Top 8 Custom Dynamics Genesis Taillight

OE replacement Tail Light Assembly (lens, housing, socket, and bulb).

ProBEAM LED Taillights have been engineered from the ground up using the highest quality automotive LEDs and modern light pipe design! Custom Dynamics premium line of aftermarket LED taillights now provides increased side visibility to maximize safety through modern technology for Harley-Davidson motorcycles. 5 light pipes illuminate across the taillight as the constant on running light, while 25 separate LEDs provide a full contrast brake light. The Low-Profile design protrudes only two inches from the stock taillight baseplate for a sleek custom look on your rear fender. Available in Red (ECE Compliant) or Smoke, with top or bottom license plate illumination window, or with no window. Replacement gasket and nylon washers included for plug and play installation. Lifetime warranty against LED failure. Simple plug and play installation for most 1999-2020 Harley-Davidson models (including TriGlide) equipped with a OEM Squareback Taillight (68245-03). Note: Does NOT fit HDI (International Model) 2020 TriGlide CVO. Plug and play Taillight Adapter (sold separately) required for installation on US model 2020 Harley-Davidson TriGlide CVO (FLHTCUTGSE). 1999 and earlier models must use a Pre-1999 Taillight Baseplate Kit to install newer ProBEAM taillights on earlier models. Custom Dynamics recommends all 2001-2002 CVO Dyna Wide Glide, 1999-2008 Dyna Wide Glide (FXDWG), 2008-2013 Dyna Fat Bob (FXDF), 1999-2009 Softail Night Train (FXSTB), 2008-2011 Softail Cross Bones (FLSTSB), 1999-2010 Softail Custom (FXSTC), 1999-2007 Softail Standard (FXST), 1999-2006 Springer Softail (FXSTS), 2015-2019 Freewheeler, 2009-2012 XR1200 & XR1200X use Custom Dynamics Squareback style taillight as models with a “bobbed” style fender require the taillight to mount inverted. Replacement for OEM Part 68245-03. US Patents: D807545, D807546, D808050. China Patent: ZL201730257957.9

ProBEAM LED Taillights have been engineered from the ground up using the highest quality automotive LEDs and modern light pipe design! Custom Dynamics premium line of aftermarket LED taillights now provides increased side visibility to maximize safety through modern technology for Harley-Davidson motorcycles. 5 light pipes illuminate across the taillight as the constant on running light, while 25 separate LEDs provide a full contrast brake light. The classic Squareback design mimics the look of the stock taillight and mounts to the stock taillight baseplate to add a modern look to your rear fender. Available in Red or Smoke, with or without top license plate illumination window. Replacement gasket and nylon washers included for plug and play installation. Lifetime warranty against LED failure.   Simple plug and play installation for all 1999-2020 Harley-Davidson models (including TriGlide and Freewheeler) equipped with a OEM Squareback Taillight (68245-03). Low Profile lens design also available for most models.  Replacement for OEM Part 68245-03 US Patents: D807545, D807546, D808050.  China Patent: ZL201730257957.12

• 10-user selectable flash/strobe patterns• Over-current/thermal/short circuit/reverse wiring protection• 84W, 12V system• Sealed weather-tight case• Applies brake flash/strobe pattern to center run/brake portion of stock LED Tour-Pak; and left and right side sections if BCM has been programmed to provide brake on the sides of the Tour-Pak• 2-1/4″ L x 1-1/4″ W x 5″ H

Fits 1999-2016 Harley-Davidson models with squareback-style taillight. Available in chrome or black. Made in the U.S.A.

Feature 12 super-bright LEDs. 3M double-sided tape for easy mounting. Work with any 12VDC system with no load equalizer or resistors required. Non-sequential light bars are dual-intensity and you have a choice of flashing or non-flashing brake alert. Sequential light bar features “Knight Rider” side-to-side sequencing in running light mode and a flashing brake alert. Sequential LED turn signal light bars will work with flashers that flash between 60-120 times per second (the standard DOT rate); perfect for auxiliary turn signals; single intensity, does not provide a running light. Sold each.

36 super-bright for Genesis LEDs for unmatched brightness.
Contoured chrome housing.
Can be used a third brake light, additional running light or dual-intensith running/brake lights with optional dual converter.

This item fits the following vehicle applications:
for Can-Am Spyder RT (SE5) 2010-2011
for Can-Am Spyder RT (SE5) Audio/Convenience 2010-2012
for Can-Am Spyder RT (SM5) 2010-2012
for Can-Am Spyder RT (SM5) Audio/Convenience 2010-2012
for Can-Am Spyder RT Limited (SE5) 2010-2012
for Can-Am Spyder RT-S (SE5) 2012
for Can-Am Spyder RT-S (SM5) 2012