The Best 7 Hp Outboard Motor

Hydro-stabilizer 9401-7 gives outboards and sterndrives a performance boost, improving both stability and handling. The hydro-stabilizer out-performs ordinary flat hydrofoils by reducing drag when the hull goes on Plane. Wings constructed of engineered Resin. The hydro-stabilizer quickly puts the boat on Plane and helps pull skiers out of the hole faster. Even at lower RPMs, it keeps the boat on Plane. Attwood develops high value, engineered marine products to make life on the water easier to enjoy. Made to meet the demands of boat builders and distribution partners, our products are extensively tested on-site in our lab to provide worry-free boating under all conditions.

Genuine Yamaha protection. Durable, fade-resistant, 600-denier, solution-dyed, polyester covers are emblazoned with Yamaha graphics. Fits F80, F75, F90, F100, F115 motors.

Water Pump Impeller for Nissan Tohatsu Outboards 9.9HP-15HP-18HP-20HP Boat Motor Engine Parts Replacement Honda Outboards 7.5-10-75-100 HP 19210-935-003 19210-935-A01. 

Cross Reference: 334-65021-0 334650210M 334650210.

It replaces Sierra Marine Outboards P/N: 18-8921.

Specification:

Material: Neoprene and Plastic

Number of Blades: 8

Shaft Diameter: 0.550 inch

Overall Diameter: 1.622 inch

Impeller Height: 0.937 inch

Net Weight : 20 g

Applications:

Fit the following 2,4 stroke Nissan Tohatsu Outboard Engine:

4 stroke : F18B2 F15B2 F9.9B2 F20C F15C F9.9C MFS9.9C MFS15C MFS20C

2 stroke : 18E2 15D2 9.9D, M9.9D2 M15D2 M18E2 M16A2 M20A2 M25A2

9.9 (All), 15 (All), 18 (All), 9.9 4-Stroke (All B Models), 15 4-Stroke (All B Models), 18 4-Stroke(All)

Fits Honda Outboard Motors engine by year and model: 

Water Pump Impeller P/N Hub with key drive  19210-935-003 19210-935-A01 Replaces Sierra 18-8921

7.5HP Pre 1997 BF75, BF75Z, B75K1,B75K2,B75K3, 

10HP Pre 1997 BF100 BF100Z 

75HP 2007 & Later BF75Z 

100HP 2007& Later BF100Z 

Package Included:

1pc x Water Pump Impeller

NOTE:  

It is VERY IMPORTANT to Check your Outboard Engine Model, Horsepower or Year  before Purchase. If you have any questions please do not hesitate to ask.

Fit For:
1989-2001 2004-2009 Evinrude Outboard 40 hp
1989-1996 Evinrude Outboard 48 hp
1989-1990 Evinrude Outboard 50 hp

Original Equipment (OE) Number:
435532

Package Includes:
1 Tilt Trim Motor
UNIT TYPE: OMC OUTBOARD MARINE
VOLTAGE: 12
ROTATION: REVERSIBLE
FIELD HSG OD: 63.6MM / 2.504IN
OVERALL LENGTH: 124MM / 4.882IN
SHAFT OD: 8MM / 0.315IN
SHAFT NOTES: 5MM FEMALE HEX
NEW OR REMANUFACTURED: NEW
APPROXIMATE WEIGHT: 2.94 LBS / 1.34 KG
NOTES:
2-WIRE CONFIGURATION, FEMALE SPADE TERMINALS, (4) 7MM UNTHREADED MOUNTING HOLES
Working Principle:
When it’s time to install a tilt trim motor, you’ll notice one green and one blue wire on most models. The blue wire carries power to raise the engine, and the green wire carries power to lower the engine. Motors built for older-style systems may also have a black wire that serves as a ground. Newer style systems do not have this third wire
Function and Advantages::
Tilt trim motors smoothly raise and lower boat engines to the perfect angle for better on-the-water performance and fuel economy. They can also lift your engine upward to avoid damage when loading your boat on a trailer. Tilt trim motors make your days out on the water more enjoyable by giving you more control over how your boat performs. Our tilt trim motors are 12-volt direct current, reversing-style motors. We test our tilt trim motors on a professional test bench to ensure dependable performance

Package Contents:

6 X Bolt   

1 X Water Seal 

1 X Insert Cartridge 

1 X Wear Plate 

1 X Water Pump Gasket  

1 X Full Power Plus Impeller  

1 X O Ring 

1 X Pump Housing   

2 X Grommet  

1 X  Key Black

1 X Key White

1 X  Damper 

Applications may fit more than this Below : 

Note:Complete Water Pump Kit for a Johnson/Evinrude Outboard. It will fit (1986-2001) 65, 70, and 75 HP 3-cyl. 

loopcharged engines with the large gearcase. It’s the large pump with the plastic wedge key impeller. 

