Finding your suitable readers for 4 hp electric motor is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best readers for 4 hp electric motor including detail information and customer reviews. Let’s find out which is your favorite one.
510 reviews analysed
1. Dayton 3/4 HP Direct Drive Blower Motor, Capacitor-Start, 1725 Nameplate RPM, 115/208-230 Voltage, Frame 56 – 4YU35
Description
Direct Drive Blower Motor, Motor Application HVAC/R, Motor Sub Application Direct Dr Fan/Blower, Motor Type Capacitor-Start, Enclosure Open Dripproof, HP 3/4, Nameplate RPM 1725, Voltage 115/208-230, Full Load Amps 10.6, Hz 60, Phase 1, Frame 56, Service Factor 1.25, Max. Ambient Temp. 40 Degrees C, Insulation Class B, Duty Continuous Air Over, Number of Speeds 1, Mounting Cradle/Stud, Bearings Ball, Thermal Protection Auto, Rotation CW/CCW, Body Dia. 5-5/8″, Length Less Shaft 9-27/32″, Shaft Dia. 5/8″, Shaft Length 1-7/8″, Capacitor Included Yes, Capacitor Required Included, Resilient Ring Dia. 2-1/4″, Ring to Ring Center 9-1/2″, Stud Pattern 3-5/8″, RPM Range 1701-1800WARNING: California ResidentsThis product can expose you to chemicals including Styrene, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
2. Leeson Farm Duty Electric Motor – 3/4 HP, 1,725 RPM, 115/208-230 Volts, Single Phase, Model Number M6C17FB9
Description
‘General Purpose Farm Duty Motor, Capacitor-Start, 3/4 HP, Nameplate RPM 1725, Voltage 115/230, 1 Phase, Frame 56, Totally Enclosed Fan-Cooled, Full Load Amps 10.8/5.4, 60 Hz, Rigid Base Motor Mounting Type, Motor Thermal Protection Manual, Ins. Class B, Motor Service Factor 1.15, Ball Motor Bearings, Max. Ambient Temperature 40 Degrees C, CWSE Motor Shaft Rotation, Overall Length 11 In., Shaft Dia. 5/8 In., Shaft Length 1-15/16 In., Frame Material Rolled Steel’
3. Hallmark Industries MA0507A AC Motor, 3/4 hp, 1725 RPM, 1PH/60 hz, 115/208-230V AC, 56C/TEFC, Cap Start, with Foot, SF 1.15, Steel (Pack of 1)
Description
AC motor, 0.75 HP, 1725Rpm, 1pH/60Hz, 115/208-230V, 56C/TEFC, cap start, Univ foot, sf 1.15, no Electrolysis.
4. A.O. Smith GF2024 Century Resilient Base Split Phase Electric Motor, 115 Vac, 5.4 A, 1/4 Hp, 1725 Rpm
Description
Century Electric Motor, Resilient Base, Split Phase, Century, 115 VAC, 5.4 A, 60 Hz, 1/4 hp Power, Number of Phase: 1, 1725 rpm, 1/2 in Shaft Diameter, 1-1/2 in Shaft Length, Service Factor: 1.35, CW/CCW Rotation Type, Sleeve Bearing, Cradle Mounting, 1-3/8 in Mounting Hole Center, 54 % Efficiency, 40 deg C Ambient, Class B Insulation, Open Drip proof. Split phase motor, 5.4 amps, 60 hertz, auto protector, Sleeve Bearing, 1/2-Inch x 1-1/2-Inch shaft.
5. 1/4hp 1725RPM 48/56Frame 115 volts Belt Drive Furnace Motor Century # GF2024
Description
Century Belt Drive Fan Motor 1/4 HP
6. A.O. Smith B2852 3/4 HP, 3450 RPM, 1 Speed, 230/115 Volts, 5.4/10.8 Amps, 1.25 Service Factor, 56Y Frame, PSC, ODP Enclosure Square Flange Pool Motor
7. A.O. Smith/Century DL1056 1/2 HP, 1075 RPM, 3 Speed, 115 Volts6.5 Amps, 48 Frame, Sleeve Bearing Direct Drive Blower Motor
Description
Direct drive fan & blower motor, reversible rotation.
