
We spent many hours on research to finding dewalt crosscut guide, reading product features, product specifications for this guide. For those of you who wish to the best dewalt crosscut guide, you should not miss this article. dewalt crosscut guide coming in a variety of types but also different price range. The following is the top 10 dewalt crosscut guide by our suggestions
512 reviews analysed
1. DEWALT DWS5100 12-Inch Dual-Port Folding Rip Guide
Feature
- 12-inch Ripping Capacity on Left Side for common rips such as stair treads and risers
- Up to 14 1/2-inch Ripping Capacity on Right Side for maximum width rip cuts
- Lightweight and durable aluminum construction for portability and strength
- Folds down to 19-inch long by 3-inch wide for easy storage
- Permanently laser-etched markings for accurate and fast setting
Description
Product description
The DWS5100 12 in. Dual-Port Rip Guide has a 12 in. rip capacity on left side for common rips including stair treads and risers. Features up to 14-1/3 in. rip capacity on right side for maximum width rips. Lightweight and durable aluminum construction and ability to store compactly provide portability. Includes: 2 Installation Screws.
From the Manufacturer
Dewalt DWS5100 12-Inch Dual-Port Folding Rip Guide is a circular saw attachment. It has a 12-Inch ripping capacity on the left side for common rips such as stair treads and risers, and up to a 14-1/2-Inch ripping capacity on the right side for maximum width rip cuts. The DWS5100 is equipped with a lightweight and durable aluminum construction for portability and strength, and can fold down to 19-Inches long by 3-Inches wide for easy storage. It features permanently laser-etched markings for accurate and fast setting. Specs: Max Rip Width Left Side – 12-Inches; Max Rip Width Right Side – 14-1/2-Inches; Minimum Rip Width – 1/2-Inch; Folded Length – 19-Inches; Folded Width – 3-Inches; Folded Height – 1-Inch; Weight – 1.2 pounds.
2. Kreg KMA2685 Circular Saw Guide
Feature
- Make rip cuts and crosscuts up to 24″ wide
- Cut multiple pieces to the same size with just one setup
- Use the oversize edge guide for precise control throughout the cut
- Eliminate need for marking, measuring, and layout lines
- Take your saw to the material instead of having to take your material to the saw
Description
TURN AN ORDINARY CIRCULAR SAW INTO A PRECISION EDGE-GUIDED CUTTING TOOL
Great projects start with high-quality cuts, and you can make those cuts—more easily than you ever imagined—using your circular saw plus the Rip-Cut Circular Saw Edge Guide.
The Kreg Rip-Cut turns your circular saw into a precision edge-guided cutting tool that makes straight, accurate, repeatable cuts in plywood, MDF, and other large sheets. With the Rip-Cut, you can cut with the confidence you want and the precision you need.
The Rip-Cut easily makes straight, accurate, repeatable cuts without measuring, marking, or having to keep the saw on the cut line. The Rip-Cut does this with a long edge guide that follows the straight edge of the sheet you are cutting. So, all you have to do is lock the saw in at the measurement you want—up to 24″—using the built-in measuring scale, and then make your cut.
With a built-in measuring scale, you don’t have to measure and mark each cut, either. Just lock the saw sled at your desired cut width, and you’re all set, whether you need to cut one piece or make multiple pieces of the exact same size. Plus, the Rip-Cut makes it easier to cut down large sheets by yourself.
The Rip-Cut is very easy to use. Simply mount your saw to the universal sled—it accepts most left-blade or right-blade saws—and then slide the sled onto the aluminum rail. After a simple one-time calibration, you can lock in your cut width (up to 24″) using the measuring scale and precision cursor. Then, just hold the edge guide against the edge of your sheet as you guide the saw. You’ll get straight, accurate, repeatable cuts easily every time.