Brand   TYPE            HP                            YEAR

Johnson / Evinrude 3-Cylinder 60          1989-01

Johnson / Evinrude 3-Cylinder 60 4-stroke  1998-Up

Johnson / Evinrude 3-Cylinder 65          1979-01

Johnson / Evinrude 3-Cylinder 70          1979-94

Johnson / Evinrude 3-Cylinder 70 4-stroke  1998-Up

Johnson / Evinrude 3-Cylinder 75          1979-88

Water Pump Impeller replacement for Mercury Mariner 4/4.5/6/7.5/9.8 HP Boat Motor Engine Parts 47-89981. 

Cross Reference: 47-89981 47-65957 47-39074.

It replaces Sierra 18-3039.

Specification:

Material: Neoprene and Brass Hub

Number of Blades: 6

Impeller Height: 0.456 inch

Overall Diameter: 1.260 inch

Shaft Diameter: 0.567 inch

Net Weight : 10 g

Applications:

Water Pump Impeller for Mercury Mariner  2-stroke 4/4.5/6/7.5/9.8 HP Outboards Engine Boat Motor Parts. 

• 4hp45595532 and up
• 4.5hp454107220 – 5595531
• 4.5hp455595532 and up
• 6hp601916139 – 2193817
• 6hp602193818 – 2529894
• 6hp60J2385673 – 2387383
• 7.5hp752529895 – 4131609
• 7.5hp754131610 – 5226934
• 7.5hp7.55206550 and up
• 9.8hp1101865779 – 2196388
• 9.8hp1102196389 – 3795657
• 9.8hp1103795658 – 4126459
• 9.8hp1104126460 – 5206549
• 9.8hp9.85206550 and up

Package Included:

1pc x Water Pump Impeller

NOTE:

Mercury Outboard Engine Parts Used 2 Different Diameter Drive Shafts. 

This Impeller has an Internal Diameter of .456″  the distance across the hole in the center of the impeller.

If your impeller has an inside diameter of .438″, this is NOT the correct impeller for you. This impeller will not fit 5hp Mercury Mariner engines. 

If you need a Impeller with a .438″ Internal Diameter . Please see the other Impeller 47-89980 

It is VERY IMPORTANT to Check your Outboard Engine Model, Horsepower or Year  before Purchase. If you have any questions please do not hesitate to ask.

Water Pump Impeller 47-F436065-2 for Chrysler Force Sears Gamerfisher Outboard 9.9-10-12-15-20-25 HP Boat Motor Engine Parts replacement Sierra 18-8903. 

Cross Part Number Ref: 47-F436065-2 47-F436065-1 47F4360652 47F4360651 47-F4360652 47F436065-2 47-F4360651 47F436065-1 47-F436065 47F436065.

It replaces Sierra Marine 18-8903.

SPECIFICATION:

Material: Neoprene and Plastic Hub

Number of Blades: 6

Shaft Size: 0.508 inch

OD: 2.244 inch

Thickness: 0.594 inch

N.W : 20 g

APPLICATION:

Fits the following Chysler Force Outboards Boat Motor Engine Parts:

9.9hp 1979-1997

10hp 1974-1978

12hp 1979 

15hp 1974-1997 

20hp 1973-1978 

25HP 1975-1979

Fits the following Sears Gamefisher Outboards Boat Motor Engine Parts:

7.5HP 1988-1989

9.9HP 1988-1997

15HP 1986-1995

Package Included:

1 Piece x Water Pump Impeller

NOTE:  

It is VERY IMPORTANT to Check your Outboard Engine Model, P/N, Horsepower or Year before Purchase. If you have any questions please do not hesitate to ask.

Replace part number: 763758 778166

This water pump repair kit fits your Mercury F40‑60 4-stroke Bigfoot/Command Thrust outboard, 60 hp 2‑cycle BigFoot (serial number 0D000750 and above). It fits 75‑115 4-stroke outboards, 150 EFI 4-stroke outboards and 70‑90 hp 2‑cycle outboards (serial number 0A996142 and above). It fits 100‑125 Hp. 2‑cycle (4 cylinder) models having pump cover screws without insulators. It also fits V‑200/225/250 (3.0L) 2‑cycle outboards. This pump repair kit fits all 4-cylinder and 6-cylinder Verado (with 4.80 dia. torpedo gearcases) outboards. This versatile water pump repair kit also fits MerCruiser Alpha One Gen II drives (serial number 0D469859 and above). See your owner’s manual for replacement schedule. See your service manual for installation instructions. The Quicksilver brand is the leader in delivering uncompromising engine oils, parts and accessories to the marine industry for over 65 years.  Quicksilver is the premier supplier of Mercury Marine Original Equipment replacement engine parts, oils, and accessories, but also works to serve all Original Equipment brands in the marine and powersports industries.  It has earned a loyal following by providing the highest quality products that are tested through some of the most rigorous environments and testing procedures. No aftermarket company comes close to the level of research and design as Quicksilver; buying Quicksilver is buying performance, protection and peace of mind.