The Best 3D Printer Water Cooling System
Nowadays, there are so many products of 3d printer water cooling system in the market and you are wondering to choose a best one.You have searched for 3d printer water cooling system in many merchants, compared about products prices & reviews before deciding to buy them.
You are in RIGHT PLACE.
Here are some of best sellings 3d printer water cooling system which we would like to recommend with high customer review ratings to guide you on quality & popularity of each items.
552 reviews analysed
1. 3D Printer All Metal Water-Cooled Hotend Bowden-fed Liquid Cooling Hot End, for Titan Aqua Water Cooling, for High Temperature 3D Printing peek PA
- Filament Size: 1.75mm
- nozzle size: 0.4mm
- Package: Only 1 hotend, No wires
- the heating block with 3.1mm hole for temperature sensor will be shipped with the hotend, so that customer can use it for thermocouple like PT100, K-type and so on.
- Compared with the air cooling hotend,the highly efficient liquid cooling can be effective for any currently available 3D printing materials.
Nozzle diameter: 0.4mm
Feed inlet diameter : 1.75 diameter Inlet
We use the Red hard plastic material fittings (suitable for OD4mm guiding tube), so that the connector be more stable.
Our hotend is made with high quality material, and great drilled.
2. ANYCUBIC Photon Zero 3D Printer, LCD Resin 3D Printer Assembled with 16X Anti-aliasing Function and UV Cooling System & Upgraded UV Module, Build Size 3.81"x2.12"x5.9", Black
- 【Entry-level Resin Printer】: Able to start printing in 5 minutes after put on building platform and resin vat
- first choice for stepping your toes into 3d resin printing
- 【Excellent Accuracy】: Parallel LED and 16X Anti-aliasing Function make your prints with much smoother details, better than regular resin printer and FDM printer
- 【UV Cooling System】: Especially equipped with the cooling system for stabilizing printing performance and extending the 3d resin printer’s service life
- 【Humanized Design】: Marks in resin vat and integral FEP film allows you easily to see your resin amount and replace the consumable FEP
- Super easy to operate
- 【After-sale Service】: All ANYCUBIC 3D printer are backed with 1-year assurance (consumables excluded) and lifetime technical support
3. Thermaltake Pacific M240 D5 Res/Pump PETG Hard Tube Water Cooling Kit CL-W216-CU00SW-A
- W3 Water Block: 0.15mm internal fin construction, a copper base with anti-corrosive nickel plating and high-quality PMMA cover, and a universal mounting mechanism
- PR15-D5 Res/Pump Combo: Featuring exceptional performance and unrivalled reliability, the PR15-D5 is manufactured from high quality POM and PMMA material to provide a high performance solution
- R240 Radiator: Manufactured from high-quality German aluminum alloy and aerospace-grade materials, this radiator provides exceptional performance
- Ring 12 RGB Radiator Fan: 3 patented circular 256 multicolored 120mm RGB radiator fans with high-static pressure design, one smart fan controller included
- C-Pro Compression Fitting: With special four rubber O-rings leak-free design and patented structure for ultimate loop management. 8 compression fittings are included in the kit
The Pacific M240 D5 Hard Tube Water Cooling Kit is an efficient, yet quality liquid cooling solution for all water-cooled gaming systems. Inside you will find a W3 CPU water block, PR15-D5 pump/reservoir combo, R240 radiator, C1000 Pure Clear coolant, 3 Ring 12 RGB fans, 8 C-Pro compression fittings, 2 adapter fittings, 4 PETG hard tubes and other accessories. 2 year warranty.