3. DEWALT DWS780 12-Inch Double Bevel Sliding Compound Miter Saw, One Size
Feature
- New precise miter system
- Handle design for added portability
- 90 day money back guarantee
- Product does not include a stand
- Integrated XPS cross cut positioning system provides adjustment-free cut line indication
- Powerful 15 amp, 3,800 rpm motor delivers extended power and durability
- Exclusive Back Fence design cuts up to 2 by 16 dimensional lumber at 90-degrees, 2 by 12 at 45 degrees
- Adjustable stainless steel miter detent plate with 10 positive stops improves productivity, ensures accuracy
- Super efficient dust collection system captures over 75-percent of dust generated
- This product does not come with a stand. 90° Cross-Cut Capacity (Max Width)-14 inch (16 inch w/ special setup). 45° Miter Cut Capacity (Max Width)- 4×8
Description
Product Description
The DEWALT 12″ Double Bevel Compound Miter Saw is powered by a 15A 3,600 RPM and offers a new precise miter system and machined base fence support for optimal accuracy. Features a new handle design for maximum portability, cam lock miter, detent override, bevel crown stops and is best in class capacity. Constructed for easy, hassle-free use saw’s capacities are miter 0 to 60 degree left, 0 to 50 degree right, bevel 0 to 48 degree left and right, cross cuts 2 x 14 on 90 degree and miters 2 x 10 on 45 degree, base capacity 6-1/2″ left and right with a crown capacity of 6-5/8″. Carbide blade, dust bag, wrench and manual, 90 day money back guarantee, one year service, three year limited warranty and accessory DW7187 adjustable miter saw laser system included. Weighs 54 pounds.
Amazon.com
The DEWALT DWS780 12-inch double bevel sliding compound miter saw expertly walks the line between the rugged durability and fine precision that professionals need on the job site. From delicate woodworking to heavy-duty framing and deck building, the DWS780 provides the accuracy, capacity, and portability that cabinetmakers, trim carpenters, framers, installers, and contractors need.
Precise Cutting Without Recalibration
The DWS780 miter saw features extremely solid construction and the new XPS cross-cut alignment system that features an improved ultra-bright LED light, which casts a laser-like shadow on the work surface and shows the user precisely where the blade will come in contact with the material. This unique alignment system requires no recalibration over time or after changing blades, which makes it more accurate and durable than traditional laser guides.
Ultimate Durability
The DWS780 miter saw’s rugged guards; precision-machined castings, fences, and bevel system; and tough stainless steel miter detent plate are designed to withstand the constant rigors of the job site.
High-Capacity Cutting
The saw features a powerful 15-amp motor that delivers 3,800 RPM. For convenience, the power cord is routed through the rail in the back, eliminating interference with the slide. Additionally, the saw offers an industry-leading combination of cut capacities, which includes 6-3/4-inch vertical capacity, 7-1/2-inch nested crown capacity, 13-7/8-inch horizontal capacity, and exclusive back fence design that cuts up to a 2×16 at a 90-degree angle and 2×12 at a 45-degree angle. To simplify and maximize vertical cutting capacity, the unit includes a rail lock latch for holding the head away from the fence.
Hassle-Free Operation
The dual bevel system is easy to see and use in job site conditions thanks to its high-visibility scale and easy angle adjustment. Bevel from zero to 49 degrees with positive stops at 0 degrees, 22.5 degrees, 33.9 degrees, 45 degrees, and 49 degrees in both right and left directions. The saw also miters 60 degrees to the right and 50 degrees to the left and features an adjustable miter detent plate with 10 positive stops. A cam lock miter button allows the user to lock angles between detents. A miter detent override is also used to allow precise angle adjustment without falling into detents.
What’s in the Box
One DEWALT DWS780 12-inch double bevel sliding compound miter saw, one carbide blade, one blade wrench, one dust bag, and one vertical material clamp.
4. DeWalt Replacement DW745 Table Saw Miter Gauge # 5140032-78
Description
DeWalt 5140032-78 Replacement Table Saw Miter Gauge
This part is compatible with the following machines:
DeWALTDW745 Type 1 Table SawDW745 Type 1 Table SawDW745 Type 2 Table SawDW745 Type 2 Table SawDWE7480 (Type 1) 10″ Compact Job Site Table SawDWE7480 (Type 1) 10″ Compact Job Site Table SawDW745 (Type 3) 10″ Table SawDW745 (Type 3) 10″ Table Saw
5. DEWALT DWS779 12" Sliding Compound Miter Saw
Description
The DEWALT DWS779 12″ Sliding compound Miter saw features a powerful 15 amp, 3, 800 RPM motor that delivers extended power and durability. It has a super efficient dust collection system that captures over 75% of dust generated. This miter saw also offers an exclusive back fence design which cuts up to 2×16 dimensional lumber at 90° and 2×12 at 45°.
