692 reviews analysed
1. WIDGETCO 1/4" x 1" Screw Thread Protectors, White – Works w/Many Hurricane Shutters
Description
1/4 inch x 1 inch White Screw Thread Protectors fit 1/4 inch (1/4-20) screws and bolts. Simply slide over the threaded end of the screw or bolt. Functions as a Thread Protector, Mask (for painting), Insulator, Decorator, Seal or to Color Code. Ideal for Hurricane Shutters.
2. ColdTuna Ultimate Rod Sitter – 10 Fishing Rod Storage Rack
Feature
- Capacity: Secure up to 10 freshwater, saltwater, or fly-fishing rods with the reel still attached.
- Mounting Options: Overhead, Vertical, or Horizontal – capable of mounting to a ceiling or a wall, at any angle.
- Maintenance Free: No corrosion here. Hot and Cold climates have no impact on these racks.
- Module Design: Allows multiple units to be placed next to each other, keeping your rods in a linear formation and providing unlimited fishing rod storage capacity.
- Quality: Solid – injection molded unit made of ABS plastic, 1/4″ thick! The 90 degree bend at the top makes these racks very sturdy and allows it to be mounted to virtually any flat surface!
Description
Ultimate Rod SitterColdTuna’s Ultimate Rod Sitter with Shock Cord Provides the Solution to Those Who Require Rod Storage in A Boat, Motor Home,Camper, RV, Trailer or Any Other Moving Vessel. These High Quality Rod Racks Feature a 3/16″ Shock Cord Closure That Hold Your Rods In Place When Your Going To Your Next Fishing Destination.How It WorksAfter mounting your rod rack, simply insert the rod butt into the hole, and the rod tip into the “T” shaped slot. When inserting into the “T” slot, you can either push your rod tip through the shock cord and into the rack, creating a secured hold on your rods, or remove the shock cord, insert your rods into the rack, and then re-secure the shock cord, creating a safety net in case your rods are bumped out of the rack.BenefitsIf you have too many rods to count, this is the perfect solution to get your sticks in order. The multiple mounting options allow you to place the Ultimate 10 Rod Sitter virtually anywhere. No more tripping over your rods, moving them all around the garage and wondering if the kids are going to bust a tip off your favorite stick. Instead, your rods will not only be safe and secure, but will be displayed nicely as well.Places To MountFishing boat, cabin cruiser, above garage door, on garage door, camper, RV, truck bed, tonnu cover, ceiling (overhead storage), wall (horizontal or vertical), closet ceiling, closet door.
3. National Hardware N179-531 4000BC Steel Threaded Rod in Zinc plated
Description
Product Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Zinc plating offers corrosion resistance for all of your functional hardware needs.
From the Manufacturer
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Zinc plating offers corrosion resistance for all of your functional hardware needs.
4. National Hardware N179-812 4005BC Smooth Rod in Zinc plated
5. Richards Homewares Aluminum Shepherds Hook with with Cushion Handle, 36-62"x2.75"x1.25", Silver
6. PRIMECO New WR55X10942 Control Board Motherboard for GE Refrigerator PS2364946 AP443621 WR55X10942P by Primec Supply – 1 Year Warranty
Feature
- Quality Replacement Refrigerator Main Board for GE
- Part Numbers
- WR55X10942 PS2364946 AP443621 WR55X10942P
- Quality Design Backed by 1 YEAR WARRANTY for Peace of mind
- Contact Us for compatibility Questions /
- A constant clicking from the motherboard indicates a bad board. A bad motherboard may show burnt marks or bad soldering joints from overheating on the front or back of the board. If the refrigerator lights dim when you get ice/water, or if the ice melts and refreezes are also signs of a bad motherboard. A hum and then a click a few seconds later from the compressor indicates a compressor or relay issue but not a motherboard problem.
Description
GE BOARD ASM MAIN CONTROL part # WR55X10942P, this is the same part as WR55X10942, (this part replaced the WR55X10942 part in the NEW catalog. The P at the end of the part # is GE’s Internal part number)
7. PAGOW 2-Pack Hurricane Wingnut Driver – Wing Nut Drill Bit Socket Tool, 1/4" Hex Shank for Panel Nuts, Screws Eye C Hook & Q-Hanger, Steel
Feature
- This wingnut driver designed to tighten or loosen wing nuts, bolts, hooks quickly and effectively when installing hurricane shutters/panels or doing other projects, and saves lots of your time and get your job done more faster.
- Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.
- This Steel wing nut driver is a perfect tool that works with any power drill (1/4 inch hex shank). The total length of the tool is about 6.55cm(2.6 inch)
- the outer diameter of the socket is about 17.8mm(0.7 inch)
- and the slot cutout is 4mm(0.157 inch) wide.
- This little wing nut driver is made from CR-V steel, highly strong and sturdy.
8. National Hardware N179-507 4000BC Steel Threaded Rod in Zinc plated,5/16"-18×36"
Description
Product Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Zinc plating offers corrosion resistance for all of your functional hardware needs.
From the Manufacturer
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Zinc plating offers corrosion resistance for all of your functional hardware needs.
9. National Hardware N179-648 4000BC Steel Threaded Rod in Zinc plated
Description
Product Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Zinc plating offers corrosion resistance for all of your functional hardware needs.
From the Manufacturer
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Zinc plating offers corrosion resistance for all of your functional hardware needs.
10. National Hardware N179-754 4005BC Smooth Rod in Zinc plated,3/16" x 36"
Description
Product Description
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Zinc plating offers corrosion resistance for all of your functional hardware needs.
From the Manufacturer
Whether for home, farm, builder or industrial customers, National has all the right hardware in the sizes and finishes you need. With over a century of service National is committed to maintaining the highest level of product quality, innovation and manufacturing technology. Quality metal sheets and rod both threaded and smooth for all for your construction projects. Plated steel has increased resistance to corrosion thanks to its zinc-plated and galvanized finishes. Perforated tubes, slotted flats and angles, smooth rods and threaded rods are among the top popular plated steel products. Zinc plating offers corrosion resistance for all of your functional hardware needs.
Conclusion
By our suggestions above, we hope that you can found Hurricane Shutter Rods for you.Please don’t forget to share your experience by comment in this post. Thank you!