8. A2728, 70C 1/4HP Condenser Fan Motor, 1075RPM
Feature
- 70C 1/4HP AC Condenser Fan Motor, 1-speed at 1075 RPM, 208~230V, 1.8 AMP
- Capacitor (not included): 5 MFD/370V
- Replaces: AOS Century FE1026SF, Emerson: 1860H, MARS 20728, GE/Genteq 3732HS, York Source 1: S1-FHM3728HT, Wagner: WG840728HT
- Designed for 70 C degree / 158 F ambient temperature vs usual 60 C version. These motors use more material so that when the motor runs it generates less heat therefore won’t trip in high temperature areas such as Arizona
- All Angle, ball bearing
- Trane 4.33 bolt circle mounting holes with self-tapping screws in a bag
- Rheem mounting holes w/screws installed
- Water slinger on shaft
- Thru-bolt or band mounting
- Extra set of nuts on mounting studs
- Class B insulation
- Single phase, 60 hertz
- 70 C / 158 F
- Thermal overload protected
- Fan duty, continuous, air over
- Totally enclosed non-ventilated
- 36 inch leads
- Reversible rotation
- Directly from Broad-Ocean, one of the top 3 leading HVAC motor manufacturers. You will find them on millions of HVAC units including Carrier, Goodman, Trane and other brands
- If you are a distributor, please continue your normal channel to source Broad-Ocean motors. Thank you. This retail venue is for contractors, repair technicians, and do-it-yourselfers, who otherwise may not have been adequately served with Broad-Ocean motors
Description
Designed for 70 C degree / 158 F ambient temperature vs usual 60 C version. These motors use more material so that when the motor runs it generates less heat therefore won’t trip in high temperature areas such as Arizona
9. A.O. Smith GF2034 Century Resilient Base Split Phase Electric Motor, 115 Vac, 6.8 A, 1/3 Hp, 1725 Rpm
10. Consew CSM1000 Sewing Machine Electric Servo Motor, 110 Volt, 3/4HP, 550W
Feature
- Brand New Consew CSM1000 Industrial Sewing Machine DC Electric Brushless Servo Motor.
- Energy Effient – Saves up to 70% Electricity. 3/4HP, 550 Watts Powerful Heavy-Duty electric servo motor for any type of industrial sewing machines for light to heavy duty work including straight stitch machines, overlocks, zigzag stitching machines, blindstitch machines, heavy duty walking foot and heavy duty upholstery machines.
- Used same mounting holes as standard clutch motor
- No clutch or brake disk required, can turn machine handwheel easily to position needle
- 110 Volt, 3/4HP (550 watts), 1 Phase, 50/60hz
Description
Brand New Consew CSM1000 Industrial Sewing Machine DC Electric Brushless Servo Motor. Energy Effient – Saves up to 70% Electricity. 3/4HP, 550 Watts Powerful Heavy-Duty electric servo motor for any type of industrial sewing machines for light to heavy duty work including straight stitch machines, overlocks, zigzag stitching machines, blindstitch machines, heavy duty walking foot and heavy duty upholstery machines. Uses the same mounting holes as a clutch motor No noise or vibration when machine is not running Draws minimal electricity when machine is not running High Torque D.C. Electronic Servo Motor Easy to adjust speed & motor direction with buttons No clutch disc Adjustable belt tightener Belt guard, pulley & mounting hardware included Light weight Approx, 10-12 lbs. (5 kgs) Starts-up at low speed Works well on heavy duty machines Speed : 0 – 4,200RPM 110 Volt, 3/4HP (550 watts), 1 Phase, 50/60hz
Conclusion
By our suggestions above, we hope that you can found 4 Hp Electric Motor for you.Please don’t forget to share your experience by comment in this post. Thank you!