696 reviews analysed
1. GE Socket Adapter, Pull Chain Control, Polarized, 2-Prong Outlet, Perfect for Workshop, Garage or Utility Room, UL Listed, Light Almond, 54180
Feature
- Power More – Add outlets where you need them with the GE 2-Outlet Socket Adapter
- Keep the Lighting – With two additional outlets, you can also keep the functioning light socket that turns on and off with the attached pull chain
- Indoor Use Only – This adapter is for indoor use only and is perfect for workshops, garages or utility rooms
- Easy to Install – Turn off the light fixture, remove existing bulb, screw in the adapter, replace the bulb and plug in desired electronics
- Power – No not exceed the electrical ratings for the switch/lamp holder at 125VAC, 250W and outlets at 125VAC and 660W
Description
Add additional outlets while still using the light socket for lighting with the GE 2-Outlet Socket Adapter. This adapter is perfect for workshops, garages or utility rooms in getting more outlets where you need them. The light is controlled by the attached pull chain. The adapter is for indoor use only. To install, just turn off the fixtures and take out the existing bulb. Then screw in the adapter and replace the bulb. You can turn on the lighting fixture and start using the additional outlets. Do not exceed the electrical ratings for the switch/lamp holder at 125VAC and 250W, and the outlets at 125VAC and 660W. The GE 2-Outlet Socket Adapter is UL Listed.
2. Onite E26 to 2 Outlet Socket Adapter, Light Holder Splitter, Pull Chain Switch Black, 2-Pack
Feature
- METERIAL: Construction is no frills, but solid, made of metal and bakelite. The heat resistant is up to 200 degree.
- 300 Watt 110-250 Volt, Two outlet socket adapter Perfect for workshops and garages, split your e26 socket to 2 outlets and 1 sockets, with pull chain switch for the light(don’t control the outlet)
- 300 Watt 110-250 Volt, Two outlet socket adapter Perfect for workshops and garages, split your e26 socket to 2 outlets and 1 sockets, with pull chain switch for the light(don’t control the outlet)
- UL Listed, insulation Flame retardant Heat resistant, durable, anti-burning and long-lasting. MAX WATTAGE: 300 Watts max wattage, Voltage is 110V, allows you to use high wattage light bulb. The adapter will not convert the voltage. If you have 110V, it will stay 110V. Likewise, 220V will not change. This adapter is for physical dimensions only.
- Package: 2-Pack. EASY TO INSTALL: The bulbs fit into the adapters very easily and each one of ours fits securely. Doing this enabled us to replace the old CFL’s we had with something that is non-toxic and uses less electricity. SATISFACTION GUARANTEED: 100% satisfaction guaranteed. 60 days changing or refunding without reasons. Onite always stand back for its products, any issue of the product please don’t hesitate to contact us.
3. Rextin Medium Edison E26 Socket adapter Base Male Screw In Light Bulb Socket Pigtail For Led Ceiling lights downlight Pack of 10 (10pcs Socket Base)
Feature
- Use this E26 adapter to convert downlight ceiling light bulb sockets to LED housings lights
- E26 the US Standard Screw Light Holder with 2 wires (Black positive and white negative) electrical leads ready to connect ,easy to install ,Wires are 32cm /12.6 inches long,perfect for downlight ceiling lights or other led housing lights
- The outlet Socket Adapter: Max 660W-660V
- UL Listed, insulation Flame retardant Heat resistant,Durable
- It is a great converter,connecting to a switch light socket ,allowed you to turn on/off the switch to control the light fixtures connected to the converter,perfect for many recessed lights
4. 2 Outlet Light Socket Adapter,E26 Bulb Socket to Outlet Splitter,Converts Medium Screw Socket into a Socket with Two outlets,Polarized Outlet,With Pull Chain Switch. UL Listed, White (2-Pack)
Feature
- SAFE MATERIAL -The UL Listed adapter is composed of Eco-friendly Urea Resin, copper connector.The outlet receptacle carries electric rating up to 660W 125V. And the extended socket carries a E26 Screw bulb light up to 250W
- HANDY OUTLET ADAPTER -Easy way to add an outlet where you need it.Play and plug, no need to pay an electrician when you can make power available yourself
- WITH PULL CHAIN SWITCH -The pull chain add a switch of the place where there isn’t a light switch. Even there is a power switch, the pull string could be conveniently used to control the separate light bulb
- WIDE APPLICATION – Great way to add outlets for Christmas LED string lights
- connect shop lights to an existing bulb socket
- plug in security camera into front door light socket/ porch light socket
- install strip lights/T5 LED Light with an AC plug
- Perfet for adding a temporary outlet at a light socket in garage,basement,workshop,utility room etc
- MONEY BACK GURANTEE – 3 Months money back guarantee and 1 Year quality assurance under normal use. Feel free to buy from Emnooti with confidence
Description
The crafted designed adapter is to transform Medium Screw Socket into a Socket with Two outlets.
It fits for regular base light bulbs E26 Sockets. And the outlets are polarized, one slot is longer than another.
The outlet adaptor is not water resistant. If you want to use it in outside to give extra outlets for cord Christmas string light or device with AC plug ,keep the outlet adapter covered/dry (like on a covered front porch in porch light socket, Covered floodlight socket ,ect).
