Top 9 Irobot 500 Ir Sensor

0
690 reviews analysed

1. iRobot Roomba 500/600/700/800 Wall Sensor Bumper IR Array

iRobot Roomba 500/600/700/800 Wall Sensor Bumper IR Array

Feature

Description

This Roomba iRobot IR sensor array can be used to repair a Roomba 500/600/700 series that is no longer slowing down when approaching objects. This item is the piece that fits just inside the front bumper on your Roomba.

2. Roomba 500 Series White Bumper IR dock sensor 510 530 535 540 531 536 537

Roomba 500 Series White Bumper IR dock sensor 510 530 535 540 531 536 537

Feature

Description

This is a replacement IR sensor for your roomba 500/600 series. Comes in white, but is also compatible with the black roomba sensor. You can even reuse your existing white/black piece if necessary. Connector color may vary (black/white) but wire configuration is the same red|black|white for all models so if yours is different you can reuse your existing connector to the PCB.

3. BAFX Products IR Remote Control Extender/IR Repeater Kit/BAFX3233

BAFX Products IR Remote Control Extender/IR Repeater Kit/BAFX3233

Feature

4. Infrared Resources External Universal IR Receiver Extender for VERIZON FIOS, SA/Cisco Explorer, Comcast, Samsung,PACE,Motorola,Arris,

Infrared Resources External Universal IR Receiver Extender for VERIZON FIOS, SA/Cisco Explorer, Comcast, Samsung,PACE,Motorola,Arris,

Feature

5. Infrared Resources 9ft 38-56kHz Dual Band External Universal IR Receiver Extender for Verizon FiOS + Most Cable Boxes and DTA Units.

Infrared Resources 9ft 38-56kHz Dual Band External Universal IR Receiver Extender for Verizon FiOS + Most Cable Boxes and DTA Units.

Feature

6. MAXZONE IR Infrared Emitter Extender Cable Extension Single HeadEye 3.5mm Jack Infrared Red Transmitter Blaster Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (IR-1.5m)

MAXZONE IR Infrared Emitter Extender Cable Extension Single HeadEye 3.5mm Jack Infrared Red Transmitter Blaster Eye Wire Cord Compatible with IR Repeater Extender System Kit, Xbox One (IR-1.5m)

Feature

Description

Function:
An IR extension cable is a thin cable with an IR emitter(s) on the end. It allows you to emit IR signals to a location that the your remote control or IR repeater system block can’t reach.
You can position an emitter in otherwise difficult-to-access spaces and work around things like media cabinets, decorations, and so on.
These small emitters have a self adhesive pad that allows it to be stuck directly to the IR sensor window of your AV device, or can be used as a flood for multiple devices when properly mounted. This IR extension cable comes with a 3.5mm plug at one end and an IR emitter at the other. The total length of the cable is 10 feet. It allows you to emit IR signals to a location that the your remote control or IR repeater system block can’t reach. You can position an emitter in otherwise difficult-to-access spaces and work around things like media cabinets, decorations, and so on. These small emitters have a self adhesive pad that allows it to be stuck directly to the IR sensor window of your AV device, or can be used as a flood for multiple devices when properly mounted. Direct connection the device will always provide you the best performance. It is compatible with many devices such as Xbox One, TV, DVD player, Bluray player and many more. Try it now and control your devices by a single control.

Package Content:
1x Single 1 Eye Single Infrared 3.5MM Remote Control Extender Emitter Cable Wire.

7. HiLetgo 10pcs IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-Wire Reflective Photoelectric for Arduino Smart Car Robot

HiLetgo 10pcs IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-Wire Reflective Photoelectric for Arduino Smart Car Robot

Feature

Description

Feature:
1, When the module detects an obstacle in front of the signal, the green indicator lights on the board level, while the OUT port sustained low signal output, the module detects the distance 2 ~ 30cm,
detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer, detects the distance increases; counterclockwise adjustment potentiometer, reducing detection distance.
2, The sensor active infrared reflection detection, target reflectivity and therefore the shape is critical detection distance.
Where the minimum detection distance black, white, maximum; small objects away from a small area, a large area from the Grand.
3, the sensor module output port OUT port can be directly connected to the microcontroller IO can also be directly drive a 5V relay; Connection: VCC-VCC; GND-GND; OUT-IO
4, comparators LM393, stable;
5, the module can be 3-5V DC power supply. When the power is turned on, the red power indicator lights;
6, with the screw holes 3mm, easy fixed installation;
7, board size: 3.2CM * 1.4CM
8, each module has been shipped threshold comparator voltage adjusted by potentiometer good, non-special case, do not adjustable potentiometer.

PIN Description:
1 VCC 3.3V-5V external voltage (can be directly connected to 5v and 3.3v MCU MCU)
2 GND GND External
3 OUT small board digital output interface (0 and 1)

Package Includes:
10 * IR Infrared Obstacle Avoidance Sensor Module

8. Gikfun Infrared Diode Led IR Emission and Receiver for Arduino (Pack of 10 Pairs) EK8460

Gikfun Infrared Diode Led IR Emission and Receiver for Arduino (Pack of 10 Pairs) EK8460

Feature

9. DAOKI 5 PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-wire

DAOKI 5 PCS IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot 3-wire

Feature

Description

Description:
1. When the module detects an obstacle in front of the signal , the green indicator light on the board level , while low-level continuous output signal OUT port , the module detects the distance 2 ~ 30cm, detection angle 35 °, the distance can detect potential is adjusted clockwise adjustment potentiometer to detect the distance increases ; counterclockwise to adjust the potentiometer to reduce the detection distance .
2 .active infrared sensors to detect the reflected , and thus the shape of the reflectivity of the target detection range is critical . The minimum detection distance which black , white maximum ; small objects from a small area , a large area from the Grand .
3 . the output port OUT sensor module can be directly connected to the microcontroller IO port , you can directly drive a 5V relay ; Connection : VCC-VCC; GND-GND; OUT-IO.
4 .using the comparator LM393, stable .
5 .can be used for 3-5V DC power supply modules . When the power is turned on, the red power.
6. with the screw holes of 3mm , easy fixed installation .
7.board size : 3.1CM * 1.5CM.
8.each module shipments comparing the threshold voltage has been adjusted by the potentiometer is good , not exceptional circumstances, do not arbitrarily adjust the potentiometer.

Interface Description (3-wire):
1. VCC: external 3.3V-5V voltage (can be directly connected to 5v MCU and 3.3v MCU)
2. GND: GND External
3. OUT: small board digital output interfaces (0 and 1)

Package Include:
1 x Infrared obstacle avoidance module

Conclusion

By our suggestions above, we hope that you can found Irobot 500 Ir Sensor for you.Please don’t forget to share your experience by comment in this post. Thank you!

Home Previews
Logo
Enable registration in settings - general