Dimension: 518(L) x 198 (W) x 223 (H)
Compatibility: Intel LGA 2066/2011/1366/1156/1155/1151/1150/775
AMD AM4/FM2/FM1/AM3+/AM3/AM2+/AM2(CPU Socket)
Pump & Reservoir:228.1H) x 87.4(W) x 94.2(L) mm
Radiator : 39.9 (H) x 120.7 (W) x 273 (L)
Tube Dimension: OD : 16mm , ID : 12mm , L : 500mm
Fan Spec: 1500 RPM (1000RPM with LNC)
Coolant: Pure Clear Coolant
CPU Water Block
– Pacific W3 CPU Water Block x1
– Pacific PR15-D5 Pump/Reservoir Combo x1
– Pacific R240 Radiator 39.9 (H) x 120.7 (W) x 273 (L) mm x1
– Pacific C-Pro G1/4 PETG 16mm OD Compression – Chrome x6
– Pacific G1/4 90 Degree Adapter – Chrome x2
– Riing 12 LED RGB 3 Pack x1
– Thermaltake C1000 Pure Clear Coolant x1
– V-Tubler PETG Tube 16mm OD 500mm 4Pack x1
– Silicone Insert 900mm Tt Premium Edition
– Intel and AMD Universal Backplated & Mounting Kit
– 24pin ATX Bridge Tool x1
– Thermaltake Thermal Grease x1
4. EKWB EK-KIT Performance Series PC Watercooling Kit P360
- Universal CPU water block: EK-Supremacy EVO (incl. LED diode, mounting- & thermal material)
- Water pump-reservoir combo: EK-XRES 140 Revo D5 PWM (incl. pump)
- Radiator: EK-CoolStream PE 360 (Triple)
- Compression fittings: EK-ACF Fitting 10/13mm (3/8” – 1/2”) – G1/4 Nickel (6 pcs)
- Radiator fan: EK-Vardar F3-120 (1850rpm) (3pcs)
The EK-KIT P360 is the ultimate liquid cooling kit dedicated to all users who seek the easiest way to start with their first custom loop at the best price-performance ratio on the market! Everything you need to assemble your first custom loop with carefully chosen components that will last you a long time!This water cooling kit is compatible with the following CPU sockets: Intel LGA-1150/1151/1155/1156, Intel LGA-2011(-3), Intel LGA-2066, AMD Socket AM4.
5. Noctua NT-H1 Pro-Grade Thermal Compound Paste (Gray) 1.4 ml, 3.5g
- Renowned premium-grade thermal compound for optimal heat-transfer from the CPU or GPU to the heatsink
- more than 150 awards and recommendations
- High-end thermal compound to reduce temperatures on PC applications and electronics
- Trusted Noctua quality with excellent long-term stability: recommended storage time up to 3 years, recommended usage time on the CPU up to 5 years
- 3.5g pack for around 3-20 applications (depending on CPU size, e.g. ~3 applications for TR4, ~20 for LGA1151)
- Not electrically conductive and non-corroding thermal grease: no risk of short-circuits and safe to use with all types of heatsinks
6. Elegoo EL-KIT-008 Mega 2560 Project The Most Complete Ultimate Starter Kit w/Tutorial for Arduino UNO Nano
- The MEGA2560 complete starter kit with more than 200pcs components, premium quality for Arduino kit
- Free pdf tutorial in the cd (more than 35 lessons)
- Lcd1602 module and gy-521 sensor module with pin header ( no need to solder by yourself)
- Nice package with clear listing and surprise including a nice small box to keep the widget such as LED, IC, buttons, diodes, etc.
- We have always cared about the customer experience and improve the product function details
7. MIYAKO 110V AC CPU Cooling Fan Super Silent 2700 RPM 7 Blades 4.75” x 4.75” x 1.5” inches 0.23A Ideal for Computer Cases, 3D Printers and Radiators (FA-116)
- Metallic 110V AC, 0.23A, easy to be connected with your computer motherboard or 3D printer power system
- Low-Noise 3 to 2-pin Adaptor and Polarity Protection for full flexibility, Fan Life Expectancy : 50,000 hours, RoHS compliance for protecting the environment
- Air Flow: 8.5CFM, Speed: 2700 RPM, Fan Size: 120 X 120 X 25mm / 4.7 X 4.7 X 1inch or 4 ¾ x 4 ¾ x 1 inch (L*H*W)
- Equipped with sleeve bearing and 7 strong blades ensure quiet and powerful air flow that enhances cooling performance
- Thanks to its streamlined, compact motor design, the FA-116’s motor hub is smaller than with conventional 6cm fans. This allows for more blade surface area and thus contributes to the superior airflow and pressure performance.
MIYAKO Silent Brushless Cooling Fan 120mm X 120mm X 25mm Sleeve Bearing 7 Blades Super Silent Fan
Case cooling is becoming more essential these days. The better airflow inside your system, the cooler and more stable system you will get. This 110V AC brushless case cooling fan is equipped with long lasting sleeve bearing and 7 powerful blades to ensure large and strong air flow up to 8.5CFM at a low noise of less than 20dB. Comes with 2.5 mm pitch 2P connector easy to connect with your computer, 3D printer, CCTV system, etc.
- Working Voltage: AC 110V
- Working Current: 0.23A
- Air Flow: 8.5CFM
- Speed: 2700 RPM
- Noise: 20dB
- Fan Size: 120 X 120 X 25mm/ 4.7 X 4.7 X 1inch or 4 ¾ x 4 ¾ x 1 inch (L*H*W)
- Package Includes 1X FA-116 110V AC 0.23A Brushless Cooling Fans
- MIYAKO has many years of experience on electronic industry products
- We have a team of electronic engineers ready to provide technical assistance and help with any question you might have
- We love to take care of our customer that why we offer a 30 days money back no questions asked refund or replacement on all defective or broken items
- Looking forward to your inquiry and hope to build long term cooperation relationship with you!
