
781 reviews analysed
1. G1/4 Pressure Transducer Sensor, Input 5V Output 0.5-4.5V / 0-5V Pressure Transmitter for Water Gas Oil(0-10PSI)
Feature
- [Full voltage protection]:With stainless steel body, provides complete surge voltage protection.
- [Stable and reliable]:This pressure transducer adopt precision compensation technology and sensitive components, stable and reliable.
- [Widely use]:Widely used in oil tank, gas tank and diesel tank to detect oil, fuel, diesel, gas and water.
- [Easy to operate]:Lightweight and compact, easy to install and operate.
- [Note]:0.5%FS small output error, including nonlinear, hysteresis error and repeatability.
Description
Description:
This G1/4 pressure transducer sensor is widely used in oil tank, gas tank and diesel tank to detect oil, fuel, diesel, gas and water. It adopts precision compensation technology and sensitive components, stable and reliable. Stainless steel body, it has complete surge voltage protection function. Small and compact, easy to install and operate.
Specification:
Material: Stainless steel
Output Signal Type: Analog sensor
Accuracy: 1%FS
Thread: G1/4inch
Wire: Red: power, black: ground, green: signal
Size: Shown as picture
Weight: Approx. 74g/2.6oz
Pressure Range
(Optional)
Output Signal Power Supply 0-10PSI 0.5–4.5V/0–5V, 0-30PSI 0.5–4.5V/0–5V, 0-80PSI 0.5–4.5V/0–5V, 0-100PSI 0.5–4.5V/0–5V, 0-150PSI 0.5–4.5V/0–5V, 0-200PSI 0.5–4.5V/0–5V, 0-300PSI 0.5–4.5V/0–5V, 0-500PSI 0.5–4.5V/0–5V
Package List:
1 × Pressure Transducer
2. Fluke PV350 Pressure/Vacuum Transducer Module, 500 psi Pressure
3. Nextech DFS200 (200N/44lbf/20kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures
Feature
- Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode. 500 reading can be recorded on internal memory for later viewing or download.
- Made in Thailand. Power adapter/charger input 100-240 volts AC.
- M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32″(M5) & 4x M3 mountable threaded holes.
- Latest version PC Software ‘NexGraph’ Plot Time vs Force, free downloadable from our web site www.forcetorque.com Power by internal rechargeable NiMH battery pack or directly from wall plug charger.
- Complete set include plastic case, charger, USB cable, printed manual, 3 brass plated accessories (sharp point, hook & compression plate) Calibration Certificate included
Description
DFS-Series digital force gauges are cost-effective tension and compression Peak Hold?Track measurement and testing tools. Metal housings with large back-lit graphics LCD, these units fit well in your hand. The display can be inverted, for a viewing that suit your testing position. Internal rechargeable NiMH Battery pack provide many hours of using. Various units of measurement can be toggled by one simple key. Three modes of operation are easily selectable: Track mode displays live readings, Peak Compression and Peak Tension mode records the maximum reading sensed during the test. The gauge is ready to work without any setup. For more advance setup, plain English language menu provide for simple setup of the instrument to your requirements. In Pass/Fail mode, programmable limits provide visual and audible indication if a test passes or fails. An analog bar graph provides perspective of current reading in comparison to the full scale range. The instruments can log up to 500 readings at the push of a button. The data can be later viewed on screen, or sent to a computer through USB port. An easy to setup free windows based software, with USB cable, are provided. DFS-Series Gauge suit both basic as well as professional application.
4. Nextech DFS500 (500N/110lbf/50kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures
Feature
- Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode. M6 Threaded Rod attachment to Load.
- Made in Thailand. Power adapter/charger input 100-240 volts AC. Powered by charger or internal NiMH rechargable battery. Connect to PC using USB port for data plot or download.500 reading can be recorded on internal memory for later viewing or download.
- Menu driven, digital graphic LCD display with white back light. Mode available: Peak, Track, Re-Calibration,Memory page. M6 Threaded Rod attachment to Load. Metal Enclosures with 2x 10-32″(M5) & 4x M3 mountable threaded holes.
- Latest version PC Software ‘NexGraph’ Plot Time vs Force, free downloadable from our web site www.forcetorque.com Power by internal rechargeable NiMH battery pack or directly from wall plug charger.
- Complete set include plastic case, 100-240 volts US Plug charger, USB cable, printed manual, 3x brass plated accessories (sharp point, hook & compression plate). Factory’s calibration certificate included
5. Nextech DFS1000 (1000N/220lbf/100kgf) Digital Force Gauge, Push Pull Gauge, Peak/Track Mode, Invert Display, Pass/Fail LED, USB Output, Back-Lit Graphic LCD, Metal Enclosures
Feature
- Accuracy 0.2% or better of FS (Full Capacity). Hold Peak Tension or Compression load reading until reset. Peak or Track Mode. 500 reading can be recorded on internal memory for later viewing or download.
- Made in Thailand. Power adapter/charger input 100-240 volts AC.
- M6 Threaded Rod attachment to Load. Menu driven, digital graphic LCD display with white back light. Metal Enclosures with 2x 10-32″(M5) & 4x M3 mountable threaded holes.
- Latest version PC Software ‘NexGraph’ Plot Time vs Force, free downloadable from our web site www.forcetorque.com Power by internal rechargeable NiMH battery pack or directly from wall plug charger.
- Complete set include plastic case, charger, USB cable, printed manual, 3 brass plated accessories (sharp point, hook & compression plate). Calibration Certificate included.
6. Accessory Set for Nextech Force Gauge // Handle (Acc-Set)
Description
Accessory kit for Nextech Force Gauge DFS-Series & DFT-series Force Gauge.
