Top 10 Hurricane Shutter Panel

QUALITY.

The washered wing nuts are made of zinc die cast, this will protect them from rust and corrosion and ensure the durability and longevity of the product.

PURPOSE.

The HighWind Solutions by Mountwell Hardware washered wing nut can be used in many applications.

It is great to use with hurricane panels and shutters that utilize the “F” track design and also with anchored bolts .

INSTALLATION.

Installation is simple. With the wide wings, you can simply install and tighten by hand.

To ensure the proper installation we recommend using the available wing nut driver.

This will not only make the job faster but will also ensure that the panels are on securely.

**Only tighten panels to the manufacturers specifications.**

THE MOUNTWELL HARDWARE GUARANTEE

We take pride in our product quality and craftsmanship and all of our products are backed by our 100% money back guarantee.

Product Description

Hurricane Bolts are made of strong bad durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

From the Manufacturer

Hurricane Bolts are made of strong abd durable stainless steel. They are ideal for installing hurricane panels to storefronts and sliding glass doors. Normally used in conjunction with lead anchors.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows. You can adjust the number of clips used toaccount for different shapes and sizes of windows. Note: The new design will keep the clips on place even for thinner plywood. For additional stability – use small screw or nail to keep the clips in place when installing it to a board. Or you can use a pliers to tighten the opening of the clip to make it more secure.

1/4 inch x 1 inch White Screw Thread Protectors fit 1/4 inch (1/4-20) screws and bolts. Simply slide over the threaded end of the screw or bolt. Functions as a Thread Protector, Mask (for painting), Insulator, Decorator, Seal or to Color Code. Ideal for Hurricane Shutters.

Hillman 1/4-20 100 Pc. XL Washered Wing Nut. Wing Nuts can be used where frequent fastener connection adjustments or removals are needed and can be made quickly and often. Tools are not needed to install this product, to tighten simply turn the nut by hand. This nut has a wing on each side that helps you to tighten the nut without tools. Made of Zinc Die Cast, will not rust or corrode. These nuts have a built in washer. Various sizes available. Includes 1 pack of 100 pieces of wing nut per pack.

EASY to install & remove – Simply install clips and push plywood into the window and press hurricane clips in place to securely fasten the window protection NO screws, nails, brackets or bolts that permanently damage your property HOLDS plywood in window casing to protect windows during high wind events LASTING – Store in a dry place and use again and again 10 CLIPS – Fits 1/4 inch to 1/2 inch plywood to hold in your window casing. The clips will work on blocks, brick, wood, stucco, vinyl, etc as long as you have a window casing that provides 2+ inches of space between the window and outside wall. The clips need enough room to grab the casing and hold the wood in place. Using Window Clips To help ease the process and to cut time, there is a product available that can make boarding easier and more effective: HURRICANECLIP window clips. Some facts about window clips:Available in a variety of economical package sizes and quantities.Clips securely attach to 1/2″ plywood which the fits into exterior window casings. No special tools, caulking, adhesives or glue required. Install and remove with one person.Clips create rigid, safe, temporary attachment of plywood to brick, wood, or stucco window casings. No nails, screws, bolts or brackets will permanently damage your property.Clips require no drilling into your home or window casingsClips hold plywood sheets in window casings as well or better than any hardware available today.Clips are rugged and will last year after year. If you move, take them with you. Installing the ClipsPlace the clips on each plywood cover (if the window is 24”x24” or smaller, only two clips are needed). – Each clip should be placed on the edge of the plywood cover no more than 24 inches apart. – Make sure the tension legs are facing towards you.Push the plywood covers with the clip tension legs to the outside firmly into the casing.Clips work as well in round windows as they do in rectangular windows.

PAGOW 2 Pack Upgraded 7.5mm/0.3 inch Large Slotted Hurricane Wingnut Driver – Wing Nut Drill Bit Socket Tool, 1/4″ Hex Shank for Panel Wing Nuts, Screws Eye C Hook & Q-Hanger, Steel

Function

This wingnut driver is designed to tighten or loosen wing nuts, bolts, light hanger hooks quickly and effectively when installing hurricane shutters/panels or other DIY projects like Christmas lights,string lights etc, which saves lots of your time and gets the job done more faster.

Dimensions

Length: 78mm(3.1 inch);
Outer Diameter: 24mm(1 inch)
Drill bit slot is 7.5mm(0.3 inch) wide

Suitable for Q shaped light hanging hooks up to 4mmHow To Use

Just pop it into a power screwdriver and get the wing nut / shutters installed without concern about spraining your thumbs by using other hardware tools, saves wears and tears on your fingers.

100% Customer Service Satisfaction

If you have anything concerned with the wing nut driver, please first to choose contact us and we will take care of it for you.here is how Find your order in your amazon account, click the ” contact seller” button beside the order ID.

Product Description

Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.

From the Manufacturer

Hurricane track bolts are used in any of the F Tracks (sill tracks) to secure your panel(s) or wind screens. The track bolts have a square head that slides into the track allowing you set the location of the fastener where ever it’s needed. Used for protection from hurricanes.