Top 10 Installation Service Dishwasher

Compatible with the following /Zenith models:
LDF6810BB ; LDF6810ST LDF6810WW ; LDF6920BB LDF6920ST ; LDF6920WW LDF7810BB ; LDF7810ST LDF7810WW ; LDF7932BB LDF7932ST ; LDF7932WW LDF8812ST ; LDF9810ST LDF9932ST ; LDS4821BB LDS4821ST ; LDS4821WW LSDF795ST

Product Description

When compared to gas type thankless water heaters, Stiebel Eltron tempera 36 plus cost less and is less expensive to install, since it does not require venting parts.

From the Manufacturer

The Tempra® Plus is the most technologically advanced tankless water heater available on the market today. Advanced Flow Control is exclusive to the Tempra® Plus and ensures a constant temperature output no matter how great the hot water demand is. Advanced Flow Control technology works by automatically adjusting the flow of water to eliminate unpleasant temperature fluctuation. What that means to you is a consistently satisfying experience every time, all the time !

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for climates where incoming water temperature is 67°F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67°F and an output setting of 105°F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

NOTE : 11Kw at 220 is equal to 13kw at 240.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

Product Description

This Smart Technology electric tankless water heater is configured as a “whole home” model for one bathroom residences in climates where incoming water temperature is 67°F and above. This model is well suited for heating nearly 1.5 gallons per minute to 105°F at that inlet temperature, which is the equivalent of one water saver shower head. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 8 requires a minimum 100 amp electrical panel for installation with (1) 40 amp double pole breaker connected to (1) set of #8 awg wire. Plumbing connections are 1/2″ compression fitting with the option of 1/2″ NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.

From the Manufacturer

This Smart Technology electric tankless water heater is configured for climates where incoming water temperature is 67 Degree F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67 Degree F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. Prior to purchase and installation please verify this model is the rights size for your hot water needs and electrical requirements.

The ECO line by Marey is designed using SMART Technology. It is the only one in the market that does not accumulate sediments, as the water never touches the heating element! The 220V ECO110 by Marey provides 11kW of power, being the perfect solution for 2 points of use in Southern areas (a shower and a sink). This unit provides 28°F increase at 3.0 GPM, allowing you to have a shower and a sink running simultaneously in hot climates. The 220V ECO110 reaches 56 °F at 1.5GPM for hot water output at one point of use at time. In colder regions, the 220V ECO110 is suitable to provide hot water for a single point of use such as a sink. Marey´s 220V ECO110 is ETL approved. It performs best in the US Southern regions where the incoming water temperature is above 70°F. This unit must be installed no more than 40 feet from the intended point of use. The complete ECO line by Marey is designed with corrosion resistant heating elements which reduce hard water build up from chlorine and calcium.

Product Description

This 3-prong dishwasher power supply kit fits most major brands and includes everything you need for easy installation. The kit contains (1) 6 feet dishwasher 90 Degree power cord, (1) metal strain relief, (3) wire nuts and installation instructions. This kit is for close clearance connections. The strain relief is for added safety.

From the Manufacturer

This 3-prong dishwasher power supply kit fits most major brands and includes everything you need for easy installation. The kit contains (1) 6 feet dishwasher 90 Degree power cord, (1) metal strain relief, (3) wire nuts, and installation instructions. This kit is for close clearance connections. The strain relief is for added safety.

For over 75 years InSinkErator has been known for building the world’s best food waste disposers. Badger, our standard disposer line, is basic, reliable, and functional. Available in various models and sizes for a range of applications, InSinkErator also manufactures a premier line of disposers, the Evolution Series. InSinkErator food waste disposers are the only disposers that are proudly made in the U.S.A. InSinkErator has grown into the largest food waste disposer manufacturer and best-selling garbage disposer brand in the world.

Product Description

This 6-Feet nylon braided, industrial grade dishwasher hose fits most dishwashers and includes a 3/8-Inch compression fitting and elbow. Hose is better than stainless and will not conduct electricity like stainless steel.

From the Manufacturer

This 6-Feet nylon braided, industrial grade dishwasher hose fits most dishwashers and includes a 3/8-Inch compression fitting and elbow. Hose is better than stainless and will not conduct electricity like stainless steel.