7. Nextech DFS-X500 (500N/110lbf/50kgf) Digital Force Gauge with External S-Beam Load Cell, Peak/Track Mode, Pass/Fail LED,USB Output, Back-Lit Graphic LCD,Metal Enclosure
Feature
- Made in Thailand. Power adapter/charger input 100-240 volts AC. NiMH rechargeable battery pack inside. Load cell can be mount with single threaded hole on top or with two holes to the side. Please see drawing pictures for mounting instructions.
- Accuracy better than 0.2% of FS (Full Capactiy) for Capacity 5N-1000N model. And 0.5% of FS (Full Capacity) for 3,000N-20,000N model. Tension or Compression Load. Peak Hold or Track Mode., 500 reading can be recorded on internal memory, for later viewing or download. Two M12 thread ball bearing holder provided, to attached to Load Cell.
- Metal Enclosures with 2x 10-32″(M5) & 4x M3 mountable threaded holes. Power by internal rechargeable NiMH battery pack or directly from wall plug charger.
- Cable length between gauge and SBeam loadcell is 1 meter for 5N – 1000N and 2 meters(6.5 feet) for 3000N – 20,000N Capacity Model. Menu driven, digital graphic LCD display, with white back light. PC Software Graphic Plot Time/Force, latest version free downloadable from our web site www.forcetorque.com
- Complete set with carrying case, charger. For Capacity 3,000N-20,000N load cell with bearing holder are provided. on both end. Calibration Certificate included
Description
DFS-X-Series digital force gauges are cost-effective tension and compression testing tools. External transducer are great for application that has limited space of mounting to load and for remote viewing from the load. Metal housings with large back-lit graphics LCD, these units fit perfectly in your hand. The display can be inverted, for a viewing that suit your testing position. Unit of measurement can be toggled by one simple key. Three modes of operation are easily selectable: Track mode displays live readings, Peak Compression and Peak Tension mode records the maximum reading sensed during the test. The gauge is ready to work without any setup. For a little more advance setup, the plain English language menu provide for simple setup of the instrument to your requirements. In Pass/Fail mode, programmable limits provide visual and audible indication if a test passes or fails. An analog bar graph provides perspective of current reading in comparison to the full scale range. The instruments can log up to several hundred readings at the push of a button. The data can be later viewed on screen, or sent to a computer through USB port. An easy to setup free windows based software program, with USB cable, are provided. DFS-Series are available from 1.1 to 6,600 lb ranges, providing a large testing capacities for various applications. This is an advance force gauge that suit both simple and professional application.
8. Handle for Nextech DFS-Series Force Gauge
Description
Handle for Mounting to Nextech Brand ‘s DFS-Series Force Gauge. This handle improve grip when applying high force for push or pull test.
9. Nextech DFS-X10KN (10000N/2200lbf/1000kgf) Digital Force Gauge with External S-Beam Load Cell, Peak/Track Mode, Invert Display,Pass/Fail LED,USB Output, Back-Lit Graphic LCD,Metal Enclosure
Feature
- Made in Thailand. Power adapter/charger input 100-240 volts AC. NiMH rechargeable battery pack inside.
- Accuracy better than 1% of FS (Full Capactiy) for Capacity 5N-1000N model. And 0.5% of FS (Full Capacity) for 3,000N-20,000N model. Tension or Compression Load. Peak Hold or Track Mode., 500 reading can be recorded on internal memory, for later viewing or download. Two M12 thread ball bearing holder provided, to attached to Load Cell.
- Metal Enclosures. 2 bearing holder provided Power by internal rechargeable NiMH battery pack or directly from wall plug charger.
- Cable length between gauge and SBeam loadcell is 1 meter for 5N – 1000N and 2 meters(6.5 feet) for 3000N – 20,000N Capacity Model. Menu driven, digital graphic LCD display, with white back light. PC Software Graphic Plot Time/Force, latest version free downloadable from our web site www.forcetorque.com
- Complete set with carrying case, charger. For Capacity 3,000N-20,000N load cell with bearing holder are provided. on both end. Calibration Certificate included
Description
DFS-X-Series digital force gauges are cost-effective tension and compression testing tools. External transducer are great for application that has limited space of mounting to load and for remote viewing from the load. Metal housings with large back-lit graphics LCD, these units fit perfectly in your hand. The display can be inverted, for a viewing that suit your testing position. Unit of measurement can be toggled by one simple key. Three modes of operation are easily selectable: Track mode displays live readings, Peak Compression and Peak Tension mode records the maximum reading sensed during the test. The gauge is ready to work without any setup. For a little more advance setup, the plain English language menu provide for simple setup of the instrument to your requirements. In Pass/Fail mode, programmable limits provide visual and audible indication if a test passes or fails. An analog bar graph provides perspective of current reading in comparison to the full scale range. The instruments can log up to several hundred readings at the push of a button. The data can be later viewed on screen, or sent to a computer through USB port. An easy to setup free windows based software program, with USB cable, are provided. DFS-Series are available from 1.1 to 6,600 lb ranges, providing a large testing capacities for various applications. This is an advance force gauge that suit both simple and professional application.
10. 30-2130-150 150 PSIG Replacement Pressure Sensor 18-month warranty
Description
– Stainless Steel – 18-month warranty – Standard 3-pin weatherproof quick-disconnect connector – 150PSIG (other pressures available- phoenixsensors.com) – 1/8-inch NPT – P/N – PPT81-0-150G2 – , Equivalent P/N 30-2130-150 – -25-125C High Operating Temperature – US Manufacturer. 5 VDC source. .5-4.5V ratiometric output. 4V span. 150PSI range = 26.7mV/PSI or 37.5PSI/V
Conclusion
By our suggestions above, we hope that you can found Arduino Vacuum Gauge for you.Please don’t forget to share your experience by comment in this post. Thank you!