6. DEWALT DWS716XPS 15-Amp 12" Double Bevel Compound Miter Saw with Xps Cutline
Feature
- POWER AND DURABILITY: 15 amp, 3,800 rpm motor
- INTEGRATED XPS CUT LINE positioning system with LED light provides adjustment free cut line indication
- MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops
- MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents
- EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts
- CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°
- DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material
- HIGH VISIBILITY BEVEL SCALE that makes bevel adjustments fast and easy
- 0-50 degrees left and right miter capacity for greater versatility
- OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity
- Precise miter system and machined-base fence support optimized cutting accuracy
- LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability
7. DEWALT DWS715 15-Amp 12" Single Bevel Compound Miter Saw
Feature
- Stainless steel miter detent plate with 14 positive stops
- Tall sliding fence supports 5-1/2 in. Base vertically
- Precise miter system and machined base fence support
- Bevels 0° – 48° to the left and 0°- 3° to the right
- 2 in. X 8 in. Dimensional lumber cross cut capacity at 90° and 2 in. X 6 in. Dimensional lumber at 45°
Description
The DW715 12 in. Single-bevel compound Miter saw is powered by a 15 amp motor to drive 4, 000 RPM, delivering Extended power and durability. Features stainless steel Miter detent plate and cam Miter Lock that provide repeatable accuracy and durability with easy adjustments. Tall sliding fences support 5-1/2 in. Of base molding vertically and 5-1/2 in. Of crown molding vertically nested. Lightweight design and built-in carry handle for portability.
8. DEWALT DW3278 Circular Saw Rip Fence
Description
Product Description
For accurate ripping without penciling problems. For use with all DeWalt circular saws.
Amazon.com
Simply fasten the DW3278 circular rip fence to your DEWALT saw for smooth, precise results. Compatible with most DEWALT saws, as well as most 7-1/4-inch to 8-1/4-inch DEWALT and Black & Decker circular saws, this fence is simple to fasten and designate distance from blade to fence. Attaching is easy by inserting through slots at front of shoe and tightening the screw. It’s ruggedly crafted from all metal for long life and industrial graded. Included with the fence is a rip guide.
9. DEWALT DW715 15-Amp 12-Inch Single-Bevel Compound Miter Saw (Discontinued)
Feature
- Includes: a carbide blade, dust bag, blade wrench and comfortable side handles in the base
- Miter detent override that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents
- Adjustable stainless steel miter detent plate with 11 positive stops
- Tall sliding fences that support crown moulding up to 5-1/4-Inch. nested and base moulding up to 6-1/2-Inch vertically against the fence while easily sliding out of the way for bevel cuts
- Crosscut capacity up to 2×8-Inch dimensional lumber
- Bevels to the left up to 48° and to the right up to 3°, with positive stops at 0°, 45° and 33.9° for cutting crown moulding laying flat
- 4 hardened steel bevel stops at 0°, 33.9°, 45° and 48° that delivers versatility at most common bevel angles
- Cam lock miter handle with miter detent override that eliminates the need to twist the handle to lock in on the angle
Description
Product Description
Adjustable stainless steel Miter detent plate with 11-positive stops delivers repeatable accuracy and worksite durability. Tall sliding fence supports crown molding up to 5-1/4" nested and base molding up to 6-1/2" vertically against the fence while easily sliding out of the way for bevel cuts. 0-48 degree to the left and 0-3 degree to the right for increased capacity. 0-50 degree left and right Miter capacity for greater versatility. Cam lock Miter handle with miter detent override deliver Quick, accurate Miter angles. Hardened steel bevel stops at 0, 33.9, 45 and 48 degrees. Lightweight with built-in carry handle for easy portability. Standard equipment: carbide blade, extension kit, dust bag, blade wrench. Specifications: 15.0 amps, 4, 000 RPM No load speed, 12" blade diameter, 5/8 or 1" Arbor size, 6-1/2" vertical capacity baseboard against fence, 5-1/4" vertical capacity crown molding vertically nested, 8" horizontal capacity baseboard lying flat, 6-1/2" horizontal capacity crown molding lying flat, 2 x 8" for 45 degree bevel cut capacity (dimensional lumber), 2 x 8" for 90 degree cross-cut capacity (dimensional lumber), 2 x 8" Max width for 90 degree cross-cut capacity, 4 x 6" dimensional lumber Max height for 45 degree miter cut capacity, 2 x 6 dimensional lumber Max width for 45 degree miter cut capacity, 42 lbs. Tool weight. 15 amp motor, 4, 000 RPM delivers extended power and durability. Stand not included.
Amazon.com
Whether you’re cutting baseboards or crown molding, the DEWALT 12-Inch Single-Bevel Compound Miter Saw provides quick, accurate cuts for the job. Thanks to a powerful motor and convenient features, this compound miter saw is ready for a range of crosscutting and miter-cutting applications. In addition, it comes with a durable carbide blade, a blade wrench, and a convenient dust bag.
