of excellent materials, making the pump strong, durable. Convenient to operate without oil or much noise.

This commercial air pump with 12 Outlets is perfect to run several waterfarms or multiple air stones at once. Electrical magnetic air compressor in a high quality aluminum alloy case, wear and tear resistant material for cylinder and piston. High pressure and high output, comes with multi-outlet divider. Super silent with multi-level muffler, low power consumption. Special artificial rubber to keep a steady air flow output and pressure that can be adjusted freely. 1-Year warranty. 110-LPM, 120-voltage. 1750-GPH, maximum amperage is 1 and maximum decibels is 60. Measures 11-1/2-inch length by 6-2/5-inch width by 7-inch height. This product weighs is 11.5-pound.

General Hydroponics’ Dual Diaphragm Air Pump is the only air pump in the world that is manufactured exclusively for use with hydroponics systems. This high output pump (320 GPH/24,800 cc/min capacities) has four adjustable 1/4″ outputs or valves that can be teed off twice to power up to eight WaterFarm units. In addition, growers who use our Dual Diaphragm Air Pump can count on it to reliably oxygenate their reservoir with air stones. • This high output pump (320 mph/24,800 cc/minute capacities) has four adjustable 1/4″ outputs

The Avalon 2 Stage replacement water filters are suitable for Avalon Bottle-less Water Coolers manufactured after April 1, 2018. It consists of 2 filters. An NSF certified activated carbon filter which will eliminate chlorine, lead, rust, bacteria, or any harmful or unwanted minerals from the tap water that flows through it. As well as a sediment filter to filter out any rust or large particles of dirt in the water. The filters can be easily replaced into the cabinet of the water cooler. The filters have a capacity of 1,500 gallons of water and is made to last for 6 months of use. They have a flow rate of 0.5 gallons per minute. Both filters must be used together. Your water will be tasting crisp and pure with these installed in your water cooler.

The Keurig K-Elite brewer blends a premium finish and programmable features to deliver both modern design and the ultimate in beverage customization. With a striking brushed finish and metal details, it’s a stylish addition to any kitchen. The Keurig K-Elite single serve coffee maker features Strong Brew for when you want to brew a bolder cup of coffee, and an Iced button to brew hot over ice for a refreshing, full-flavored iced coffee. It features five brew sizes, so you can brew your favorite coffee, tea, hot cocoa, or iced beverage at the touch of a button. Choose from hundreds of delicious varieties of K-Cup pods, or brew your own ground coffee using the Universal My K-Cup Reusable Coffee Filter (sold separately). The K-Elite brewer offers programmable features like auto on and temperature control, as well as providing hot water on demand for instant soups and oatmeal, and the large 75oz removable water reservoir lets you brew 8 cups between refills. Keurig pods are BPA-free and constructed using only FDA approved food grade materials. In addition, the temperature of the water dispensed in Keurig brewers is well below the melting and softening points of the pod materials. Therefore, no plastic leaches from the pod into your beverage. We regularly review the components used in our products to ensure that they are safe and meet or exceed applicable FDA standards.

Replacement filter for the Keurig B150, K150, B150P, K150P, B155, K155, B200, K3000, K3000SE, B3000, B3000se, and Keurig Bolt brewing systems. Replaces the older Q5486, KQ8, and KQ8a filters. MADE IN THE USA.

PROVIDES CRISP, CLEAN WATER: Removes Chlorine and improves taste and odor. Stops scale from building up inside the brewer’s internal water tank by preventing mineral deposits which hinder the machine from functioning properly.

EASY TO INSTALL: Filter simply screws into your existing head unit. Replacement of the spent media bed is completed in a matter of seconds by detaching the filter body from a permanent head with a twist of the wrist. The new filter body is just as easily threaded into the head and the replacement is then complete.

PureWater Filters Quality:

• Granular Activated Carbon (GAC): Made from raw organic, high-carbon materials and small, extremely porous granules with high surface area to remove chlorine, tastes and odors, and a wide range of toxic organic chemicals (VOCs).
• Polypropylene Depth Filtration: Made from Class 1 filtration media, Tested and Certified by NSF International against ANSI/NSF Standard 42 for Taste and Odor Reduction and Chlorine Reduction Class I.
• Polyphosphate Scale Inhibitor: Added NSF Food Grade polyphosphate to prevent scaling and corrosion of pipes and equipment (due to lime, iron, and other water contaminants) by forming a protective film to prevent contaminants from reacting with your equipment.

The PureWater Filters® Promise: Rest assured, all of our products come with:

• Lifetime Warranty for Defective or Malfunctioning Parts, and
• FREE Lifetime Telephone Support – Get help with installation, trouble-shooting tips, and answers to product related questions.

Service life on filter is 1,250 gallons/6 months. For replacements use PureWater PW5486, UPC 6527853421188

Ulka Pumps for Breville Espresso Machines.

Keep your Keurig brewer working at its absolute best with this Descaling and Maintenance Kit. The kit includes one box of 10 Keurig Rinse Pods, which helps extend the life of your brewer by removing deposits and scale that build up in the needle head (the thing that punctures the K-Cup). Works quicker and easier than descaling solution. Also included are two high quality replacement charcoal water filter cartridges to help remove impurities and enhance beverage taste. 4 month supply.

Instructions:

• Place a large mug on the Drip Tray. Lift Handle and insert Keurig Rinse Pod in Pod Holder
• BREW Lower Handle and brew once on the 8 ounce brew setting. If your brewer has the option, use the COCOA/OTHER button to brew
• REMOVE Remove and discard Rinse Pod and the brewed rinse solution
• RINSE Lower Handle and perform an 8oz. water brew to complete rinse
• We recommend using Rinse Pods once a week, or after brewing flavored beverages

Compatibility: Compatible with all K-Cup and Keurig 2.0 brewers.