Top 9 Commercial Vacuum Replacement Hose

Feature

• Fits the friction fit models only. If your model twist on and locks then this is not the correct hose.

Feature

• Replacement Shark Vacuum Hose Fits Shark Rotator Professional Lift Away Models
• NV500, NV500C, NV500CO, NV500Q, NV500W, NV500WC, NV500WTV, NV501, NV502, NV504, NV504Q, NV505, NV510, NV520, NV520Q, NV520QPR, NV552, UV560, UV561, UV561Q, V32915
• The Handle Is White And Burgundy As On The Picture
• Replaces Shark Part Number 1245FC500
• High Quality Full Money Back Guarantee on Size, Fit, and Quality

Feature

Feature

• 1. 25″ diameter X 16 foot commercial grade vacuum hose to connect from all major brands of home shop vacuums to a wide range of power tools with 1. 00″ and 1. 50″ internal and external connections for dust collection
• The highly flexible commercial grade vacuum hose has a smooth interior to resist clogging with large profile debris while supplying superior airflow. Airflow to the tool can be modified as necessary for suction control using a swivel air relief feature built into bayonet fitting
• Comes with quick click system for connecting to the exhaust port on all major brands of hand held and stationary power tools. A collar with clip ring, a bayonet fitting with a 1″ soft TPE fitting, and a second bayonet with a soft 1. 50″ TPE fitting are designed to accept and hold exhaust ports designed to fit the hose internally or externally as demanded by the power tools design. Changing from one end fitting to the other takes a few seconds and offers a smooth 360 degree swivel connection to prevent the hose from kinking or restricting movement of the power tool
• The soft molded TPE fitting measures 1. 00″ on the inner diameter and has four concentric rings to hold firmly to the power tool. For power tools with a female connection the 1. 00″ soft TPE part measures 1. 40″ on the outer diameter. The soft rubber like feel and taper of the fitting insures a positive tool forming fit
• Includes a second bayonet with a soft molded TPE fitting that measures 1. 50″ on the inner diameter with three concentric rings to hold firmly to the power tool even when carrying a substantial flow of debris in the air stream. The fitting measure 1. 90″ on the outer diameter. The soft TPE allows the fitting to form to the shape of the exhaust port off of the selected power tool
• The inner collar and acetal clip ring are designed to fit to tools directly that accept a quick click collar connection. The collar connector is 1. 75″ on the outer diameter with the acetal clip designed to snap into place on power tools fitted for this feature
• Designed to fit all major brands of power tools and work shrouds including Skil Bosch, Ryobi, Makita, Dewalt, Festool. Fein, Kobalt, Porter Cable, Hitachi and Milwaukee Electric
• The tank end is designed to fit all major brands of home shop vacuums including Shop Vac, Vacmaster, Ridgid, Craftsman, Dewalt, John Deere, as well as many private brands typical of the 2. 5″ vacuum connection

Feature

• Canister vacuum cleaner with shoulder strap and integrated handle for portability
• 4-amp, two-stage bypass motor is more powerful than typical flow-through motors and has a greater vacuuming capability than single-stage motors
• Adjustable extension wand and 4-foot hose help facilitate cleaning overhead vents, ceiling fans, and other high places. Surface Area- Upholstery, Stairs, Carpet, Hard Surfaces, Edges and Small Spaces
• 30-foot power cord enables the vacuum to cover larger area without changing outlets than vacuums with shorter cords
• Measures 8 x 6 x 15 inches (H x W x D)
• weighs 5 pounds
• has 1-quart capacity

Feature

• Upright vacuum cleaner with 12-inch-wide cleaning path is better suited for cleaning low pile carpets than typical canister vacuum cleaners and takes up less space for storage
• Helping Hand handle has received Ease-of-Use Commendation from Arthritis Foundation
• on/off switch is located in handgrip for convenience
• Automatic floor adjustment enables the vacuum cleaner to move between carpets and hard surfaces without changes to manual settings
• Powerful, high-speed, balanced brush roll with double helix brushes whirls at 6,500 RPM and move debris toward the vacuum inlet for cleaning
• Measures 6 x 13 x 35 inches (H x W x D)
• weighs 8.2 pounds

Feature

• 1 PACK VACUUM HOSE REPLACEMENTS COMPATIBLE WITH Eureka vacuum cleaners. Black hose for Eureka vacuums part 60289-1 is essential for premium, deep cleaning across any surface. The suction collects fine dust particles and allergens, preventing them from recirculating into the air. Allergy sufferers, replacing the vacuum hose is necessary to maximize the vacuum cleaning power. This helps to ensure clean air and improve vacuum suction quality
• CLEAN AND HEALTHY LIFESTYLE: Compatible with Eureka vacuum hoses for models 3670A, 3670B, 3670D, 3670E, 3670F-1, 3670F, 3672A, 3672B-1, 3676B , should help clean surfaces. Our vacuum hose replacement part ensures deeper and cleaner surfaces. Have confidence with a refreshing, clear feeling for a home, house, office, apartment, condo, high-rise, large or small tower, while using the ozone.
• SIMPLE AND EASY TO INSTALL: Switch out in less than five (5) minutes, providing time efficiency. Price and quality filters that work well. Get back to daily activity quickly and make a big difference with air quality in the process. Simply remove the older and dirty hose and replace. Our hose fits well with Eurka vacuum cleaners. The hose easily winds in any direction. Enjoy clean, fresh air, reducing allergies, pet dander, asthma, allergy pollen, and allergens with every twist and turn.
• LONG LASTING REPLACEMENT VACUUM HOSE: The hose is washable and reusable ensuring long life. Replace the Eureka hose every 6 to 12 months for optimal performance or one (1) to two (2) times per year depending upon usage. When a clogged, dirty or torn hose isn’t changed, it can cause the vacuum to work harder and impact utility bills. We deliver high quality, durable and long lasting replacements. They are an efficient investment. Easy to maintain for the long run.
• THINK CRUCIAL manufactures premium vacuum cleaner hoses and air purifier replacement kit parts. We stand behind the quality and workmanship of all our products. We maintain a thorough quality control process to ensure compatibility with the Eureka vacuum cleaner hose models and parts listed above.

Feature

• HIGH-QUALITY HOSE: Crush-proof, low-voltage vacuum hose springs back to its original shape after use for easy storage
• DURABLE: Vinyl reinforced construction with a dark gray finish provides long lasting use
• EASY TO USE: Features an on/off switch to simplify controls – making it easy for everyone to use!
• UNIVERSAL: Includes patent-pending universal hose end which fits all Broan-NuTone vacuums and most other standard inlets for your convenience
• IDEAL SIZE: Vacuum hose measures 30-feet in length and has a 1.38″ inner hose diameter to make cleaning easy!

Feature

• 1-7/8″ diameter hose reaches 7′ & adapts to most 1-7/8″ inlets
• Included adaptor pairs 1-7/8″ hose to 1-1/4″ accessories
• Locking tab on hose cuff provides secure connection to the vac
• Packaging may vary