This adapter only works with two pronged devices(no ground.NOT GOOD FOR 3 PRONG devices.)
Note:
-The pull chain switch controls the screw-in light bulb.The two outlets are “always on”.
-For your safety use, do not exceed the electrical ratings for the outlets at 125VAC and 660W and switch/lamp holder at 125VAC, 250W.
Specs:
Max Wattage / Voltage for outlets: 660W / 125V ( Recommended the amperage of all your combined devices is less than 5 amps )
Max Wattage / Voltage for socket extender: 250W / 125V
Length of the pull chain: 5 inch
Package:
-2 X White Outlet Socket Adapter
5. GE Porcelain Lampholder, Grounded with Pull Chain, White 18305
Feature
- Repair or Replace – With the GE Medium Base Porcelain Lamp holder with Outlet, you can install a multipurpose lighting fixture for your home, garage or office
- Do It Yourself – Install the porcelain lamp holder with the attached instructions, and mount on a 3-1/4” or 4” standard box
- Added Outlet – Get the most out of this lamp holder with the 3-prong outlet at the base that you can power standard electronics even when the light is turned off
- Pull Chain — Turn the lamp on and off with the attached pull switch
- Power – This lamp has an electrical rating of 250VAC and 660W, the outlet has an electrical rating of 15A, 125VAC, and accepts most light bulbs
6. Maxxima Dual Outlet Light Socket Adapter, with Pull Chain, Turn E26 Standard Light Socket into Electrical Outlets (Pack of 3)
Description
This is a two-outlet light socket adapter that allows you to use your light bulb socket as a plug outlet in addition to handling your lighting needs. This extender has an E26 base that works with LED, CFL and standard household light bulbs. The additional two electrical outlet receptacles are an efficient way to add more versatility to your space. The convenient pull chain makes it easy to set up your area for temporary or long-term use. This product is UL Listed.
7. Leviton 1406 660 Watt, 125 Volt, Two Outlet with Pull Chain Socket Adapter, Black
Description
Product Description
Leviton 1406 660 Watt, 125 Volt, Two Outlet With Pull Chain Socket Adapter, Black
From the Manufacturer
Leviton Electrical Accessories for the home include taps and adapters, night lights and battery operated lighting. Every electrical accessory is subject to Leviton’s strict in-house quality control and must meet or exceed applicable industry standards. 660 Watt, 125 Volt, Two Outlet With Pull Chain Socket Adapter, Black.
8. 2 Outlet Light Socket Adapter,E26 Bulb Socket to Outlet Splitter,Converts Medium Screw Socket into a Socket with Two outlets,Polarized Outlet,With Pull Chain Switch. UL Listed, Black (3-Pack)
Feature
- SAFE MATERIAL -The UL Listed adapter is composed of bakelite, copper connector and alumiumn screw .The outlet receptacle carries electric rating up to 660W 125V. And the extended socket carries a E26 Screw bulb light up to 250W
- HANDY OUTLET ADAPTER -Easy way to add an outlet where you need it.Play and plug, no need to pay an electrician when you can make power available yourself
- WITH PULL CHAIN SWITCH -The pull chain add a switch of the place where there isn’t a light switch. Even there is a power switch, the pull string could be conveniently used to control the separate light bulb
- WIDE APPLICATION – Great way to add outlets for Christmas LED string lights
- connect shop lights to an existing bulb socket
- plug in security camera into front door light socket/ porch light socket
- install strip lights/T5 LED Light with an AC plug
- Perfet for adding a temporary outlet at a light socket in garage,basement,workshop,utility room etc
- MONEY BACK GURANTEE – 3 Months money back guarantee and 1 Year quality assurance under normal use. Feel free to buy from Emnooti with confidence
Description
The crafted designed adapter is to transform Medium Screw Socket into a Socket with Two outlets.
It fits for regular base light bulbs E26 Sockets. And the outlets are polarized, one slot is longer than another.
The outlet adaptor is not water resistant. If you want to use in outside to give extra outlets for cord Christmas string light or device with AC plug ,keep the outlet adapter covered/dry (like on a covered front porch in porch light socket, Covered floodlight socket ,ect).
This adapter only works with two pronged devices(no ground.NOT GOOD FOR 3 PRONG devices.)
Note:
-The pull chain switch controls the screw-in light bulb.The two outlets are “always on”.
-For your safety use, do not exceed the electrical ratings for the outlets at 125VAC and 660W and switch/lamp holder at 125VAC, 250W.
Specs:
Max Wattage / Voltage for outlets: 660W / 125V ( Recommended the amperage of all your combined devices is less than 5 amps )
Max Wattage / Voltage for socket extender: 250W / 125V
Length of the pull chain: 5 inch
Package:
-3 X Black Outlet Socket Adapter
9. Legrand – Pass & Seymour S865WCC18 Plastic Ceiling Lamp Holder 250-volt 250Watt Easy Install, White
Conclusion
By our suggestions above, we hope that you can found Ge Socket Adapter Pull Chain for you.Please don’t forget to share your experience by comment in this post. Thank you!