Smart, Powerful Design for Quick, Accurate Cuts
This DEWALT single-bevel compound miter saw’s 12-inch blade is backed by a powerful and dependable 15 amp motor. Offering a no-load speed of 4,000 rpm, it makes quick work of cutting framing or molding, as well as other crosscutting and miter-cutting jobs.
This sturdy saw is designed to deliver both a versatile setup and excellent accuracy to handle a variety of applications. The precise miter system’s adjustable stainless steel miter detent plate features 11 positive stops for easy setup and improved productivity. An easy-to-adjust cam-lock miter handle delivers quick and accurate miter angles, as well as allowing for detent override–which allows you to adjust the miter setting without the saw slipping into the miter detents. The saw’s wide miter capacity–0 to 50 degrees to the left and the right–adds versatility.
In addition, a tall fence supports 5-1/4-inch crown molding nested vertically, as well as 6-1/2-inch base molding set vertically against the fence. This fence slides out of the way easily when it’s time to make bevel cuts.
Increased Bevel Capacity and Convenient Stops
This DEWALT saw is designed to deliver quick, accurate bevel cuts. Ideal for a range of applications, the saw can deliver clean, 45-degree bevel cuts through dimensional lumber that measures up to 2 by 8 inches.
It also allows you to setup for bevel cuts that measure between 0 degrees and 48 degrees to the left and bevels that measure between 0 degrees and 3 degrees to the right, providing increased capacity for big jobs. Plus, with hardened steel bevel stops at 0, 33.9, 45 and 48 degrees, this saw delivers versatility and makes finding and setting the most common bevel angles a quick and easy process.
Portable and Easy To Transport
This lightweight compound miter saw weighs just 42 pounds and features a built-in carry handle, so you can move it around the jobsite easily and lift it comfortably when it comes time to stow the saw at the end of the day.
This 12-inch single-bevel compound miter saw also comes with a DEWALT warranty package that includes a three-year limited warranty, a one-year free service contract, and a 90-day money back guarantee.
What’s in the Box
DEWALT 12-Inch Single-Bevel Compound Miter Saw, carbide blade, dust bag, and blade wrench.
10. DEWALT Miter Saw, Double-Bevel, Compound, 12-Inch, 15-Amp (DWS716)
Feature
- POWER AND DURABILITY: 15 amp, 3,800 rpm motor
- MITER DETENT PLATE IMPROVES PRODUCTIVITY AND ENSURES CUTTING ACCURACY: Adjustable stainless steel miter detent plate with 14 positive stops
- MITER DENTENT OVERRIDE that allows you to override the miter stops and adjust to the desired setting without the saw slipping into the miter detents
- EASIER BEVEL CUTS: Tall sliding fences support crown molding up to 6-5/8-inch nested and base molding up to 6-1/2-inch vertically against the fence while easily sliding out of the way for bevel cuts
- CROSS CUT CAPACITY up to 2×8-Inch dimensional lumber at 90° and a 2×6-Inch dimensional lumber at 45°
- DOUBLE BEVEL DESIGN: Double bevel design allows saw to bevel left and right 0 – 48 degree with positive stops at 0, 33.9, 45, and 48 degrees both left and right allowing user to flip the saw not the material
- OPTIMIZED CUTTING ACCURACY: Innovative gearbox and belt-drive design increases vertical cutting capacity. Precise miter system and machined-base fence support optimized cutting accuracy
- LIGHTWEIGHT & PORTABLE: Lightweight design, head lock-down pin, and built-in carry handle for portability
- INCLUDES carbide blade, blade wrench, dust bag, vertical clamp and comfortable side handles in the base
Description
The 12 in. Double-bevel compound Miter saw is powered by a 15 amp motor that drives 3, 800 RPM to deliver extended power and durability. This saw features a stainless-steel Miter detent plate with 14 positive stops and cam Miter Lock system that provides repeatable accuracy and durability with easy adjustments. Tall sliding fences support 6-1/2 in. Of base molding vertically and 6-5/8 in. Of crown molding vertically nested. High-efficiency dust duct is concentrated at the point of cut for maximum Collection. The lightweight design and built-in carry handle provide portability.
Conclusion
By our suggestions above, we hope that you can found Dewalt Crosscut Guide for you.Please don’t forget to share your experience by comment in this post. Thank you!