- Planning on buying more than one unit? Let us know, we had love to offer a discount for your bulk purchase with us
8. Noctua NF-P12 redux-1700 PWM, 4-Pin, High Performance Cooling Fan with 1700RPM (120mm, Grey)
- Renowned NF-P12 high-end 120x25mm 12V fan, more than 100 awards and recommendations from international computer hardware websites and magazines, hundreds of thousands of satisfied users
- Pressure-optimised blade design with outstanding quietness of operation: high static pressure and strong CFM for air-based CPU coolers, water cooling radiators or low-noise chassis ventilation
- High-efficiency 1700rpm 4-pin PWM version supports automatic motherboard speed control for maximum flexibility: powerful airflow output when required, virtually silent at idle
- Streamlined redux edition: proven Noctua quality at an attractive price point, wide range of optional accessories (anti-vibration mounts, S-ATA adaptors, y-splitters, extension cables, etc.)
- Trusted premium brand, time-tested SSO bearing system with more than 150,000 hours service life (MTTF) and 6-year manufacturer’s warranty
9. ASHATA 10 Pcs Heat Sink with Adhesive for Stepper Motor Driver, Aluminum Cooling Fin with Back Glue for 3D Printer DIY Tools Replacement Component
- Professionally designed and suitable for 3D printer stepper motor driver
- Adopting special design and aluminium material to achieve faster heat dissipation
- The fins increase the area of board and improve the cooling effect
- High quality and durable with long service life
- Easy to install, use back glue to install this heatsink
This stepper driver heatsink is designed for 3D printer to make it work more stable and smoother with no stuck. The aluminium material and special design enable it to dissipate heat faster. It’s very reliable and practical.
1. Professionally designed and suitable for 3D printer stepper motor driver.
2. Adopting special design and aluminium material to achieve faster heat dissipation.
3. The fins increase the area of board and improve the cooling effect.
4. High quality and durable with long service life.
5. Easy to install, use back glue to install this heatsink.
Suitable: for 3D Printer TMC2100 / LV8729 Stepper Motor Driver
Quantity: 10pcs / Set
Size: Approx. 14.45 * 14.30 * 13.30mm / 0.6 * 0.6 * 0.5in
10 x Stepper Driver Heatsink with Back Glue
10. Mavel Star 12v dc Submersible Mini Water Pump PC CPU Water Cooling Pump 63 GPH
- 63 GPH 4.2W 0.35A, Perfect PC Cpu Cooling pump,running it on 5/16 id vinyl tubing will be good
- 12 volt dc Submersible Centrifugal Water pump, NOT Self-priming ,design to be submerged,can be powered by battery pack, solar pannle or 12 dc power adapter, please Search ASIN (B0713T89R1 ) for the power adapter.
- Nice water pump For the Water fall,Water feature or Water foutain in Home & Garden,can be powered directly by a power adapter,please Search ASIN (B0713T89R1) for the power adapter.
- Perfect for the transfering of Water,acid or alkaline solution.
- Max working temperature: 60℃ /140F
Material: PA66+Glass fiber
Power consumption: 4.2W
Rated voltage: 12V
Rated current: 0.35A
Max flow rate: 240L/H (63G/H)
Max static head: 3m (9.8ft)
Diameter of inlet: 8mm(0.31 inch thread)
Diameter of outlet: 8mm(0.31 inch thread)
Noise: Waterproof level: IP68
Lifespan: More than 30,000hrs
Power supply: DC electric source (bared wire)
Driving method: Brushless, Magnetic
Max working temperature: 60℃/140F
Item dimension: 51mm*34mm*42.7mm
1. Working at rated voltage (DC12V/0.35A). The positive pole is red wire, the negative pole is black wire/blue wire.
2. This pump is centrifugal pump, it can’t vent the air automatically, so it must be operated by submersible installation. (If outside water installation, you should make sure it is installed below the liquid surface)
3. When blocking, long-running is not allowed.
4. Preventing any hard particles entering the pumps.
How to Choose pump:
1. Make sure the working voltage, current, head and flow. The Max head means the static head. The pump can lift to the max height when there is no flow. If you want special flow at special height, you must choose more higher head than the height you want to pump;
2. Make sure the dimension (threaded interface or not, the direction and diameter of outlet and inlet);
3. Working environment (temperature and medium);
4. Other functional requirements, such as time control, motion control, pressure control, flow control, and speed adjustment.
1 * Water pump
By our suggestions above, we hope that you can found 3D Printer Water Cooling System for you.Please don’t forget to share your experience by comment in this post. Thank you!